gramps/LlamaCasty
0
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Audio: speech leveler (auto gain to -20 dBFS speech, -6..+20 dB, gated) between gate and compressor; honest mic meter (drop the +10 dB display boost and x1.2). Creator upload measured -28.5 LUFS; same audio through the new chain: -17.9 LUFS / -0.7 dBFS peak (Unit: audio loudness)

Browse Source
This commit is contained in:
gramps
2026-10-09 13:27:53 -07:00
parent 8303b1cf7f
commit b140024ebf
7 changed files with 169 additions and 26 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Services/index.md
+1 -1
View File
@@ -64,7 +64,7 @@ External-facing logic: YouTube API, persistence. See
| `Audio/WasapiLoopbackAudioSource.cs` | Desktop/game capture: NAudio `WasapiLoopbackCapture` on the default render device — automatic at unity; the game bar's meter consumes it |
| `Audio/WasapiMicAudioSource.cs` | Mic capture: NAudio `WasapiCapture` with the device resolved by `FriendlyName` matching `MicSourceName` (DisplayName only), default capture endpoint fallback; name provider `Func<string?>` re-read at each `Start` so a device picked mid-session takes effect immediately (the mixer restarts the mic on pick) |
| `Audio/AudioMixer.cs` | Owns both sources; capture starts once at startup (`MainViewModel.StartMicCaptureAsync`) and stops on `Shutdown` — NOT go-live (preview monitoring). Mic samples → `AudioLevelMeter` → `MicLevelChanged`; loopback samples → the game bar's meter via `LoopbackLevelChanged`. Surfaces mic connection state: `MicConnected`/`MicFailed` (drives the status dot) + `RestartMic()` (device swap mid-session, keeps loopback). Failures log via `AppLog`; mic failure zeroes the meter, loopback failure doesn't kill the mic. Note: the meter `Push` is unconditional (the `?.` on the event would otherwise skip the argument when nothing is subscribed). **TASK 47 — alert audio:** `EnqueueAlertAudio` writes a dedicated 8s stereo-48k ring (`AlertBufferSeconds`), drained in `FillAndMix` pre-limiter and added at **unity (never ducked)**; `StartLive` clears the ring |
| `Audio/AudioLevelMeter.cs` | Pure smoothed RMS level (0..1): `Push(AudioSample)` + `Reset` — the unit-tested math behind `AudioLevel` and `GameAudioLevel`. `ToDisplay(float)` maps the raw linear RMS onto the meter's display scale (−60..0 dBFS spread across 0..1, with **+10 dB input amplification** so real speech peaks hit the red zone at maxed volume) — real speech/game RMS (~0.01..0.1) would otherwise leave a flat scale looking dead; ≤0.001 linear reads as zero (never idles on background noise) |
| `Audio/AudioLevelMeter.cs` | Pure smoothed RMS level (0..1): `Push(AudioSample)` + `Reset` — the unit-tested math behind `AudioLevel` and `GameAudioLevel`. `ToDisplay(float)` maps the raw linear RMS onto the meter's display scale (−60..0 dBFS spread across 0..1 — **honest since 2026-10-09**: the old +10 dB display boost made a −30 dBFS voice look dialed in; leveled speech (−20 dBFS) now sits at 2/3 of the bar) — real speech/game RMS (~0.01..0.1) would otherwise leave a flat scale looking dead; ≤0.001 linear reads as zero (never idles on background noise) |
| `Audio/WaveToFloat.cs` | Pure WASAPI buffer → float conversion: IEEE float 32-bit direct, PCM 16-bit normalized, `WaveFormatExtensible` IEEE-float subformat GUID, trailing partial samples ignored |
| `Audio/MasterLimiter.cs` | **Master output limiter**: a **−1 dBFS ceiling** (`Ceiling = 0.891`) applied after the live mix so the honest gains can never sum past 0 dBFS and clip the AAC encode. Instant attack per frame (a hot frame is scaled exactly to the ceiling — no overshoot), smoothed release toward unity so loud passages don't pump. Pure — unit-tested |