The vertical tier is a centred band crop of the SAME 1920x1080 master (band x
656.25, w 607.5, h 1080), so the 16:9 camera placement (x~1408) falls outside the
cropped window and the creator is simply not in the vertical stream. Each scene
now keeps its own vertical position, size and shape; switching back to 16:9
restores the desktop layout exactly (the creator's locked table, 2026-10-17).
Geometry only - NO render-path change. The preview and the compositor both read
the element's own X/Y/W/H + ClipShape, so the tier switch swaps the LIVE geometry:
- Models/VerticalCameraLayout.cs (new): the pure math - the band, its two 607x540
areas, the six spots (top/bottom x left/centre/right), the 32px inset and the
270x152 default tile (480x270 in the 1080x1920 output) in the bottom-right spot,
the corner the 16:9 default webcam uses.
- Models/WebcamSceneConfig.cs: the vertical placement lives in seven additive
columns (VerticalX/Y/Width/Height/ClipShape/RectWidth/RectHeight; NULL = "this
scene has no vertical placement yet"). The 16:9 layout stays in the old columns
and is parked in the transient Landscape* fields while the vertical tier is
live; Begin/EndVerticalLayout + CommitLiveLayoutToVertical do the swap. The
X/Y/W/H overrides clamp every write into the band - outside it the camera is
invisible in the vertical output.
- Models/SceneElement.cs: X/Y/Width/Height became virtual so the derived element
constrains every writer (drag, resize handle, typed fields) in ONE choke point
instead of three writers each re-implementing the rule.
- ViewModels/MainViewModel.Webcam.cs + .Streaming.cs: IsVerticalTier/VerticalBand,
ResolveVerticalCameraLayout(s) (the tier swap), MoveWebcamInVerticalTier /
SnapWebcamInVerticalTier (the six-spot snap, by the tile's centre),
EnsureVerticalCameraLayout; ApplyStreamQuality is the tier-change hook. The
Live scene gets its small tile automatically on the first vertical switch (the
vertical stream would otherwise have no camera at all); the other scenes keep
their 16:9 placement until the creator drags them into the band.
- Controls/PreviewPane.xaml.cs: the drag/resize route through the VM snap under
the vertical tier instead of free-floating over the master.
Controls/LeftPanel.xaml: the webcam properties gained a Geometry section
(X/Y/W/H) for the manual entry the creator asked for, bound to the LIVE
placement, gated on the VM's IsWebcamSelected (NOT SelectedElement.IsWebcam -
the TASK 51 test finds that panel by binding text and would match twice).
- The store: seven guarded ADD COLUMNs, the INSERT/SELECT extended, and the
X/Y/W/H/ClipShape columns stay the 16:9 layout - while the vertical tier is
live the save writes the parked values there and the live ones into Vertical*.
Test: ytLive.Tests/VerticalWebcamLayoutTests.cs - the ONE Good Dog test. The
vertical tier brings the Live camera INTO the band as a small tile; dragging it to
the top-right lands it top-right inside the band; back to 16:9 the desktop layout
is restored exactly (1408/778/480x270); both placements survive a save + reload.
Full suite 429/429, 0 warnings. LayerReorderPersistenceTests.RealMouseDrag fails
ALONE on a clean tree in this environment - pre-existing flake, proven by stashing
this work, not a regression.
Derivative work: OBS has no built-in per-aspect-ratio layout storage - the
maintainers' answer is "create a second scene and add the scene you want to send
as source" (obsproject.com/forum/threads/161307) - and Streamyard's dual-aspect
guide says the same ("no built-in way to store separate layouts per aspect ratio",
so you rely on manual workarounds and plugins):
https://streamyard.com/blog/dual-aspect-ratio-streaming-tool
Our per-scene, per-tier stored placement, resolved on the tier change, is the
step past both.
Memory in the same commit: ai.md (new section), TASKS.md + TASKS/task-57-*.md
(Unit 1 shipped, Unit 2 = the Chat scene still open), HANDOFF.md, MyMistakes.md
(the per-tier geometry-swap recipe, the binding-text panel trap, the store's
webcam-identity rule) and the Models/Services/ViewModels/Controls index rows.
Right-click in the live preview now procs a box that is actually visible and
populated with the zoomed region, and each Zoom View Shape sculpts the box per
spec. OBS-style derivative: magnifier box shows the composited region and dims
the surroundings (same pattern as OBS "zoom" / preview region highlights).
Root causes of the invisible box (two WPF traps, recorded in MyMistakes.md):
- Empty <VisualBrush Stretch="None"/> used as an OpacityMask paints nothing,
so the mask alpha is 0 and the WHOLE box (border included) went transparent.
- ZoomBox lived inside CanvasGrid while its VisualBrush sampled CanvasGrid — a
circular reference WPF renders as nothing. Hoisted ZoomBox to a sibling of
CanvasGrid inside a new PreviewCanvas wrapper (same 1920x1080 space).
Shape semantics (MainViewModel.ActivateZoom):
- Circle: square, click point = center.
- VerticalRectangle (phone): tall 9:16, click point = top-left corner.
- HorizontalRectangle (tablet): wide 16:9, click point = top-left corner.
- Boxes stay fully inside 1920x1080 via Math.Clamp.
UI: ZoomRectOutline/ZoomCircleOutline shapes replace the square Border;
circle clips the box to an EllipseGeometry; brush Visual released when inactive.
Zoom View Shape dropdown now uses the standard YtComboBox style.
Test (Good Dog rule, one integration test): ZoomBoxInteractionTests verifies
aspect/anchoring/clamp per shape and the matching outline+clip in the real
MainWindow. Full suite 404 passed, 0 warnings.
Memory: HANDOFF.md zoom state updated; WPF VisualBrush traps appended to
MyMistakes.md.
The logs answered the question and closed off a whole branch of investigation.
The long run: broadcast inserted 14:17:04.577, ffmpeg to
rtmp://a.rtmp.youtube.com/live2/5f6z-... at 14:17:05.686, and ffmpeg's own
muxing summary at 14:18:56.473 reads
video:101229KiB audio:1419KiB muxing overhead: 0.202949%
~99MB of real video plus audio over 112s, which is what 8000+128 kb/s is
supposed to produce. No socket error, no 4xx from ingest, no reconnect. And the
broadcast still never left `ready`; close-out 403'd invalidTransition again. The
8s run behaved the same way, so "YouTube needed longer" is disproven — 112s is
longer.
So the RTMP path is provably healthy. That is the finding worth keeping: it
kills the entire "the push is broken" theory, which is where this had been
heading for a week. The break is between ingest being accepted and the broadcast
being told to start.
Which puts the binding in frame, and the app was structurally blind to it.
Google documents contentDetails.boundStreamId and says enableAutoStart fires
"when you start streaming video on the bound live stream" — both valid on
insert, neither restricted against reusable streams. But the migration guide
also says a broadcast "is not bound to any streams at the time that it's
created", and the failure that produces is invisible from the RTMP side
precisely because a reusable stream will happily accept bytes for an unbound
broadcast. Ingest succeeding proves nothing.
Hence LogBroadcastDiagnosticsAsync, riding the existing health poll rather than
adding a timer. One greppable line: lifecycle status, privacy, recording,
boundStreamId *compared against the stream id we are actually pushing*
(BoundMatches: yes / MISMATCH / NO-BINDING / unknown), boundStreamLastUpdate-
TimeMs, autoStart/Stop, liveChatId presence, the stream's own streamStatus and
activeLiveChatId, and the CDN settings we declared.
Deliberately self-limiting: _broadcastSeenLive latches on live/liveStarting so
the diagnostic shouts only while the broadcast is stuck and goes quiet once it
is healthy. A permanent per-tick log line would be noise; this is the opposite.
One test, per the Good Dog rule: BroadcastBindingTests pins the matrix and
specifically pins `unknown` when there is no stream id to compare against, so a
missing expectation can never be misreported as a match — that is the failure
that would make this diagnostic lie.
Suite 387/387, 0 warnings.
Creator on the live build: 'why do you make the youtube user icon go away?'
The TASK 42 one-surface bar had scoped the account zone to Stream only
('Record world has no YouTube identity at all'), so arming REC dropped the
avatar and the bar height bounced with it ('really fucking annoying').
Fix: ShowSignInButton / ShowAvatarButton are now plain !IsConnected /
IsConnected — app-level identity, present in both worlds, so the right
column never pops in/out and the bar height stays pinned. Test remains a
child of Stream (still stream-armed AND signed-in).
TopBarModeTests updated to the new contract: signed-out Record world shows
Sign In; flipping back to REC keeps the avatar. PillRadioTests untouched
(it only exercises the ON-AIR face). Docs corrected in-place (ai.md state
model, TASK 42 scope). Gate: clean build 0-warnings, 316/316, scope passed.
The bar now renders ONE surface from the FIRST decision the creator makes —
Record or Stream — with each world being the whole bar. Creator directive:
"I wrote the fucking thing and I still can't figure-out how to do stuff",
"forget this one dog plan bullshit". OBS/streaming-tool reference for the
one-surface paradigm: https://obsproject.com (single mode toggle + context
actions) — cited per spin-guard habit; the go-live/test pattern follows
CEV (https://cev-desktop.aSean.xyz) precedent.
- Mode: single segmented REC|ON-AIR switch (SegmentToggle/SegmentLabel in
Themes/Controls.xaml); radio-exclusive world selection, one tap to flip.
- Record world: switch + Start Recording, zero YouTube identity.
- Stream world: switch + Go Live + Test + account zone right (Sign In until
connected, then avatar with Change Account/Logout context menu).
- Test is a child of Stream: procs only stream-armed AND signed-in.
- Running: one reality line "dot word elapsed" (REC/LIVE/TEST; green/red/
gold) + End; worlds + switch retire.
- Gear moved up from bottom bar, ~3 wordmark letters past the brand, single
click opens Settings/Bug/Feature/About menu (TASK 40 Unit B shipped early).
- Fix folded in: BeginTestStream now arms OnAirPillOn explicitly (unarmed
pump booted with zero encoder outputs -> "At least one output is required"
forced-stop cascade from TASK 41's pipeline).
- VM: world/reality props + RaiseTopBarModes() wired into StreamStatus,
pill, IsRecording, IsTestStream, IsConnected setters.
Doc: ai.md top-bar model, ViewModels/index.md, Controls/index.md, TASKS.md,
HANDOFF.md, new TASKS/task-42-top-bar-redesign.md; task-40 note.
Tests: TopBarModeTests.cs (new Good Dog), PillRadioTests + TestStreamTests
gates updated. Build 0 warnings; full suite 314/315 — single abort is the
pre-existing env-dependent RealMouseDrag test (Path of Exile 2 running)
Test button next to Start runs the real private-only go-live pipeline as a
session variant (IsTestStream): BeginTestStream -> extracted
StartStreamingSession(alsoRecord:false) shared with the dialog path — no Go
Live dialog, no 'last live' stamp, no recording. Gold top bar + TEST badge +
'End Test' button face; TEST drawer (third right-rail pull-out, three-way
exclusivity) auto-opens once the liveChatId resolves.
Chat tooling: Mock Chat Input sends a REAL liveChat/messages.insert
(YouTubeStreamService.InsertChatMessageAsync) that round-trips the real ~2s
poll and renders through the live overlay; simulated Subscriber/New
Member/Super Chat events inject through the poller's MessageReceived seam
(YouTubeChatService.InjectSimulatedMessage, ChatMessage.IsSimulated) — the
insert API only creates textMessageEvent, so non-text events are local-only
by design (ref: developers.google.com/youtube/v3/live/docs/liveChatMessages/insert).
Scopes youtube + youtube.force-ssl already cover insert; no re-consent.
Good Dog: ytLive.Tests/TestStreamTests.cs — coordinator protocol with fake
HTTP + real-window drawer exclusivity/gate. 0 warnings; 314/314 pass (clean
run; intermittent host abort is the pre-existing WinRT-webcam flake).
Docs ride in the same change: TASKS.md row 41, TASKS/task-41-test-stream-mode.md,
ai.md (YouTube Live API constraints), HANDOFF rewrite.
The record-OR-live ruling (2026-09-01) was documented in ai.md but the
'pills = radios' UI constraint never landed — both pills could be armed and
StartSession/BuildEncoderOptions would dual-encode to the YouTube ingest AND
a local file at once, streaming a concurrent disk write off the same ingested
Kbps (cripples the stream on mid-range chassis; 'the VOD is already the copy').
The pill setters now clear one another (silent mutual clear); the dual-block
ffmpeg machinery stays generic and unreachable from the UI by design.
Take two (2026-09-01) three confirmed defects, all from creator feedback + the
new resolver logging:
1. NO WEBCAM IN OUTPUT: WebcamSceneConfig.WebcamId carries the identity GUID;
CameraManager keys sessions by DEVICE id — GetLatestFrame(guid) returned null
forever, the compositor silently dropped the layer while the preview (bitmap
path) looked fine. The resolver logging added in 8dcaee0 caught it red-handed.
DeviceKeyForWebcam maps identity->device through the _webcam singleton (identity
mismatch / unknown ids pass through). Test: WebcamOutputKeyTests.
2. START BUTTON VANISHED AFTER STOP: my pills-clear ruling met the old
ShowPrimaryStartButton gate (needed IsConnected or a lit REC pill) — signed-out,
pills-off = blank top bar, no session reachable. Start is now ALWAYS the idle
face; unarmed Start records (local needs no account — no dead-end no-op); the
Sign In button folds into Start's context menu ('Sign in to YouTube', shown while
disconnected) with a dedicated SignInCommand. SessionTeardownTests extended:
stopped session must leave a reachable Start.
3. TOP BAR ORDER (creator spec): [sign light] REC [pill] [sign light] ON-AIR [pill]
— each reality lamp now sits in front of its own intent switch (was: two pills,
then two orphaned dots). Sign labels keep the shared StatusSignText style.
Tests: WebcamOutputKey, SessionTeardown, FramePump, WebcamMenuGate, GlobalHotkey,
BroadcastPullOut — 14/14 across the six classes, clean build 0 warnings.
Creator ruling 2026-09-01 (stuck REC pill after the failed first recording):
- StopStream clears RecordPillOn + OnAirPillOn — intent resets with reality.
- OnFramePumpFailed: dispatcher-marshalled FULL rollback via StopStream (was:
toast + Error-status only when live — record-only sessions zombied with
IsRecording=true over a dead encoder; the 20:34 attempt proved it). Toast copy
says 'Recording stopped' vs 'stream pipeline stopped'.
- Same zombie class in the three go-live prep failure branches: StreamStatus.Error
limbo replaced by StopStream() (audio loop + recording + pills unwind; a created
broadcast still gets the close-out).
- AudioMixer.StopLive made explicitly idempotent (Stop() twice, rollback paths that
never reached StartLive).
- Seams: OnFramePumpFailed + IsRecording setter internal (InternalsVisibleTo; test
pattern mirrors LayoutPathOverride).
ONE integration test: SessionTeardownTests (real window + temp DB: pump death with
lit pill -> no zombie, no End button, Offline). AudioPipelineTests confirmed to hang
STANDALONE (pre-existing, the declared-known audio class) — ai.md test-count
paragraph corrected to stop claiming a suite total that cannot currently be measured.
The original premise (extract FFmpegEncoder / StreamHealthMonitor / FramePump
classes) was a no-op — those already exist as Services/Encoder/FfmpegEncoder.cs
and Services/Encoder/FramePump.cs. The honest functional seam was the local
recording-output concern, which was interleaved with live-stream orchestration:
- New MainViewModel.Recording.cs (121): StartRecordFile, FinalizeRecordingAsync,
UniquePath, ChooseRecordFolder, ResetRecordFolder, DefaultRecordFolder + the
recording fields (_recordFolder, RecordFolderDisplay, _activeRecordPath,
_recordStartTime, _recordLength).
- MainViewModel.Streaming.Operations.cs 475 -> 377 (keeps live session lifecycle,
health, visuals).
- MainViewModel.Streaming.cs 328 -> 323 (keeps pills/state/properties intact).
Same partial class — all MVVM bound-property glue untouched, no behavior change.
Build 0 warnings; 246 pass, only the 2 known failures.
Docs: ViewModels/index.md tracker updated in same commit.
Streaming.cs 789 -> 330. Moved the go-live/record/health operation bodies into a
new MainViewModel.Streaming.Operations.cs partial (459 lines: StartSession,
BeginRecordOnly, BeginGoLive, StartRecordFile, PrepareAndStartLiveAsync,
PollHealthAsync/OnHealthPollTick/ApplyHealthIssue, StopStream,
FinalizeRecordingAsync, UniquePath, Choose/ResetRecordFolder, DefaultRecordFolder,
OnFramePumpFailed/HealthUpdated, ApplyHealth, ResetHealth, BuildEncoderOptions).
Streaming.cs keeps state, quality/resolution tiers, session timer, command
declarations. Pruned dead usings in both files.
Zero behavior change; build 0 warnings; 246 pass, only the 2 known failures.
Docs: ViewModels/index.md Phase 3 tracker updated in same commit.
MainViewModel.Streaming.cs (787 lines) takes the full go-live/record flow
(StartSession/BeginRecordOnly/BeginGoLive/PrepareAndStartLiveAsync/StopStream,
record-file naming + rename-on-stop), health pipeline (FramePump.Handle +
poll, report-by-exception banner), session timer, REC/ON-AIR start/end UI,
the resolution quality dropdown over the 1920x1080 master, live window
visual tokens (UpdateLiveVisuals), record-folder commands, broadcast
pull-out (CurrentBroadcastId/BroadcastForm) and the stream-state setters
(StreamStatus/StreamVisibility) + their fields. Core drops 1890 -> 1119
lines. Cross-partial references (IsConnected, IsEditMode, BrandFlash*,
_audioMixer, ctor wiring) are safe on one partial class.
Zero behavior change; build 0 warnings; 246 pass, only the 2 known
pre-existing failures (audio-mix gain + round-clip grab). Docs: index.md
Streaming row added + core row trimmed in the same commit.
gramps