Reported as "the default video and the green screen video are playing at a hideously slow
rate… I thought the playback timing issues were resolved?!" They were not: two independent
faults, both in the shared clip pipe.
1. QUADRATIC COPY IN THE FRAME READER. `RawVideoFrameReader` re-concatenated the whole pending
buffer on every `Feed`, and the pipe feeds it 64 KB at a time. A 1080p BGRA frame is 8 MB, so
one frame cost ~127 copies of a growing buffer — roughly half a gigabyte of memcpy per frame.
Measured on a 30 fps clip: 6 frames in 3 seconds (2 fps). The reader now fills one preallocated
frame buffer and hands that array to the VideoFrame, so a frame is copied exactly once. Pipe
reads are 256 KB. Same clip: 29 fps.
2. PACING SLEPT ON TOP OF THE WORK. A fixed 1/fps sleep after each frame adds the frame's own
cost, so 20 ms of work on a 30 fps clip yields 1/(33+20) ≈ 19 fps — measured 20.9. Pacing is
now deadline-based (`Helpers/FramePacer.cs`): wait only what is left of the frame's interval,
resync when a frame overruns instead of bursting, never sleep longer than one interval.
The alert clip shares this pipe, so it gained both fixes.
Tests: `FramePacerTests` (subtract work, no drift, late → resync, zero duration, reset);
`ChromaKeyRealClipTests.RealClip_PlaysAtItsNativeRate` (throughput floor of 15 fps on the real
30 fps clip — the old code sat at 2); the two pacing assertions now check "at most one interval"
rather than an exact sleep, which is what deadline pacing means. Full suite: 574 passed,
0 failed, clean build.
gramps
5577aaaf91
