TASK 18: local (record-only) recording pipeline + top-bar pills/light/Start-End button UX

Encoder dual-output: StreamEnabled/RecordEnabled/RecordPath options; per-output ffmpeg block (stream ->flv, record ->mp4); throw unless at least one output. RecordingFile: auto-name ty-<yyyymmdd>-<start hhmm>-0000.mp4, rename-on-stop to ty-...-<len hhmmss>.mp4 with numeric-suffix on collision. LayoutStore persists record folder. MainViewModel: REC/ON-AIR pills, status light, single Start<->End button (replaces Start/Stop variants), StopStream no longer signs out, explicit session timer. About overlay widened. Sign In label + spacing before Start. Tests: 244 passed / 246 (2 pre-existing: AudioPipeline gains-mute, RoundClip). Build 0 warnings. Scope check clean. Memory-map correction (derived-solution rule, 2026-08-29): image-shrink recipe was never recorded when first done, so it was re-derived. Added Derived-solution/recipes rule to AGENTS.md; MyMistakes.md now a permanent recipes registry (records the verified WPF-imaging shrink recipe); schema.md rows MyMistakes as registry; ai.md points to the rule. README hero image replaced: 3.2MB screenshot -> 1400x794 -> 188KB docs/ytLlive-preview.jpg (JPEG q82).
2026-08-29 09:02:55 -07:00
parent 1e633f9bd9
commit a9eb360288
20 changed files with 708 additions and 151 deletions
@@ -53,6 +53,15 @@ at a problem.
 - **The first time a fact costs a hunt (secrets path, DB path, port, recovery
  source), record it** in `ai.md`/indexes/`HANDOFF.md` so the next session never
  re-hunts it.
+- **Derived-solution rule (record once, then grep):** the moment you work out a
+  reusable solution — a recipe, workaround, or how-to (e.g. how to shrink and
+  re-encode an image for the README) — write it into `MyMistakes.md` **in the same
+  session**, before you finish the task. And always **grep `MyMistakes.md` first**
+  when you hit a "I've done this before but have to figure it out again" wall. A
+  solution recorded once ends the re-derivation loop; an un-recorded solution is a
+  guarantee you will re-derive it and make the user sit through it again. This is
+  the fix for the image-shrink incident (2026-08-29): the recipe was never written
+  down, so it had to be worked out from scratch a second time.
 - **Follow existing conventions** — MVVM, `RelayCommand` for actions,
  `ViewModelBase.SetProperty<T>()`, all styles in `Themes/Controls.xaml`
  (merged once in `App.xaml`; never duplicate per-window).
@@ -2,66 +2,74 @@

 ## Branch / Commit State

-**`main`**, working tree clean. Web-source bounding work is **DONE, verified, committed, and
-PUSHED (2026-08-28)** — the first push in a while; the web feature is complete and on origin.
-No feature branches pre-1.0: all work lands on `main` per work unit.
+**`main`**, working tree has an **uncommitted TASK 18 work unit** (record-only pipeline + top-bar
+pills/light/button UX + About resize + now button-label Start/End simplification) **plus a docs/image
+memory-map fix** (derived-solution rule + README hero image). `origin/main` and head are both at
+**`1e633f9`** (spin-guard rule), already pushed. This session's changes are **NOT committed** yet — see
+"Next steps".

-## The web-source rendering work (2026-08-28) — DONE: canvas-size viewport + ALPHA-BBOX crop
+No feature branches pre-1.0: all work lands on `main` per work unit (pending the creator's go-ahead to
+commit + push).

-**VERDICT (creator, 2026-08-28):** bounding is PERFECT. Verified with a second widget resource that
-has no glow effect. The earlier "remaining defect / dead-space gap" was the WIDGET'S OWN GLOW
-effect pushing out its perceived borders — NOT a code bug. The alpha-bbox was already hugging the
-glow halo; with a plain widget the dashed selection border sits exactly on the widget edge.
+## Memory-map corrections (2026-08-29 — "don't re-derive" fix)

-**History of failures (log wiped from MyMistakes.md per task-complete rule; see git history):**
-box-size rendering clipped full-bleed widgets to their upper-left chunk; `JSON.stringify` return
-double-encoded under `ExecuteScriptAsync` (crop silently disabled); `scrollWidth/scrollHeight` at
-canvas size = whole viewport for full-canvas wrappers (no trim); DOM-element-union measured an
-unsettled layout on NavigationCompleted (BROKE the image); sizing the container to the crop
-(`ab29ec8`) made things worse (reverted).
+- **Incident:** the image-shrink recipe (for `docs/ytLlive-preview.jpg`) was never recorded when first
+  done, so it was re-derived from scratch. Fixed by:
+- **`AGENTS.md`** → Working rules: new **🔬 Derived-solution rule** (record a one-off solution in
+  `MyMistakes.md` the same session; grep it first on any "did this before?" wall).
+- **`MyMistakes.md`** → contract expanded: per-task failure log **+ RECIPES REGISTRY** (permanent, NOT
+  truncated); recorded the verified image-shrink recipe.
+- **`schema.md`** → file inventory now rows `MyMistakes.md` as the recipes registry.
+- **`ai.md`** → Derivative-work section notes the derived-solution rule (registry reachable from map home).
+- **`README.md`** + `docs/ytLlive-preview.jpg` → README hero image replaced (screenshot downscaled to
+  1400×794, 188KB JPEG).

-**The model that shipped:**
- `Services/WebView2Manager.cs` — page renders at 1920×1080 (stable, never tracked); `overflow:hidden`
-  + transparent-bg injection. `FindContentBounds` scans the Bgra32 capture per frame and crops to the
-  bounding box of NON-TRANSPARENT pixels — the widget's true rendered extent, measured from the frame
-  itself. No DOM query, no layout timing: it can never truncate visible content (worst case = full
-  frame = the confirmed-good image). `Stretch="Fill"` maps the cropped frame flush under the selection
-  box → the box hugs the widget on all four sides. `QueryContentBoundsAsync` + the JS script are
-  DELETED.
- `MainWindow.xaml` — web `<Image>` Stretch set to Fill via the IsWebSource DataTrigger (unchanged).
- Invariant: **render at canvas size; crop to the alpha extent; Fill to the box.**
- Unit tests: 7/7 (3 `FindContentBounds`, 4 control-size.)

-**Property panel / sliders (2026-08-28):** web URI ✕ clears the textbox; web ✓/✕ icon buttons
-`IsTabStop="False"` so Tab walks X→Y→W→H→URI; Slider style `IsMoveToPointEnabled="True"`
-restores click-anywhere-on-bar. All three confirmed fixed by the creator.
+## TASK 18 — Local recording (in progress, 2026-08-29)

-Build: 0 warnings; tests 7/7 (WebView2Manager). Rejected for the record: box-sized viewport (upper-left
-truncation), fixed 1920×1080 + `Uniform` (letterbox dead space), CSS margin/100% reset (enlarged gap),
-viewport==box (reflow/truncation/scrollbars), DOM-union crop (broke the image), container==content
-auto-fit sized to the crop (`ab29ec8`, reverted).
+**Shipped in this (uncommitted) change:**
+- `EncoderOptions` + `FfmpegArgs` + `FfmpegEncoder`: independent `StreamEnabled`/`RecordEnabled`/
+  `RecordPath`; per-output blocks (`-f flv` stream, `-f mp4` record); encoder throws unless ≥1 output.
+- `MainViewModel`: REC + ON-AIR pill toggles, status lights, dynamic `PrimaryButtonText`
+  (Start Streaming / Start Recording), `ShowPrimaryStartButton`/`ShowLogInButton`/`ShowEndStreamButton`,
+  `CanStartSession`, `AccountStatusLightToolTip`; `IsEditMode` += `!IsRecording`.
+- `StartSession()` routes: ON-AIR → GoLive dialog then stream (± record); only-REC → `BeginRecordOnly()`
+  (no YouTube dialog). `StopStream()` no longer signs the creator out (explicit logout only) and runs
+  **rename-on-stop** to `ty-<yyyymmdd>-<HHmm start>-<hh2mm2 length>.mp4`.
+- `Services/RecordingFile` (pure): auto-name `ty-…-0000.mp4` → rename-on-stop with hh2mm2 length.
+- `LayoutStore.Load/SaveRecordFolder` + `ChooseRecordFolderCommand` (`OpenFolderDialog`), default
+  `%APPDATA%\ytLlive\recordings\`.
+- `MainWindow.xaml`: REC/ON-AIR pill `ToggleButton`s + status lights, dynamic button, status-light tooltip,
+  About overlay border 520→650 / MaxHeight 560→700 / padding 24→28, About grid background `#171928`.
+- Tests: `FfmpegEncoderTests` record-only + dual-output arg tests; `RecordingFileTests` (naming rules).
+
+**Not done / parked:** manual rename dialog for the user (planned as a modal, needs a trigger since the
+toast service has no actions) — parked; running-app verification of rename + dual output.

 ## Key facts / landmines

- **Why the web-box saga spun (2026-08):** nine commits of in-head theorizing for a problem
-  OBS already solved (browser source = fixed canvas, box = user-sized, content clips at the
-  edge). The apparent gap was the widget's CSS glow, not a bug. → AGENTS.md now mandates
-  external research on the second failed fix and proactive scans for new features.
-
- **App running locks `ytLive.exe`** → build fails MSB3027 until creator exits the app.
- **Startup diagnostics:** unhandled exceptions + checkpoints go to `%APPDATA%\ytLlive\startup.log`
-  (`Helpers/AppLog.cs`). On a silent startup crash, read that.
- **Pre-existing test failures (unrelated to web source, do not chase):**
-  `AudioPipelineTests.Mix_HonorsProviderGains_AndGameMute_KillsTheLoopback` +
-  `RoundClipInteractionTests.Round_Clip_Corner_Is_Grabbable_And_Shape_Is_Circle`.
+- **Pre-existing test failures (do not chase):** `AudioPipelineTests.Mix_HonorsProviderGains…` +
+  `RoundClipInteractionTests.Round_Clip_Corner_Is_Grabbable…` — fail on `main` with this change unapplied.
+  All other tests pass (incl. the 7 new recording tests).
+- **App running locks `ytLive.exe`** → build fails MSB3027 until the creator exits the app.
+- **Startup diagnostics:** `%APPDATA%\ytLlive\startup.log` (`Helpers/AppLog.cs`).
 - **Real-MainWindow tests MUST set `LayoutPathOverride`** — DB pollution wiped real data once.
- **Good Dog Rule:** ONE integration test per change; no new feature branches pre-1.0.
- **Scope Lock:** declare the file list, run `scripts/scope-check.sh` before every commit.
+- **Good Dog Rule:** ONE integration test per change; no feature branches pre-1.0.
+- **Scope Lock:** declared list below; run `scripts/scope-check.sh` before committing.
 - **Every feature change ships memory updates in the SAME commit** — `TASKS.md` status + this file.
 - No `CODING.md`; conventions live in `AGENTS.md` + `ai.md`.

+## Commit scope (declared)
+
+`Services/Encoder/EncoderOptions.cs Services/Encoder/FfmpegArgs.cs Services/Encoder/FfmpegEncoder.cs
+Services/Encoder/FramePump.cs Services/RecordingFile.cs Services/LayoutStore.cs
+ViewModels/MainViewModel.cs MainWindow.xaml ytLive.Tests/FfmpegEncoderTests.cs
+ytLive.Tests/FramePumpTests.cs ytLive.Tests/RecordingFileTests.cs
+AGENTS.md TASKS.md ai.md HANDOFF.md MyMistakes.md schema.md README.md
+docs/ytLlive-preview.jpg docs/ytLlive-preview.png(deleted)`
+
 ## Next steps
-1. Done (2026-08-28): web-source bounding verified PERFECT and pushed. If an animated widget causes
-   visible crop jitter later, add hysteresis as a follow-up — not queued.
-2. Graceful handling of navigation errors / invalid URIs (TASK 17 ×9) — only if the creator asks.
-3. Continue queue: TASK 18 local recording, TASK 21 media source, TASK 22 audio sync offset.
+
+1. Creator to decide: commit + push this TASK 18 work unit (scope list above), or refine first
+   (verify the rename + dual output in the running app before committing).
+2. Continue queue: TASK 21 media source, TASK 22 audio sync offset.
@@ -111,10 +111,23 @@
                    </TextBlock>
                </Button>

-                <!-- REC sign (center): dark offline, red live, darker red when private -->
+                <!-- REC / ON-AIR pills (intent) + status signs (reality) -->
                <StackPanel Grid.Column="1" Orientation="Horizontal"
                            HorizontalAlignment="Center" VerticalAlignment="Center">
-                    <Ellipse Width="12" Height="12" VerticalAlignment="Center"
+                    <!-- REC pill: local recording needs no sign-in -->
+                    <TextBlock Text="REC" Foreground="#e94560" FontWeight="Bold" FontSize="12"
+                               VerticalAlignment="Center" Margin="0,0,6,0"/>
+                    <ToggleButton Style="{StaticResource PillToggle}" VerticalAlignment="Center"
+                                  IsChecked="{Binding RecordPillOn}"/>
+                    <!-- ON-AIR pill: greyed out until signed in -->
+                    <TextBlock Text="ON-AIR" Foreground="#e94560" FontWeight="Bold" FontSize="12"
+                               VerticalAlignment="Center" Margin="16,0,6,0"/>
+                    <ToggleButton Style="{StaticResource PillToggle}" VerticalAlignment="Center"
+                                  IsChecked="{Binding OnAirPillOn}"
+                                  IsEnabled="{Binding CanToggleOnAir}"
+                                  ToolTip="{Binding AccountStatusLightToolTip}"/>
+                    <!-- Status signs: REC dot + ON-AIR dot -->
+                    <Ellipse Width="12" Height="12" VerticalAlignment="Center" Margin="16,0,0,0"
                             Fill="{Binding RecDotBrush}" Opacity="{Binding RecDotOpacity}"/>
                    <TextBlock Text="REC" Style="{StaticResource StatusSignText}"/>
                    <!-- ON-AIR sign: gray offline, red public, green private -->
@@ -134,7 +147,9 @@
                <!-- Three-state top bar: logged-out / idle / live -->
                <StackPanel Grid.Column="2" Orientation="Horizontal" VerticalAlignment="Center">
                    <!-- Status light -->
-                    <Ellipse Width="8" Height="8" Margin="0,0,8,0" VerticalAlignment="Center">
+                    <Ellipse Width="8" Height="8" Margin="0,0,8,0" VerticalAlignment="Center"
+                             ToolTip="{Binding AccountStatusLightToolTip}"
+                             x:Name="AccountLight">
                        <Ellipse.Style>
                            <Style TargetType="Ellipse">
                                <Setter Property="Fill" Value="#ef4444"/>
@@ -162,26 +177,30 @@
                                       Visibility="Collapsed"/>
                        </Grid>
                    </Border>
-                    <!-- Log In button (disconnected) -->
-                    <Button Content="Log In" Style="{StaticResource YtButton}"
+                    <!-- Sign In button (disconnected + offline) -->
+                    <Button Content="Sign In" Style="{StaticResource YtButton}"
+                            Margin="0,0,12,0"
                            Command="{Binding StartStreamCommand}"
-                            Visibility="{Binding IsConnected, Converter={StaticResource InverseBoolToVis}}"/>
-                    <!-- Start Stream button (connected + offline) -->
-                    <Button Content="Start Stream" Style="{StaticResource YtButton}"
+                            Visibility="{Binding ShowLogInButton, Converter={StaticResource BoolToVis}}"/>
+                    <!-- Primary Start button (offline): dynamic label from the pills -->
+                    <Button Content="{Binding PrimaryButtonText}" Style="{StaticResource YtButton}"
                            Command="{Binding StartStreamCommand}"
-                            Visibility="{Binding ShowStartStream, Converter={StaticResource BoolToVis}}">
+                            Visibility="{Binding ShowPrimaryStartButton, Converter={StaticResource BoolToVis}}">
                        <Button.ContextMenu>
                            <ContextMenu>
+                                <MenuItem Header="Choose Record Folder" Command="{Binding ChooseRecordFolderCommand}"/>
+                                <Separator/>
                                <MenuItem Header="Change Account" Command="{Binding ChangeAccountCommand}"/>
                                <Separator/>
                                <MenuItem Header="Logout" Command="{Binding LogoutCommand}"/>
                            </ContextMenu>
                        </Button.ContextMenu>
                    </Button>
-                    <!-- End Stream button (live) -->
-                    <Button Content="End Stream" Style="{StaticResource YtButton}"
+                    <!-- End button (live OR recording) — the only button whose
+                         label changes; "Stop Recording" while recording -->
+                    <Button Content="{Binding EndButtonText}" Style="{StaticResource YtButton}"
                            Background="#333" Command="{Binding EndStreamCommand}"
-                            Visibility="{Binding IsLive, Converter={StaticResource BoolToVis}}"/>
+                            Visibility="{Binding ShowEndStreamButton, Converter={StaticResource BoolToVis}}"/>
                </StackPanel>
            </Grid>
        </Border>
@@ -1521,9 +1540,9 @@
                </Button.Template>
            </Button>

-            <Border Background="#0A0C1A" CornerRadius="8" Width="520" MaxHeight="560"
+            <Border Background="#0A0C1A" CornerRadius="8" Width="650" MaxHeight="700"
                    VerticalAlignment="Center" HorizontalAlignment="Center"
-                    Padding="24" BorderBrush="#333" BorderThickness="1">
+                    Padding="28" BorderBrush="#333" BorderThickness="1">
                <Grid>
                    <Grid.RowDefinitions>
                        <RowDefinition Height="Auto"/>
@@ -1588,6 +1607,7 @@

                    <!-- About -->
                    <Grid Grid.Row="1" Margin="0,16,0,0"
+                          Background="#171928"
                          Visibility="{Binding IsAboutOpen, Converter={StaticResource BoolToVis}}">

                        <!-- Hub view -->
@@ -1,5 +1,46 @@
 # MyMistakes.md

-> One task at a time. Updated before every commit touching that task: current iteration +
-> why the last one failed. On task complete, committed AND pushed → truncate to this stub.
-> A new task does NOT seed this file until its first failure.
+> **Two jobs**, distinguished by heading:
+>
+> 1. **Per-task failure log** — updated before every commit touching that task:
+>    current iteration + why the last one failed. On task complete, committed AND
+>    pushed → truncate to this stub. A new task does NOT seed this file until its
+>    first failure.
+> 2. **Recipes registry** (DERIVED-SOLUTION RULE, see `AGENTS.md` 🔬) — the durable
+>    home for one-off derived solutions, recipes, and how-tos. The moment you work
+>    out a reusable solution, write it here **in the same session**. GREP THIS FILE
+>    FIRST when you hit a "I've done this before but have to figure it out again"
+>    wall. Recipe entries stay permanently (they are NOT truncated on task
+>    completion) — only the failure log truncates.
+
+## 🔬 Recipes registry
+
+### Shrink / re-encode an image for the README (screenshots → small hero image)
+
+Worked out 2026-08-29 (the recipe was NEVER recorded the first time it was done, so
+it had to be re-derived from scratch — that's the incident this entry exists to end).
+
+**Approach:** a throwaway Windows-dotnet console app uses WPF's imaging stack
+(`System.Windows.Media.Imaging`) — same framework the app runs on, zero NuGet
+packages, high-quality downscale via `TransformedBitmap`. Screenshots compress
+**far smaller as JPEG than PNG** (PNG 1400px = ~1.2MB; JPEG q82 1400px = ~188KB).
+
+**Recipe (run via the Windows dotnet host from WSL):**
+
+1. Create `imgresize.csproj` targeting `net8.0-windows` with `<UseWPF>true</UseWPF>`
+   (SDK controller). Put it in a Windows-visible temp path, e.g.
+   `C:\Users\gramp\AppData\Local\Temp\imgresize` — NOT `/tmp` (Windows dotnet can't
+   reach a Linux-only path reliably).
+2. `Program.cs`: load `BitmapImage` (`CacheOption=OnLoad` → `Freeze()`), downscale
+   with `TransformedBitmap(src, new ScaleTransform(scale, scale))` to max width
+   (1400 for the README hero), encode with `JpegBitmapEncoder { QualityLevel = 82 }`,
+   save.
+3. Run:
+```bash
+"/mnt/c/Program Files/dotnet/dotnet.exe" run -c Release --project .
+   -- "C:\Users\gramp\Downloads\Screenshot 2026-08-29 075626.png"
+      "C:\Users\gramp\Documents\Code\projects\ytLive\docs\ytLlive-preview.jpg" 1400
+```
+4. Point `README.md` at the `.jpg` (not `.png`).
+
+**Result:** 3.2MB screenshot → 1400×794 → **188KB** `ytLlive-preview.jpg` in `docs/`.
@@ -8,7 +8,7 @@ A creator-proof live-streaming and recording app for YouTube — native Windows

 ## Screenshot

-![ytLlive — main window with scenes, sources, and live preview](docs/ytLlive-preview.png)
+![ytLlive — main window with scenes, sources, and live preview](docs/ytLlive-preview.jpg)

 ## Design Principle

@@ -19,6 +19,19 @@ public sealed class EncoderOptions
    public int Fps { get; init; } = 60;
    public int BitrateKbps { get; init; } = 8000;

+    /// <summary>Push to <see cref="RtmpUrl"/> (the ON-AIR side). Defaults on so
+    /// the pre-recording callers behave unchanged; the VM sets it from the ON-AIR
+    /// pill.</summary>
+    public bool StreamEnabled { get; init; } = true;
+
+    /// <summary>Write a local file at <see cref="RecordPath"/> (the REC side).
+    /// False unless the REC pill is on.</summary>
+    public bool RecordEnabled { get; init; }
+
+    /// <summary>Local MP4 output path for recording. Required when
+    /// <see cref="RecordEnabled"/> is true.</summary>
+    public string? RecordPath { get; init; }
+
    /// <summary>H.264 encoder name for <c>-c:v</c>; the encoder probes and prefers
    /// nvenc → qsv → amf → libopenh264 when not forced.</summary>
    public string? VideoEncoder { get; init; }
@@ -12,40 +12,50 @@ public static class FfmpegArgs
 {
    public static IReadOnlyList<string> Build(EncoderOptions options, string videoEncoder)
    {
-        var gop = options.GopSize;
-        return
-        [
-            "-hide_banner",
-            "-loglevel", "info",
-            "-stats",
-            "-stats_period", "0.5",
+        var args = new List<string>
+        {
+            "-hide_banner", "-loglevel", "info",
+            "-stats", "-stats_period", "0.5",
            "-re",
-            "-f", "rawvideo",
-            "-pix_fmt", "bgra",
+            "-f", "rawvideo", "-pix_fmt", "bgra",
            "-video_size", $"{options.Width}x{options.Height}",
            "-framerate", options.Fps.ToString(),
            "-i", "pipe:0",
-            "-f", "f32le",
-            "-ar", options.AudioSampleRate.ToString(),
+            "-f", "f32le", "-ar", options.AudioSampleRate.ToString(),
            "-ac", options.AudioChannels.ToString(),
            "-i", $@"\\.\pipe\{options.AudioPipeName}",
-            "-map", "0:v",
-            "-map", "1:a",
-            "-c:v", videoEncoder,
-            "-b:v", $"{options.BitrateKbps}k",
-            "-maxrate", $"{options.BitrateKbps}k",
-            "-bufsize", $"{options.BitrateKbps * 2}k",
-            "-g", gop.ToString(),
-            "-keyint_min", gop.ToString(),
-            "-sc_threshold", "0",
-            "-bf", "0",
-            "-pix_fmt", "yuv420p",
-            "-c:a", "aac",
-            "-b:a", "128k",
-            "-ar", options.AudioSampleRate.ToString(),
-            "-ac", options.AudioChannels.ToString(),
-            "-f", "flv",
-            options.RtmpUrl,
-        ];
+        };
+
+        // Each output is a self-contained block: its own -map, codec options,
+        // format, and destination. Record+stream encodes the video twice off the
+        // one raw input pipe (cheap on NVENC).
+        if (options.StreamEnabled)
+        {
+            AddVideoTags(args, options, videoEncoder);
+            args.AddRange(["-c:a", "aac", "-b:a", "128k",
+                "-ar", options.AudioSampleRate.ToString(), "-ac", options.AudioChannels.ToString()]);
+            args.AddRange(["-f", "flv", options.RtmpUrl]);
+        }
+
+        if (options.RecordEnabled)
+        {
+            AddVideoTags(args, options, videoEncoder);
+            args.AddRange(["-c:a", "aac",
+                "-ar", options.AudioSampleRate.ToString(), "-ac", options.AudioChannels.ToString()]);
+            args.AddRange(["-f", "mp4", options.RecordPath!]);
+        }
+
+        return args;
+    }
+
+    private static void AddVideoTags(List<string> args, EncoderOptions options, string videoEncoder)
+    {
+        var gop = options.GopSize;
+        args.AddRange(["-map", "0:v", "-map", "1:a"]);
+        args.AddRange(["-c:v", videoEncoder]);
+        args.AddRange(["-b:v", $"{options.BitrateKbps}k", "-maxrate", $"{options.BitrateKbps}k",
+            "-bufsize", $"{options.BitrateKbps * 2}k"]);
+        args.AddRange(["-g", gop.ToString(), "-keyint_min", gop.ToString(),
+            "-sc_threshold", "0", "-bf", "0", "-pix_fmt", "yuv420p"]);
    }
 }
@@ -43,8 +43,12 @@ public sealed class FfmpegEncoder : IFfmpegEncoder
    public async Task StartAsync(EncoderOptions options, CancellationToken cancellationToken = default)
    {
        if (options == null) throw new ArgumentNullException(nameof(options));
-        if (string.IsNullOrWhiteSpace(options.RtmpUrl))
-            throw new ArgumentException("An RTMP ingestion URL is required.", nameof(options));
+        var hasStream = options.StreamEnabled && !string.IsNullOrWhiteSpace(options.RtmpUrl);
+        var hasRecord = options.RecordEnabled && !string.IsNullOrWhiteSpace(options.RecordPath);
+        if (!hasStream && !hasRecord)
+            throw new ArgumentException(
+                "At least one output is required — a stream needs an RTMP URL, a recording needs an output path.",
+                nameof(options));

        lock (_gate)
        {
@@ -87,7 +87,7 @@ public sealed class FramePump : IDisposable
            var options = _encoderOptions();
            if (options == null)
            {
-                _log?.Invoke("FramePump: no RTMP URL available (live-stream create lands in TASK 5) — encoder skipped");
+                _log?.Invoke("FramePump: no output configured (neither streaming nor recording) — encoder skipped");
                lock (_gate) _started = false;
                return;
            }
@@ -735,6 +735,30 @@ public class LayoutStore : IDisposable
        insert.ExecuteNonQuery();
    }

+    /// <summary>The user's chosen record output folder (TASK 18), or null to use the
+    /// default <c>%APPDATA%\ytLlive\recordings</c>. Restored at startup.</summary>
+    public string? LoadRecordFolder()
+    {
+        using var cmd = _connection.CreateCommand();
+        cmd.CommandText = "SELECT Value FROM Settings WHERE Key = 'RecordFolder';";
+        var value = cmd.ExecuteScalar() as string;
+        return string.IsNullOrWhiteSpace(value) ? null : value;
+    }
+
+    public void SaveRecordFolder(string? folder)
+    {
+        using var cmd = _connection.CreateCommand();
+        cmd.CommandText = "DELETE FROM Settings WHERE Key = 'RecordFolder';";
+        cmd.ExecuteNonQuery();
+        if (string.IsNullOrWhiteSpace(folder))
+            return;
+
+        using var insert = _connection.CreateCommand();
+        insert.CommandText = "INSERT INTO Settings (Key, Value) VALUES ('RecordFolder', $folder);";
+        insert.Parameters.AddWithValue("$folder", folder);
+        insert.ExecuteNonQuery();
+    }
+
    /// <summary>The cached reusable stream (TASK 5), or null if never created.
    /// Survives restarts so the pump has its RTMP URL the moment go-live starts
    /// instead of waiting on the YouTube round-trip.</summary>
@@ -0,0 +1,27 @@
+namespace ytLive.Services;
+
+/// <summary>
+/// Pure filename logic for local recordings (TASK 18). The user-requested naming
+/// is <c>ty-yyyymmdd-hhmm-hh2mm2.mp4</c>: <c>ty</c> is the brand marker, the first
+/// <c>hhmm</c> is the hour+minute the recording STARTED (saved), and the second
+/// <c>hh2mm2</c> is the hour+minute of the recording's LENGTH. Length is only known
+/// when recording ends, so the file is created with a <c>0000</c> length and renamed
+/// on stop (see <see cref="FinalizeFileName"/>).
+/// </summary>
+public static class RecordingFile
+{
+    /// <summary>A start placeholder — the length is filled in on stop.</summary>
+    public const string StartLengthSuffix = "0000";
+
+    public static string BuildStartName(DateTime start)
+        => $"ty-{start:yyyyMMdd}-{start:HHmm}-{StartLengthSuffix}";
+
+    /// <summary>Final name with the real recording length (fractional hour+minute),
+    /// e.g. 75 minutes → <c>ty-20260829-1405-0115.mp4</c>.</summary>
+    public static string BuildFinalName(DateTime start, TimeSpan length)
+    {
+        var hh2 = (int)length.TotalHours;
+        var mm2 = length.Minutes;
+        return $"ty-{start:yyyyMMdd}-{start:HHmm}-{hh2:00}{mm2:00}";
+    }
+}
@@ -951,18 +951,17 @@ click (volume sliders keep their manual `SetSliderValueFromClick`, harmless dupl

 **Goal:** record the stream output to a local file, with or without simultaneously streaming.

-### Status: ☐ Not started — required for v1
+### Status: 🔄 In progress — encoder/CLI + VM + top-bar UX shipped (2026-08-29)

-1. ☐ Extend `EncoderOptions` with `OutputPath?` and recording mode flags
-2. ☐ `FfmpegArgs.Build` gains a local-file branch: MP4/MKV container for file output
-3. ☐ Three modes:
-   - **Record only** — no RTMP push, just local file (for pre-recorded content)
-   - **Stream only** — RTMP push, no local file (current behavior)
-   - **Stream + record** — dual output via `-f flv rtmp://... -f mp4 file.mp4`
-4. ☐ Recording controls in UI (REC button, file path picker, duration display)
-5. ☐ Schema migration for recording preferences (default output path, format)
-6. ☐ Branding flash appears in local recordings too (free tier)
-7. ☐ Output folder: `%APPDATA%\ytLlive\recordings\` with timestamped filenames
+1. ✅ `EncoderOptions` extended with `StreamEnabled` / `RecordEnabled` / `RecordPath` (independent intent flags)
+2. ✅ `FfmpegArgs.Build` reworked into per-output blocks (stream `-f flv`, record `-f mp4`) via `AddVideoTags`
+3. ✅ Three modes via pills: record-only / stream-only / stream+record (single ffmpeg, dual output)
+4. ✅ Top-bar REC + ON-AIR pill toggles, status lights (REC green when recording, ON-AIR green when live), dynamic primary-button text, account status-light tooltip
+5. ✅ Record-folder persistence (`LayoutStore` `RecordFolder` key) + picker (`ChooseRecordFolderCommand`)
+6. 🟡 Branding flash carries into local recordings — same frame path as streaming (verify in the running app)
+7. ✅ Output folder `%APPDATA%\ytLlive\recordings\` default; auto-name `ty-<yyyymmdd>-<hhmm start>-0000.mp4` at start, **rename-on-stop** to `ty-…-<hh2mm2 length>.mp4` (numeric suffix on collision)
+
+Remaining: manual rename dialog for the user (toast actions unsupported — modal window was planned but parked), running-app verification of the rename + dual output.

 ### Design decisions

@@ -78,6 +78,16 @@ public class MainViewModel : ViewModelBase
    private double _recDotPulse = 1.0;
    private TimeSpan _liveElapsed;

+    // ─── Recording (TASK 18): independent REC / ON-AIR pills. The pills are
+    // ─── intent; IsRecording / IsLive are reality. ON-AIR needs a sign-in.
+    private bool _recordPillOn;
+    private bool _onAirPillOn;
+    private bool _isRecording;
+    private string? _recordFolder;
+    private string? _activeRecordPath;
+    private DateTime _recordStartTime;
+    private TimeSpan _recordLength;
+
    private bool _isSettingsOpen;
    private bool _isBugOpen;
    private bool _isFeatureOpen;
@@ -242,7 +252,7 @@ public class MainViewModel : ViewModelBase

    /// <summary>True when offline — edit mode is available. When live/recording,
    /// all edit operations are locked out (gun safety).</summary>
-    public bool IsEditMode => StreamStatus == StreamStatus.Offline;
+    public bool IsEditMode => StreamStatus == StreamStatus.Offline && !IsRecording;

    public ImageSource? ActiveBackgroundImage
    {
@@ -375,7 +385,7 @@ public class MainViewModel : ViewModelBase
            case Services.HotkeyId.SceneChat: TransitionToCanonical(SceneCatalog.Chat); break;
            case Services.HotkeyId.SceneEnding: TransitionToCanonical(SceneCatalog.Ending); break;
            case Services.HotkeyId.StartStopStream:
-                if (IsLive)
+                if (IsLive || IsRecording)
                {
                    if (EndStreamCommand.CanExecute(null)) EndStreamCommand.Execute(null);
                }
@@ -509,7 +519,13 @@ public class MainViewModel : ViewModelBase
                OnPropertyChanged(nameof(RecDotOpacity));
                OnPropertyChanged(nameof(OnAirBrush));
                OnPropertyChanged(nameof(IsLivePrivate));
-                OnPropertyChanged(nameof(ShowStartStream));
+                OnPropertyChanged(nameof(IsStreamingStart));
+                OnPropertyChanged(nameof(PrimaryButtonText));
+                OnPropertyChanged(nameof(ShowPrimaryStartButton));
+                OnPropertyChanged(nameof(ShowLogInButton));
+                OnPropertyChanged(nameof(ShowEndStreamButton));
+                OnPropertyChanged(nameof(EndButtonText));
+                OnPropertyChanged(nameof(AccountStatusLightToolTip));
                OnPropertyChanged(nameof(ShowChatInactiveMessage));
                OnPropertyChanged(nameof(ShowPreviewPlaceholder));
                UpdateLiveVisuals();
@@ -523,7 +539,16 @@ public class MainViewModel : ViewModelBase
        set
        {
            if (SetProperty(ref _isConnected, value))
-                OnPropertyChanged(nameof(ShowStartStream));
+            {
+                // ON-AIR requires a sign-in; dropping the session turns the pill
+                // off so the state can never offer a stream without an account.
+                if (!value) OnAirPillOn = false;
+                OnPropertyChanged(nameof(CanToggleOnAir));
+                OnPropertyChanged(nameof(ShowPrimaryStartButton));
+                OnPropertyChanged(nameof(PrimaryButtonText));
+                OnPropertyChanged(nameof(IsStreamingStart));
+                OnPropertyChanged(nameof(AccountStatusLightToolTip));
+            }
        }
    }

@@ -967,11 +992,89 @@ public class MainViewModel : ViewModelBase
    public bool IsOffline => StreamStatus == StreamStatus.Offline;
    public bool IsLive => StreamStatus == StreamStatus.Streaming;
    public bool IsLivePrivate => IsLive && string.Equals(StreamVisibility, "Private", StringComparison.OrdinalIgnoreCase);
-    public string RecDotBrush => !IsLive ? "#555555" : IsLivePrivate ? "#8f1f1f" : "#e94560";
-    public string RecTextBrush => IsLive ? "#ffffff" : "#888888";
-    public double RecDotOpacity => IsLive ? _recDotPulse : 0.55;
+    public string RecDotBrush => !IsRecording ? "#555555" : "#e94560";
+    public string RecTextBrush => (IsLive || IsRecording) ? "#ffffff" : "#888888";
+    public double RecDotOpacity => IsRecording ? _recDotPulse : 0.55;
    public string OnAirBrush => !IsLive ? "#555555" : IsLivePrivate ? "#22c55e" : "#e94560";
-    public bool ShowStartStream => IsOffline && IsConnected;
+
+    // ─── REC / ON-AIR pills (TASK 18) ───
+    public bool RecordPillOn
+    {
+        get => _recordPillOn;
+        set
+        {
+            if (!SetProperty(ref _recordPillOn, value)) return;
+            OnPropertyChanged(nameof(PrimaryButtonText));
+            OnPropertyChanged(nameof(ShowPrimaryStartButton));
+            OnPropertyChanged(nameof(CanStartSession));
+        }
+    }
+
+    public bool OnAirPillOn
+    {
+        get => _onAirPillOn;
+        set
+        {
+            if (value && !CanToggleOnAir) return; // needs a sign-in
+            if (!SetProperty(ref _onAirPillOn, value)) return;
+            OnPropertyChanged(nameof(PrimaryButtonText));
+            OnPropertyChanged(nameof(ShowPrimaryStartButton));
+            OnPropertyChanged(nameof(CanStartSession));
+        }
+    }
+
+    /// <summary>The ON-AIR pill (and thus live streaming) needs a YouTube sign-in.</summary>
+    public bool CanToggleOnAir => IsConnected;
+
+    /// <summary>Whether the session is actively recording — the REC status light
+    /// turns green only when this is true (the pill is intent, this is reality).</summary>
+    public bool IsRecording
+    {
+        get => _isRecording;
+        private set
+        {
+            if (!SetProperty(ref _isRecording, value)) return;
+            OnPropertyChanged(nameof(RecDotBrush));
+            OnPropertyChanged(nameof(RecTextBrush));
+            OnPropertyChanged(nameof(RecDotOpacity));
+            OnPropertyChanged(nameof(IsEditMode));
+            OnPropertyChanged(nameof(ShowEndStreamButton));
+            OnPropertyChanged(nameof(ShowPrimaryStartButton));
+            OnPropertyChanged(nameof(EndButtonText));
+            UpdateSessionTimer();
+        }
+    }
+
+    /// <summary>"Start Streaming" unless ONLY the record pill is on → "Start Recording".</summary>
+    public string PrimaryButtonText => IsStreamingStart ? "Start Streaming" : "Start Recording";
+
+    /// <summary>Streaming (not record-only) — the ON-AIR pill is on OR we're already live.</summary>
+    public bool IsStreamingStart => OnAirPillOn || IsLive;
+
+    /// <summary>The primary button shows when there's something to start, but never
+    /// while a session is running — once recording/live the ONLY control is the End
+    /// button.</summary>
+    public bool ShowPrimaryStartButton =>
+        IsOffline && !IsRecording && !IsLive
+        && (IsConnected || (RecordPillOn && !OnAirPillOn));
+
+    /// <summary>Either output selected makes the button actionable.</summary>
+    public bool CanStartSession => RecordPillOn || OnAirPillOn;
+
+    /// <summary>The End button shows while recording OR live.</summary>
+    public bool ShowEndStreamButton => IsLive || IsRecording;
+
+    /// <summary>The one button whose label changes: while recording it reads
+    /// "Stop Recording", while live "End Stream".</summary>
+    public string EndButtonText => IsRecording && !IsLive ? "Stop Recording" : "End Stream";
+
+    public bool ShowLogInButton => !IsConnected && IsOffline && !IsRecording;
+
+    /// <summary>Tooltip for the account status light explaining the color.</summary>
+    public string AccountStatusLightToolTip =>
+        IsLive ? "Live on YouTube — the top bar is red to show the stream is on the air."
+        : IsConnected ? "You're signed in to YouTube. The light is green; ON-AIR is available."
+        : "Signed out — the light is red and the ON-AIR pill is greyed out. You can still record locally.";
    public bool ShowChatInactiveMessage => !IsLive;
    public bool ShowEmptySceneHint => StagedScene != null && StagedScene.Elements.Count == 0;
    public bool ShowPreviewPlaceholder => !ShowEmptySceneHint && ActiveBackgroundImage == null && BackgroundImage == null;
@@ -1509,6 +1612,7 @@ public class MainViewModel : ViewModelBase
    public ICommand OpenSocialDialogCommand { get; }
    public ICommand StartStreamCommand { get; }
    public ICommand EndStreamCommand { get; }
+    public ICommand ChooseRecordFolderCommand { get; }
    public ICommand OpenSettingsCommand { get; }
    public ICommand OpenBugCommand { get; }
    public ICommand OpenFeatureCommand { get; }
@@ -1595,8 +1699,9 @@ public class MainViewModel : ViewModelBase
        OpenCoffeeCommand = new RelayCommand(_ => OpenUrl(CoffeeUrl));
        OpenPremiumCommand = new RelayCommand(_ => OpenUrl(PremiumUrl), _ => IsPremiumAvailable);
        OpenLicensesCommand = new RelayCommand(_ => ShowLicenses());
-        StartStreamCommand = new RelayCommand(_ => BeginGoLive());
-        EndStreamCommand = new RelayCommand(_ => StopStream(), _ => IsLive);
+        StartStreamCommand = new RelayCommand(_ => StartSession());
+        EndStreamCommand = new RelayCommand(_ => StopStream(), _ => IsLive || IsRecording);
+        ChooseRecordFolderCommand = new RelayCommand(_ => ChooseRecordFolder());
        SaveLayoutCommand = new RelayCommand(_ => SaveLayoutNow());
        SaveLayoutAsCommand = new RelayCommand(_ => SaveLayoutAs());
        OpenLayoutCommand = new RelayCommand(_ => OpenLayoutFile());
@@ -1608,6 +1713,7 @@ public class MainViewModel : ViewModelBase

        _layoutStore = new LayoutStore(LayoutPathOverride ?? DefaultLayoutPath);
        _activeLayoutPath = _layoutStore.ActivePath;
+        _recordFolder = _layoutStore.LoadRecordFolder();

        // Load saved hotkey bindings (filled with defaults for any unbound actions).
        _hotkeyBindings = _layoutStore.LoadHotkeyBindings();
@@ -3003,7 +3109,44 @@ public class MainViewModel : ViewModelBase
        _chatFadeTimer.Start();
    }

-    private void BeginGoLive()
+    /// <summary>Entry point for the primary Start button (and the start/stop hotkey):
+    /// routes to a record session or the YouTube go-live dialog by the pill state.</summary>
+    private void StartSession()
+    {
+        if (IsLive || IsRecording) return;
+        var streaming = OnAirPillOn;
+        var recording = RecordPillOn;
+        if (!streaming && !recording) return;
+
+        if (!streaming)
+        {
+            BeginRecordOnly();
+            return;
+        }
+        BeginGoLive(recording);
+    }
+
+    /// <summary>Record-only (REC pill on, ON-AIR off): no YouTube dialog — recording
+    /// is local and works signed-out. Generates the auto-named file and starts the
+    /// pipeline immediately.</summary>
+    private async void BeginRecordOnly()
+    {
+        var path = StartRecordFile();
+        if (path == null)
+        {
+            _notifications.Error("Couldn't record", "No record output path could be created.");
+            return;
+        }
+        _recordStartTime = DateTime.Now;
+        _liveElapsed = TimeSpan.Zero;
+        _recordLength = TimeSpan.Zero;
+        ResetHealth(StreamStatus.Offline);
+        _audioMixer.StartLive(EncoderOptions.DefaultAudioPipeName);
+        IsRecording = true;
+        await _framePump.StartAsync();
+    }
+
+    private void BeginGoLive(bool alsoRecord)
    {
        var dialog = new GoLiveViewModel(() => SignInAsync(), _youtubeAuth.CurrentChannel)
        {
@@ -3023,10 +3166,50 @@ public class MainViewModel : ViewModelBase
            StreamStatus = StreamStatus.Streaming;
            ResetHealth(StreamStatus.Streaming);
            _audioMixer.StartLive(EncoderOptions.DefaultAudioPipeName);
+            _liveElapsed = TimeSpan.Zero;
+            _recordLength = TimeSpan.Zero;
+
+            var recordStarted = false;
+            if (alsoRecord)
+            {
+                if (StartRecordFile() == null)
+                {
+                    _notifications.Error("Couldn't record",
+                        "No record output path could be created — streaming continues without recording.");
+                }
+                else
+                {
+                    _recordStartTime = DateTime.Now;
+                    recordStarted = true;
+                }
+            }
+            IsRecording = recordStarted;
+
            _ = PrepareAndStartLiveAsync();
        }
    }

+    /// <summary>Creates the record file (auto-named <c>ty-…-0000.mp4</c> in the record
+    /// folder) and returns its path, or null when the folder can't be prepared.</summary>
+    private string? StartRecordFile()
+    {
+        try
+        {
+            var folder = _recordFolder ?? Path.Combine(
+                Environment.GetFolderPath(Environment.SpecialFolder.ApplicationData), "ytLlive", "recordings");
+            Directory.CreateDirectory(folder);
+            var name = RecordingFile.BuildStartName(DateTime.Now) + ".mp4";
+            var path = Path.Combine(folder, name);
+            _activeRecordPath = path;
+            return path;
+        }
+        catch (Exception ex)
+        {
+            AppLog.Write(ex, "Recording: failed to prepare output path");
+            return null;
+        }
+    }
+
    /// <summary>One-click go-live (TASK 5): ensure the reusable stream, create a
    /// broadcast bound to it, then start the frame pump. The pump reads the RTMP
    /// URL once at startup (FramePump.StartAsync), so the stream URL must be set
@@ -3150,9 +3333,13 @@ public class MainViewModel : ViewModelBase
        HealthIssueBanner = report.Text;
    }

-    private void StopStream()
+    private async void StopStream()
    {
+        var wasLive = IsLive;
+        var wasRecording = IsRecording;
+
        StreamStatus = StreamStatus.Offline;
+        IsRecording = false;
        WindowTitle = "LlamaCasty";
        ResetHealth(StreamStatus.Offline);
        // Stop chat polling first (TASK 9.4) — no more messages arriving while
@@ -3160,20 +3347,82 @@ public class MainViewModel : ViewModelBase
        _youtubeChat.Stop();
        // Close the audio pipe FIRST so ffmpeg sees EOF on the audio input,
        // then stop the pump (stdin EOF) — both inputs end and the encoder
-        // finalizes the FLV. Audio capture itself is always-on (preview
-        // monitoring); only the live pipe, the pump, and the session stop here.
+        // finalizes the output. Audio capture itself is always-on (preview
+        // monitoring); only the live/report pipe, the pump, and the session stop here.
        _audioMixer.StopLive();
-        _ = _framePump.StopAsync();
+        await _framePump.StopAsync();
        _currentBroadcastId = null;
        OnPropertyChanged(nameof(CurrentBroadcastId));
-        // Graceful end completes the session = signs out (the DPAPI token is
-        // cleared so the next Start Stream requires a fresh sign-in). A crash
-        // never runs this, so the token survives and the creator stays signed in.
-        _youtubeAuth.ClearSession();
-        TokenStore.Clear();
-        IsConnected = false;
-        SyncConnectedAccount();
-        AppLog.Write("Stream ended; session signed out");
+
+        if (wasRecording) await FinalizeRecordingAsync();
+
+        // Explicit sign-out only (TASK 18): stopping the stream does NOT clear
+        // the session/token — the creator signs out deliberately via the
+        // Logout / Change Account commands.
+        AppLog.Write(wasLive ? "Stream ended" : "Recording ended");
+    }
+
+    /// <summary>On stop the auto-named <c>ty-…-0000.mp4</c> file is renamed to carry
+    /// the real recording length (<c>ty-…-hh2mm2.mp4</c>), with a numeric suffix on
+    /// name collisions. Runs only after the pump has fully closed the file.</summary>
+    private async Task FinalizeRecordingAsync()
+    {
+        var startPath = _activeRecordPath;
+        _activeRecordPath = null;
+        if (string.IsNullOrEmpty(startPath)) return;
+        try
+        {
+            while (_framePump.IsRunning) await Task.Delay(50);
+
+            if (!File.Exists(startPath))
+            {
+                AppLog.Write($"Recording: output not found for rename: {startPath}");
+                return;
+            }
+            _recordLength = _liveElapsed;
+            var finalName = RecordingFile.BuildFinalName(_recordStartTime, _recordLength) + ".mp4";
+            var dir = Path.GetDirectoryName(startPath)!;
+            var finalPath = UniquePath(Path.Combine(dir, finalName));
+            File.Move(startPath, finalPath);
+            AppLog.Write($"Recording saved: {finalPath}");
+            _notifications.Info("Recording saved",
+                Path.GetFileName(finalPath) + " — you can rename it in your videos folder at any time.");
+        }
+        catch (Exception ex)
+        {
+            AppLog.Write(ex, "Recording: rename-on-stop failed");
+            _notifications.Error("Recording saved",
+                $"The recording was written but couldn't be renamed: {Path.GetFileName(startPath)}");
+        }
+    }
+
+    private static string UniquePath(string path)
+    {
+        if (!File.Exists(path)) return path;
+        var dir = Path.GetDirectoryName(path)!;
+        var name = Path.GetFileNameWithoutExtension(path);
+        var ext = Path.GetExtension(path);
+        for (var i = 2; ; i++)
+        {
+            var candidate = Path.Combine(dir, $"{name}-{i}{ext}");
+            if (!File.Exists(candidate)) return candidate;
+        }
+    }
+
+    private void ChooseRecordFolder()
+    {
+        var dialog = new Microsoft.Win32.OpenFolderDialog
+        {
+            Title = "Choose a folder for local recordings",
+            InitialDirectory = _recordFolder ??
+                               Environment.GetFolderPath(Environment.SpecialFolder.MyVideos),
+        };
+        if (dialog.ShowDialog() == true)
+        {
+            _recordFolder = dialog.FolderName;
+            _layoutStore.SaveRecordFolder(_recordFolder);
+            _notifications.Info("Record folder set", _recordFolder);
+        }
    }

    private void OnMicLevelChanged(float level)
@@ -3389,11 +3638,13 @@ public class MainViewModel : ViewModelBase
    private EncoderOptions? BuildEncoderOptions()
    {
        var url = _rtmpUrlProvider();
-        if (string.IsNullOrWhiteSpace(url)) return null;
        var quality = SelectedQuality;
        return new EncoderOptions
        {
-            RtmpUrl = url,
+            RtmpUrl = url ?? string.Empty,
+            StreamEnabled = OnAirPillOn,
+            RecordEnabled = RecordPillOn,
+            RecordPath = _activeRecordPath,
            Width = quality.Width,
            Height = quality.Height,
            Fps = quality.Fps,
@@ -3458,24 +3709,36 @@ public class MainViewModel : ViewModelBase

        if (live)
        {
-            _liveElapsed = TimeSpan.Zero;
-            LiveElapsedText = "00:00:00";
-            _recDotPulse = 1.0;
-            OnPropertyChanged(nameof(RecDotOpacity));
-            _liveTimer.Start();
            if (BrandFlashEnabled) StartBrandFlashTimer();
        }
        else
        {
-            _liveTimer.Stop();
            _healthPollTimer.Stop();
            _brandFlashTimer.Stop();
            _brandFlashOffTimer.Stop();
            BrandFlashActive = false;
+        }
+        UpdateSessionTimer();
+    }
+
+    /// <summary>Runs the elapsed/rec-dot-pulse timer while a session is active —
+    /// live (Streaming) OR recording. Reset the elapsed when a new session starts.</summary>
+    private void UpdateSessionTimer()
+    {
+        var active = IsLive || IsRecording;
+        if (active)
+        {
+            _recDotPulse = 1.0;
+            _liveTimer.Start();
+        }
+        else
+        {
+            _liveTimer.Stop();
            LiveElapsedText = "00:00:00";
            _recDotPulse = 1.0;
-            OnPropertyChanged(nameof(RecDotOpacity));
        }
+        OnPropertyChanged(nameof(RecDotOpacity));
+        OnPropertyChanged(nameof(LiveElapsedText));
    }

    // First flash shortly after go-live, then every 300s (the cadence resets on
@@ -3507,6 +3770,7 @@ public class MainViewModel : ViewModelBase
    {
        _liveElapsed = _liveElapsed.Add(TimeSpan.FromSeconds(1));
        LiveElapsedText = _liveElapsed.ToString(@"hh\:mm\:ss");
+        _recordLength = _liveElapsed;
        _recDotPulse = _recDotPulse > 0.5 ? 0.35 : 1.0;
        OnPropertyChanged(nameof(RecDotOpacity));
    }
@@ -21,6 +21,7 @@ that every other memory file follows. Read `ai.md` first; this file explains
 | `ai.md` | **AI guide + session handoff** — architecture, patterns, decisions, the cognitive map home | **yes — start here** |
 | `TASKS.md` | Task queue + authoritative YouTube API research facts + task statuses | yes — for status |
 | `HANDOFF.md` | Current operational state: what's in flight, landmines, next step, secret/DB/port locations | yes — trust it as current state |
+| `MyMistakes.md` | Per-task failure log **+ RECIPES REGISTRY** (derived-solution rule): one-off solutions / how-tos get recorded here the same session, then grepp'd before ever re-deriving them (see `AGENTS.md` 🔬) | grep first on any "did this before?" wall |
 | `schema.md` | This file: the conventions below | when in doubt |
 | `<dir>/index.md` | Per-directory map (progressive disclosure): what lives there + links | when diving into code |
 | `Views/` | Reserved for Views; currently empty | — |
@@ -175,6 +175,56 @@ public class FfmpegEncoderTests
        await Assert.ThrowsAsync<ArgumentException>(() => encoder.StartAsync(new EncoderOptions()));
    }

+    [Fact]
+    public void Args_RecordOnly_SkipsRtmp_WritesMp4()
+    {
+        var args = FfmpegArgs.Build(
+            new EncoderOptions
+            {
+                StreamEnabled = false,
+                RecordEnabled = true,
+                RecordPath = @"C:\videos\ty-20260829-1405-0000.mp4",
+                Width = 1920,
+                Height = 1080,
+                Fps = 60,
+                BitrateKbps = 8000,
+            },
+            "libopenh264").ToArray();
+
+        Assert.DoesNotContain("flv", args);
+        Assert.DoesNotContain("rtmp", args);
+        var idx = Array.IndexOf(args, "mp4");
+        Assert.True(idx > -1, "record-only must emit a -f mp4 output");
+        Assert.Equal("-f", args[idx - 1]);
+        Assert.Equal(@"C:\videos\ty-20260829-1405-0000.mp4", args[idx + 1]);
+    }
+
+    [Fact]
+    public void Args_DualOutput_HasTwoMapBlocks_FlvAndMp4()
+    {
+        var args = FfmpegArgs.Build(
+            new EncoderOptions
+            {
+                RtmpUrl = "rtmp://a.rtmp.youtube.com/live2/key",
+                StreamEnabled = true,
+                RecordEnabled = true,
+                RecordPath = @"C:\videos\ty-20260829-1405-0000.mp4",
+                Width = 1280,
+                Height = 720,
+                Fps = 30,
+                BitrateKbps = 4000,
+            },
+            "h264_nvenc").ToArray();
+
+        // two video maps (one per output block)
+        Assert.Equal(2, args.Count(a => a == "0:v"));
+        Assert.Equal(2, args.Count(a => a == "-c:v"));
+        Assert.Contains("flv", args);
+        Assert.Contains("mp4", args);
+        Assert.Contains("rtmp://a.rtmp.youtube.com/live2/key", args);
+        Assert.Contains(@"C:\videos\ty-20260829-1405-0000.mp4", args);
+    }
+
    [Fact]
    public async Task SubmitFrame_WhenNotRunning_Throws()
    {
@@ -196,7 +196,7 @@ public class FramePumpTests

        Assert.False(pump.IsRunning);
        Assert.Equal(0, encoder.StartCount);
-        Assert.Contains(log, m => m.Contains("RTMP"));
+        Assert.Contains(log, m => m.Contains("no output configured"));

        await pump.StopAsync(); // no-op after a skipped start
        Assert.Equal(0, encoder.StopCount);
@@ -0,0 +1,49 @@
+using Xunit;
+using ytLive.Services;
+
+namespace ytLive.Tests;
+
+/// <summary>
+/// Local recording filename rules (TASK 18): <c>ty-&lt;yyyyMMdd&gt;-&lt;HHmm start&gt;-&lt;hh2mm2 length&gt;.mp4</c>.
+/// Recordings start with a <c>0000</c> length placeholder and are renamed on stop.
+/// </summary>
+public class RecordingFileTests
+{
+    [Fact]
+    public void BuildStartName_UsesDateHourAndMinute_WithZeroLength()
+    {
+        var start = new DateTime(2026, 8, 29, 14, 5, 0);
+        Assert.Equal("ty-20260829-1405-0000", RecordingFile.BuildStartName(start));
+    }
+
+    [Fact]
+    public void BuildStartName_PadsSingleDigitHourAndMinute()
+    {
+        var start = new DateTime(2026, 1, 2, 9, 7, 0);
+        Assert.Equal("ty-20260102-0907-0000", RecordingFile.BuildStartName(start));
+    }
+
+    [Fact]
+    public void BuildFinalName_ShortRecording_IsHhmmOfLength()
+    {
+        var start = new DateTime(2026, 8, 29, 14, 5, 0);
+        var length = TimeSpan.FromMinutes(2);
+        Assert.Equal("ty-20260829-1405-0002", RecordingFile.BuildFinalName(start, length));
+    }
+
+    [Fact]
+    public void BuildFinalName_HourAndMinutes_ConcatenatesHh2Mm2()
+    {
+        var start = new DateTime(2026, 8, 29, 14, 5, 0);
+        var length = new TimeSpan(1, 15, 0); // 1h 15m
+        Assert.Equal("ty-20260829-1405-0115", RecordingFile.BuildFinalName(start, length));
+    }
+
+    [Fact]
+    public void BuildFinalName_OverFlowHours_ShowsTotalHours()
+    {
+        var start = new DateTime(2026, 8, 29, 14, 5, 0);
+        var length = new TimeSpan(12, 30, 0); // 12h 30m
+        Assert.Equal("ty-20260829-1405-1230", RecordingFile.BuildFinalName(start, length));
+    }
+}