Last slice. 590 green, 0 warnings.
- **Shed before you charge the viewer.** On machine evidence the policy's first act is
`ShedCaptureCadence`: `ScreenCaptureFrameSource` widens its conversion interval 10 ms → 33 ms (≈100
→ 30 conversions/s) through a new `ScreenCaptureManager.ShedLoad`. The output tier, the declared fps
and the viewer's picture are untouched — we stop paying for readbacks we were throwing away. It
costs no step budget; if the starvation persists, the fps ladder runs on the next clean window.
- The shed is reset on every stop path, so a cheap session cannot leave a later one capped.
- **The session line is a Logs-tab line, not a session-report line.** The session report is the money
summary (Super Chats, per currency); quality chatter there would bury the numbers it exists for. The
cause-tagged line already lands in the log at the moment of the step.
TASK 33 is complete: two ladders, budgets, floors, ambiguity, one-way with recovery behind a flag, the
relaunch, the copy, and the cost shed. 18 tests pin the ladders, the copy and the restart.
Pure policy, no wiring yet. 12 unit tests, 584 green overall, 0 warnings.
- **Machine starvation** buys less work: 60 → 30 fps first, then 1080 → 720. The vertical tier has no
resolution step — its floor *is* its only geometry.
- **Upload congestion** buys fewer bits: `current − max(0.5, current × lossFraction)`, floored at
3.0 Mbps (16:9) / 4.0 (vertical). Resolution is deliberately not a bandwidth lever: 1080p30 and
720p60 cost the same, so dropping pixels at an unchanged bitrate relieves nothing.
- **Budgets** as ruled: three steps for a 1920-wide start, one for 720 and vertical. 15 s of evidence,
30 s cooldown, ambiguous evidence does nothing at all.
- **Recovery** is `allowClimb`, default off (the one-way ruling): the machine carries its ceiling from
construction, climbs one step after 180 s of clean windows, and a climb followed by a relapse inside
120 s freezes the session at the low value — one flap pair is proof enough.
Inputs are the poster's own counters (`PumpStalls`, `PumpDrops`, `AvgRenderMs`, `EncoderDrops`), not a
throughput reading: `StreamHealth.CurrentBitrate` is ffmpeg's *encoded output* rate and sits at target
even while the socket is gagging, so it cannot size a step.
gramps