Unit 9, the one that matters most for this creator.
MASTER STRIP (top, nearest the preview):
- one ladder fed by the MEASURED mix — `AudioMixer` now measures the buffer the encoder receives
(`MasterLevel`, `MasterImbalanceDb`), so the master cannot show a source instead of the output
- `-12.4 dB` readout, and ONE L/R flag that appears above a 6 dB gap instead of a second ladder
- bitrate / FPS / dropped / duration from the existing health poll
MONO OUTPUT:
- `AudioFold.ToMono` averages each stereo pair into both channels, applied after the limiter and
the sync delay, so the stream AND the recording get what was folded
- `MonoOutput` is persisted (`Audio.MonoOutput`) and restored at startup: an accessibility switch
that resets each session is an accessibility failure
- one click in the strip, remembered forever
Guard: AudioFoldTests (hard-left reaches the right at half amplitude, hard-right — the inaudible
case — reaches the left, centred material keeps its level, mono buffers untouched) and
MasterStripTests (the strip binds the measured mix + the switch, the store round-trips it, and the
fold is the tested helper rather than new arithmetic). 33 audio tests green.
Unit 8. Re-houses the shipped TASK 22 offset in the dock:
- slider −200…+200 ms, snapping to 5 ms ticks (the existing property still clamps and persists)
- readable readout: "0 ms (aligned)" when right, signed otherwise ("+50 ms", "−120 ms")
- presets 0 / +50 / +100; 0 IS the detent — a button is easier to hit than a snap, and "the lip-sync
is right" deserves one click.
Guard: SyncBayTests pins the binding, the readout, the presets and the snapping, and that the
offset stays the persisted property (no second source of truth).
Unit 6. Mirrors the mic bay for the desktop/game bed, plus the badge that matters to a creator who
cannot hear the duck: it shows while the ducker is actually attenuating, and it prints the gain the
mixer applied (−12.0 DUCK by design).
- `AudioMixer.DuckGain` exposes `AutoDucker.CurrentGain` instead of leaving it internal.
- VM: `GameVolumeDb` / `GameVolumeDbLabel` (fader face), `GameMeterFraction` (measured level),
`IsGameDucking` + `GameDuckLabel` refreshed on the level tick — the same moment the ducker runs,
so the badge cannot lag behind the mix.
- The bay: header chip + source, ladder, mute dot (uses the meter band, so mute reads at a glance),
dB readout, fader.
Guard: GameBayTests — the dock binds all four, `AutoDucker.DuckGain` is −12.04 dB and the label is
produced through the same dB scale as the faders, and the mixer property exists so the badge cannot
become a hardcoded number.
Unit 5. The dock's first working bay:
- 24-segment ladder fed by `MicMeterFraction` — the MEASURED display level (already scaled by the
volume and zeroed when muted), never the gain setting.
- Fader in dB via `MicVolumeDb` (−60 … +6, 0 = unity) with a mono-weight readout
(`MicVolumeDbLabel`), so "−6.0 dB" is what the creator reads instead of "0.50".
- Mute button whose dot uses the existing MicStatusBrush; clicking the device name opens the mic
picker, so the label stays the control (the KISS rule: one place to change the mic).
The preview's own mic row stays for now — it is removed in the final unit, after the dock bays are
complete, so nothing is lost if a bay misbehaves.
Guard: MicBayTests — the bay binds the dB face and the measured level (not the gain), the fader
range IS the scale's range, the VM surface exists, and mute still zeroes the ladder.
The state colours the view-models hand to bindings — top bar, REC/ON-AIR dots, health banner,
meter bands, toast tints — were hex literals in C#. They now resolve from Themes/Tokens.xaml
through `Helpers/ThemeBrush`, so the values live in one place. Without an Application (unit tests)
the helper returns a neutral grey: visibly wrong rather than silently plausible.
Four tokens the code needed and the document lacked, added to DESIGN.md (so the doc-is-the-contract
guard demanded their brushes): info-container #3a3b52, success-container #1d5c38,
warning-container #b8860b, test-container #9c6f1c (the test-stream gold bar).
Also fixed by this: the top bar still painted the RETIRED brand red #e94560 when live — the
standard's #ff5451 now, and `OnAirSignTests` (which pinned the old value) says so. BarOn/BarOff
became properties rather than static fields, because a static field would resolve tokens before
the Application exists.
Verified: DesignTokensTests, GameMeterHonestyTests, NotificationAreaIntegrationTests,
OnAirSignTests, SessionTeardownTests — 38 tests green.
Last inconsistency from the sweep: several VM-side state colours are still literals, and after
the palette moved they disagreed with everything around them — the top bar's LIVE state would
have painted the retired pink-red while the tile beside it used the standard red.
Values aligned (tokenisation of these sites is its own unit — they are strings bound to
Background/Foreground, so the fix is a VM->Brush refactor, not a find/replace):
- live / on-air / recorder dot: #e94560 -> #ff5451 (the standard red)
- error banner: #8f1f1f -> #93000a (error-container)
- audio meter bands follow the doc's stated thresholds: nominal cyan #38bdf8, caution amber
#ffb95f, peak #ff5451 — they were green/yellow/red, which contradicted DESIGN.md's own table
GameMeterHonestyTests pinned the old band colours; its intent (the meter scales by volume) is
unchanged, so the two colour expectations now name the new bands.
Positive offsets still delay the whole mix via the delay line (lip-sync fix);
negative offsets now ARM once at StartLive and drop |N| ms off the pipe's write
head so audio events land earlier when audio runs BEHIND video. Slider relabeled
AUDIO SYNC, Min −500, locked while live/recording (IsEditMode). LayoutStore and
VM clamp to −500..500.
OBS reference for eat-the-head negative sync: https://obsproject.com/kb/obs-studio/buffering-time (negative sync values pull audio earlier by discarding buffered player audio).
Test: StartLive_NegativeOffset_AdvancesAudio_ByDroppingTheStreamHead (6x0.9 head
must be eaten before 0.2 bed reaches the wire).
Creator report 2026-09-01: with the desktop slider dragged to 20%, the game bar's
meter stayed pegged yellow/red. Root cause: the mic meter's formula (level x volume)
was cloned to the game bar WITHOUT the x-volume factor, and the clone inherited a
false premise — that WASAPI loopback capture tracks the endpoint volume. Tonight's
observation disproves it (the tap is pre-endpoint-volume), so both the meter (display)
and the mix (AudioGainProvider.LoopbackGain, fixed in 5ead064) must scale it themselves.
ai.md's two 'loopback scales with the slider' sentences corrected in the same pass.
Test seam: VolumePushOverride (internal static, mirrors LayoutPathOverride pattern) so
the test never hijacks the machine's real volume. GameMeterHonestyTests (RealApp +
temp DB): unity -> hot/red, 20% -> ~1/5 width/green, push observed.
gramps