gramps
6be062c45f
The vertical tier is a centred band crop of the SAME 1920x1080 master (band x
656.25, w 607.5, h 1080), so the 16:9 camera placement (x~1408) falls outside the
cropped window and the creator is simply not in the vertical stream. Each scene
now keeps its own vertical position, size and shape; switching back to 16:9
restores the desktop layout exactly (the creator's locked table, 2026-10-17).
Geometry only - NO render-path change. The preview and the compositor both read
the element's own X/Y/W/H + ClipShape, so the tier switch swaps the LIVE geometry:
- Models/VerticalCameraLayout.cs (new): the pure math - the band, its two 607x540
areas, the six spots (top/bottom x left/centre/right), the 32px inset and the
270x152 default tile (480x270 in the 1080x1920 output) in the bottom-right spot,
the corner the 16:9 default webcam uses.
- Models/WebcamSceneConfig.cs: the vertical placement lives in seven additive
columns (VerticalX/Y/Width/Height/ClipShape/RectWidth/RectHeight; NULL = "this
scene has no vertical placement yet"). The 16:9 layout stays in the old columns
and is parked in the transient Landscape* fields while the vertical tier is
live; Begin/EndVerticalLayout + CommitLiveLayoutToVertical do the swap. The
X/Y/W/H overrides clamp every write into the band - outside it the camera is
invisible in the vertical output.
- Models/SceneElement.cs: X/Y/Width/Height became virtual so the derived element
constrains every writer (drag, resize handle, typed fields) in ONE choke point
instead of three writers each re-implementing the rule.
- ViewModels/MainViewModel.Webcam.cs + .Streaming.cs: IsVerticalTier/VerticalBand,
ResolveVerticalCameraLayout(s) (the tier swap), MoveWebcamInVerticalTier /
SnapWebcamInVerticalTier (the six-spot snap, by the tile's centre),
EnsureVerticalCameraLayout; ApplyStreamQuality is the tier-change hook. The
Live scene gets its small tile automatically on the first vertical switch (the
vertical stream would otherwise have no camera at all); the other scenes keep
their 16:9 placement until the creator drags them into the band.
- Controls/PreviewPane.xaml.cs: the drag/resize route through the VM snap under
the vertical tier instead of free-floating over the master.
Controls/LeftPanel.xaml: the webcam properties gained a Geometry section
(X/Y/W/H) for the manual entry the creator asked for, bound to the LIVE
placement, gated on the VM's IsWebcamSelected (NOT SelectedElement.IsWebcam -
the TASK 51 test finds that panel by binding text and would match twice).
- The store: seven guarded ADD COLUMNs, the INSERT/SELECT extended, and the
X/Y/W/H/ClipShape columns stay the 16:9 layout - while the vertical tier is
live the save writes the parked values there and the live ones into Vertical*.
Test: ytLive.Tests/VerticalWebcamLayoutTests.cs - the ONE Good Dog test. The
vertical tier brings the Live camera INTO the band as a small tile; dragging it to
the top-right lands it top-right inside the band; back to 16:9 the desktop layout
is restored exactly (1408/778/480x270); both placements survive a save + reload.
Full suite 429/429, 0 warnings. LayerReorderPersistenceTests.RealMouseDrag fails
ALONE on a clean tree in this environment - pre-existing flake, proven by stashing
this work, not a regression.
Derivative work: OBS has no built-in per-aspect-ratio layout storage - the
maintainers' answer is "create a second scene and add the scene you want to send
as source" (obsproject.com/forum/threads/161307) - and Streamyard's dual-aspect
guide says the same ("no built-in way to store separate layouts per aspect ratio",
so you rely on manual workarounds and plugins):
https://streamyard.com/blog/dual-aspect-ratio-streaming-tool
Our per-scene, per-tier stored placement, resolved on the tier change, is the
step past both.
Memory in the same commit: ai.md (new section), TASKS.md + TASKS/task-57-*.md
(Unit 1 shipped, Unit 2 = the Chat scene still open), HANDOFF.md, MyMistakes.md
(the per-tier geometry-swap recipe, the binding-text panel trap, the store's
webcam-identity rule) and the Models/Services/ViewModels/Controls index rows.
25 lines
6.3 KiB
Markdown
25 lines
6.3 KiB
Markdown
# Models — index
|
||
|
||
Plain data types. No logic beyond what a property can carry. See
|
||
[`schema.md`](../schema.md) for the memory-map conventions.
|
||
|
||
| File | Purpose |
|
||
|------|---------|
|
||
| `Scene.cs` | A scene: `Name`, `IsHidden`, `IsChatScene`, `IsEditing`, **`HasBackdrop`** (Live-only policy flag, default off — only the canonical Live scene has one, see `SceneCatalog`), `Elements` collection (images + webcam config), `WebcamConfig` accessor |
|
||
| `SceneCatalog.cs` | The five canonical scenes (Starting/Live/BRB/Chat/Ending) — the product, by name: `All`, `IsCanonical`, `Is(name, canonical)` (case-insensitive trim), `IsChat`, `HasBackdrop(name)` (true only for Live). Drives the empty-DB seed, the "+" missing-scenes menu, and `MainViewModel.EnforceBackdropPolicy` |
|
||
| `Source.cs` | A source: `SourceType` enum (DisplayCapture/WindowCapture/Background/Image/TextOverlay/ChatBox/Countdown/WebSource/MediaSource/**AlertBox (TASK 43 — the celebration zone, one per layout)** — **Webcam removed**), `X`/`Y`/`Width`/`Height`, `Opacity`, `IsEnabled`, `ImageSource` (static) / `VideoImageSource` (live frames), `DisplaySource` (`IsLiveCapture` → video, else static), `ClipShape` enum (Traditional/Round), `IsMirrored` + `MirrorScale`, `MirrorButtonText`/`ShapeButtonText`, asset identity, `IsImageSource` (XAML binds this, never `Type`), **backdrop surface**: `IsBackdrop` (permanent bottom layer, never removable), `CaptureKey` (persisted `monitor:<n>`/`window:<hwnd>`/`picker:<name>`), `IsLiveCapture` (`Type` is Display/WindowCapture) |
|
||
| `SceneElement.cs` | Base for anything placeable in a scene: shared layout/clip/mirror/border surface, `virtual IsWebcam`/`virtual IsImageSource`/`virtual IsZoomLayer` (TASK 52); `ToggleClipShape` + persisted `RectWidth`/`RectHeight` (pre-Round rect so round→rect restores after reload); **TASK 57:** the geometry setters (`X`/`Y`/`Width`/`Height`) are `virtual` so a derived element can CONSTRAIN every write (the webcam clamps itself into the vertical tier's band) instead of every writer re-implementing the rule |
|
||
| `VerticalCameraLayout.cs` | **TASK 57 (the "vv" feature):** the vertical (9:16) tier's camera rules as pure math — `TileWidth`/`TileHeight` (270×152 master px = 480×270 in the 1080×1920 output), `Inset` (32 master px from the band's outer edge), `IsVerticalTier(QualityOption)` (portrait tier), `AreaFor(band, bottom)` (the band splits into two 607×540 areas), `MaxSizeFor(band)`, `SpotFor(band, w, h, centreX, centreY)` (the six spots — the area and column the tile's **centre** falls in, inset, never outside the band) and `DefaultSpot` (bottom-right, the corner the 16:9 default webcam uses) |
|
||
| `ZoomSceneElement.cs` | **Transient zoom box (TASK 52, creator-corrected 2026-10-08):** carries the box rect AND the anchored `CaptureX`/`CaptureY` (the fixed box/2 capture window set on `ActivateZoom`; moving the box never touches it). `IsZoomActive` flips `Kind` Static→Dynamic (leaves the baked base while active); never persisted (LayoutStore save skips non-Source/non-WebcamSceneConfig rows), never shown in the layers list or the element template (`IsZoomLayer` gates both). The compositor SKIPS the active element in every layer loop and draws its 2x content LAST (layer n+1) via `ZoomMagnifier`. |
|
||
| `Webcam.cs` | Singleton webcam identity: `Id`, `DeviceId`, `Name` (one row app-wide) |
|
||
| `BackgroundEffect.cs` | **TASK 51:** per-webcam background effect enum `None` / `Remove` / `Blur`, carried by `WebcamSceneConfig` |
|
||
| `WebcamSceneConfig.cs` | Per-scene webcam placement (subclass of `SceneElement`): geometry + `IsVisible` + border (`BorderColor`/`BorderOpacity`/`BorderWidth`/`BorderAnimation`) + `VideoImageSource`; `WebcamId` links to `Webcam`; **TASK 51:** `BackgroundEffect` + `BackgroundStrength` (0..1, default 0.5) + the radio-pill surface `RemoveBackground`/`BlurBackground` (one on turns the other off; both off = None) + `HasBackgroundEffect` (shows the strength slider); **TASK 57 (the "vv" feature):** the vertical (9:16) tier's OWN placement per scene — `VerticalX/Y/Width/Height/VerticalClipShape/VerticalRectWidth/VerticalRectHeight` (persisted, NULL = no vertical placement yet) + the transient `VerticalBand`/`VerticalLayoutLive`/`LandscapeX…LandscapeRectHeight` (the parked 16:9 layout) + `BeginVerticalLayout`/`EndVerticalLayout`/`CommitLiveLayoutToVertical` (the tier swap) and the `X`/`Y`/`Width`/`Height` overrides that clamp every write into the band |
|
||
| `QualityOption.cs` | Resolution tier record `(Display, Fps, Bitrate, Width, Height)`; `Label` formats as `1080p60 (8Mbps)` — drives the bottom-bar dropdown and the output-rect math |
|
||
| `StreamConfig.cs` | `StreamConfig` (note: `TargetBitrate`/`Resolution` defaults are stale — not yet wired to the dropdown), `StreamHealth` (bitrate/FPS/dropped/duration), `StreamStatus` enum |
|
||
| `MicStatus.cs` | Footer mic indicator: `NotConnected` / `Connected` / `Problem` — the state behind the MIC button's status dot (red = no device/capture off, green = capturing, yellow = a requested mic failed: in use/unplugged) |
|
||
| `YouTube.cs` | `YouTubeChannel` and `ChatMessage` (chat feed) — since TASK 43 every message carries `Kind` (`ChatEventKind` None/SuperChat/SuperSticker/NewMember/MemberGift/GiftReceived/MemberMilestone) + event payload fields (`SuperChatDisplayString`, `SuperStickerDescription`, `GiftNewMembersCount`, `GifterName`, `MilestoneMonths`) |
|
||
| `Socials.cs` | **Social bar** (global layer, never a Source): `SocialService` enum (YouTube/Twitch/X/Instagram/TikTok/Facebook/Discord/Kick/Threads/Bluesky/GitHub/LinkedIn/Pinterest/Snapchat/Reddit/WhatsApp/Telegram/Link/Website/**Fediverse**), `SocialEntry` (Service/Handle/ProfileUrl/`FediverseSoftware`), `SocialsConfig` (Entries + `BarPosition` Top/Bottom + `BarEnabled` on/off — `BarJustify` dropped, column back-compat), `SocialServiceIcons` (canonical URL builder + `DetectService` (URL domain / fediverse `@user@domain` → **Fediverse** / bare→Website) + bundled SVG logo path data per service (`LogoDataFor`) + `LogoDataForFediverse(software)` mapping nodeinfo software names (mastodon/peertube/pixelfed/misskey/lemmy/pleroma/firefish) to logos with a generic fediverse glyph fallback (`FediverseIconData`) + `LockedIconData`/`DoNotIconData` — initials/colors gone) |
|
||
|
||
Related: [`ViewModels/index.md`](../ViewModels/index.md) consume these;
|
||
[`Services/LayoutStore.cs`](../Services/LayoutStore.cs) persists `Scene`/`Source`.
|