Slice 4. 607 green, 0 warnings. Clips remain **off by default** and, while off, the ring is never
constructed — so no reader thread and no encoder output exist until someone asks for the feature.
- **F10** (`HotkeyId.SaveClip`, default F10, remappable in the hotkey dialog) snapshots the ring, writes
the file, prunes to the retention count and toasts the name. Empty ring → "nothing to clip yet"
instead of a zero-byte file; clips off → says so and points at Settings.
- **Settings**: Enable, length (10 or 15, default 10), keep (3/4/5, default 3). Persisted in the layout
store and **coerced on load** — a bad stored value falls back to a legal one, so the ring can never be
sized for a length the UI cannot show.
- The ring is sized from length × tier bitrate × 1.25 and rebuilt if either changes; it is created at
session start and dropped at stop, so memory is only spent while a show is running.
- The drawer states the boundary in the creator's terms: "A capture, not an editor: for trimming,
captions or a library, use a video editor."
Still to come: the replay layer itself (play once then hide in Live, loop the kept clips elsewhere).
595 green, 0 warnings. Completes TASK 55 (slice 1, log rotation, shipped 2026-10-22).
- **`AlertClipCleanup`**: the default alert clip is materialised into `%TEMP%` for ffmpeg to read, and
nothing ever deleted it — one orphan per profile that ever played an alert. Now: delete this session's
file in `Shutdown`, and sweep `ytLive-alert-*.mp4` at startup for anything a crash left behind. Only
the prefix we own is touched; a directory is never deleted.
- **`DiskSpaceGuard`**: a recording that dies of a full disk is a trust breach, so the numbers are a
pure policy — refuse to start under **1 GB** (toast; the stream still starts, recording does not),
warn under **5 GB** at start ("about eighty minutes" at 8 Mbps ≈ 3.6 GB/h), and one mid-show warning
under **2 GB** — the last useful moment before the encoder fails for a reason it won't explain.
Unreadable drives (a USB stick that just left) return null and never block a running recording.
Tests are policy-level on purpose: filling a real drive is not a test. `DiskHygieneTests` proves the
sweep only removes our own files and that the thresholds behave at both ends.
"I forgot the VPN" used to create a broadcast on YouTube that nothing ever pushed to: the app looked
live, YouTube held an empty broadcast, and the creator had to work out what happened. Prevention beats
recovery here, so go-live now asks one question first.
- `Services/IngestProbe.cs` — `IIngestProbe` + `TcpIngestProbe`: parse the RTMP URL, connect to the host
(rtmp → 1935, rtmps → 443) with a 2 s timeout. Any failure answers "not reachable"; the point is a
fast unambiguous answer, not a diagnosis.
- `MainViewModel.IngestPreflightAsync` runs **before the first API call** whenever a cached ingest URL
exists; on a first run it probes once the stream is resolved, still before any broadcast is created.
A false answer logs, tells the creator ("Nothing was created on YouTube…"), and rolls the session
back — nothing to clean up on YouTube.
- The probe is a test seam (`IngestProbeOverride`) like the camera and chroma ones.
Tests: `IngestPreflightTests` — unreachable aborts, reachable continues, URL parsing (rtmp/rtmps,
garbage), and the probe against **real sockets**: a listening port answers true, the same port closed
answers false and does so fast. FAST gate: 547 passed, 0 failed, 0 warnings.
Creator challenge (2026-11-05): "I really don't think that's going to be a constant — it's going to
depend on so many variables, some that are dark to us." Correct, so the measured-grace constant and
the countdown are dropped from the spec. YouTube's cutoff is server-side and depends on ingest health,
prior stream quality, region and load; a pinned number would be a guess wearing a timer, and it would
be wrong exactly when the creator is staring at it.
What ships instead:
- **Amber RECONNECTING** in the top bar with measured facts only: elapsed seconds and the attempt
number ("0:12 · attempt 2 of 4"). The seconds come from a stopwatch started at the drop.
- **The status poll speeds up while recovering** (30 s → 4 s) and drives the sign; it restores 30 s
when recovery ends.
- **`chatEndedEvent`** — already in the chat feed we poll and previously skipped — now raises a signal
that prompts an immediate status check. It never decides anything: `liveBroadcasts.list`
`lifeCycleStatus` stays authoritative, with `liveStreams.list` health as the push-received signal.
- At `complete`: red OFF AIR (the existing stop path) rather than a pretend-live sign.
Tests: `ChatEndedSignalTests` (the marker is not a chat row, the service raises the signal, and a
complete broadcast ends recovery with the honest message). FAST gate: 543 passed, 0 warnings.
A dead encoder used to run the whole stop path, so a one-second blip ended the broadcast. Now a dropped
push is relaunched against the same ingest while the broadcast is still alive.
- `Services/StreamRetryPolicy.cs` — immediate, +1 s, +2 s, +3 s. Minimum waits on purpose (creator
ruling): YouTube's grace is short, so every second not pushing is grace spent.
- `Services/StreamRecovery.cs` — the loop, with the audio pipe recreated before every attempt (its
server is single-instance and unusable after the old client dies, so a naive relaunch fails on a
missing input). After a push comes up it asks the API whether the broadcast survived: "complete"
ends recovery as `BroadcastComplete` instead of showing a live sign over a dead stream; an API
hiccup counts as recovered rather than ending a healthy session.
- `FramePump.EncoderFailed` — a dead push is recoverable; a compositor fault still goes through
`Failed` and ends the session, because retrying it would loop.
- `MainViewModel.Recovery.cs` — wires the steps, reports each episode into the left panel alert stack
(one row per episode, updated in place, log range painted), and cancels on Stop.
- Alert stack polish: a rule and a gap now separate the stack from the scene layers (they read as one
list before), and the licence indicator uses the creator's wording — `STEAM ID NOT PRESENT` /
`Steam ID Limit: 30fps` / `Click for More Info`, becoming `STEAM ID PRESENT` / `60fps` with a close
control once owned.
Tests: `StreamRecoveryTests` (schedule, recover on attempt 2 with the pipe restarted each time,
complete-broadcast honesty, unknown liveness, give-up, cancel, audio-restart fault),
`FramePumpTests` now pin that process death raises `EncoderFailed` and not `Failed`.
FAST gate: 538 passed (one documented pre-existing audio failure), 0 warnings.
Creator design (2026-11-05). A stack of red rows at the top of the left panel, above both mode grids
so it shows while editing and while live, pushing the panel's content down.
- Row 1 is the **Steam licence indicator** and nothing displaces it. It reads as status, not a
warning: "Entitlement 30 fps · Maximum 60 fps", both numbers derived from QualityOptions and
HasProOutput. While higher tiers are unavailable it shows a **pin** (standing indicator, no close
control); once ownership is verified the pin becomes a **close control** and the dismissal is
persisted (`Steam.LicenceIndicatorDismissed`), permanent while ownership holds. Losing ownership
restores it as pinned — a change of state, not a preference. Click → About.
- **Event rows stack beneath, newest first**, one row per episode (an episode advancing its state
updates its own row rather than adding another). Each is dismissible. Click → the Logs tab opens
with that event's sequence range painted red (`HighlightedLogFrom/To` + `LogInRangeConverter`; two
numbers rather than a collection because the log list is virtualised and realised rows do not
re-evaluate on membership changes).
- Replaces the old red panel under the quality picker, which is removed.
- The Steam diagnostic text loses "Contact the creator or support" for a neutral
"Steam licensing is not configured in this build."
Tests: `AttentionAlertStackTests` — pinned first with the status text; owned → closable and the close
survives a reload but ownership loss restores it pinned; pinned cannot be dismissed; event rows LIFO
with in-place episode updates; clicking an event opens Logs and sets its range. AboutHub + Entitlement
tests updated for the removed panel and the new wording. FAST gate: 532 passed, 0 failed, 0 warnings.
Reported 2026-11-05: "when I click Loop, the video doesn't play in the preview pane". Two
causes, both real:
- `VideoClipPipe.StartAsync` bailed out once it had run once (`_run != null`), so a clip that
reached EOF could never be started again — it held its last frame forever.
- Loop is only consulted at end-of-file by a LIVE decoder, so flipping it on a finished clip
did nothing at all.
Now: the pipe reports running state and is restartable after a natural end; the manager marks a
session finished (keeping its last frame) and exposes `IsRunning`/`RestartAsync`; the layer shows
`IsMediaRunning`/`IsMediaFinished`; flipping Loop on a finished clip restarts it.
UI: `▶ Play` sits to the right of the **Video File** label and is enabled only while Loop is off
(creator ruling: with Loop on the clip already runs continuously, so there is nothing to start).
The panel says "Clip finished — holding the last frame." so a frozen picture explains itself.
Also: verify.sh no longer runs physical-input tests by default. That test moves the real cursor
(SetCursorPos + mouse_event); running it mid-gate hijacks the machine someone is using, which is
exactly how it felt. Opt in with PHYSICAL_TESTS=1 when the desktop is idle; the header documents
the scoped-run command for working hours.
Test: `MediaPlaybackRestartTests` (pipe restart, finished state, Play again, Loop-on-finished).
8 scoped tests green. FULL SUITE NOT RUN — the machine was in use; run scripts/verify.sh in a
quiet window before the next milestone.
TASK 64 slice F — the two things left after the feature worked by hand.
- App Settings → **Video clips → Auto Green/Blue Screen** (off by default). When on, a
high-confidence detected screen is keyed as soon as the clip is added; the panel says
"Removed automatically" so an automatic change is never silent. Medium confidence still
asks, low says nothing — a wrong automatic key eats the picture.
- **A clip is a clip:** the alert box's own replacement clip keys through the same settings
block (one alert box per layout, so its settings are the ones the next alert uses), and
choosing an alert clip runs the same detector. The Green/Blue Screen panel now appears for
a video layer *or* an alert box with a custom clip (`Source.ShowsChromaKey`).
- Spill ships as the creator-facing **Fringe** switch; nothing further to tune behind it.
Test: `ChromaKeyApplyTests` gains the auto-apply case (no click, still explicit in the panel)
and an alert-clip case (its pipe asks ffmpeg for colorkey+despill with the blue screen type).
Docs: TASK 64 complete in TASKS.md, known limits recorded in the task file, HANDOFF rewritten.
verify.sh: 546 passed, 0 failed, 0 warnings.
TASK 64 slices D and E: the feature is usable end to end.
- Add a video file → one frame is probed (new `IChromaProbe`/`FfmpegChromaProbe`, one ffmpeg
pass at 160x90, off the UI thread) and the layer gets an offer: "Looks like a green screen —
Remove it", with the measured colour as a swatch.
- Accepting it turns the offer into settings (Amount / Softness / Fringe) that reach ffmpeg as
`colorkey` + `despill` + `format=bgra`, so the key is computed in the pipe and both consumers
(the shared preview bitmap and the compositor's frame) carry the same alpha.
- Media sessions are now keyed by **path + look** (`MainViewModel.MediaSessionKey`), so two
layers with the same settings still share one decoder, and changing the look releases the old
session and starts the new one. Removal, load reconciliation, loop and audio settings all move
to the same key.
- Settings persist on the `Source` row (six ALTER TABLE guards + SELECT/INSERT), so a keyed layer
comes back keyed.
- Panel section is plain creator words: Green/Blue Screen, Amount, Softness, Fringe.
Test: `ChromaKeyApplyTests` — the pipe asks ffmpeg to key (and does not when off); a green-screen
clip is offered, accepting it starts a keyed session, the layer's resolver then reads that session
rather than the old one; the setting survives a save.
Docs: TASK 64 D/E ticked with slice F (auto-apply setting + alert clips) left open; frame-pipeline
records the decode-option design; HANDOFF rewritten. verify.sh: 544 passed, 0 failed, 0 warnings.
A video file was picture-only: the decode pipe passed `-an`, so a starting-soon
or BRB clip with music played silent everywhere. Adds sound to every clip and
collapses the two decoders into one.
- `Services/VideoClipPipe.cs`: the shared pipe behind `MediaVideoSource` (TASK 21)
and `AlertClipDecoder` (TASK 47) — video (`rawvideo bgra`, scaled) + audio
(`f32le -ac 2 -ar 48000`, 50 ms chunks, byte-carry across reads), both paced to
real time, loop restarts both so picture and sound stay together. Alert
behaviour is unchanged.
- `MediaVideoSourceManager` applies the layer's Level/Mute per session and raises
`AudioAvailable`; `MainViewModel` feeds it to the new
`AudioMixer.EnqueueDesktopMediaAudio`, which joins the DESKTOP/GAME ring so the
desktop fader and the mic auto-ducker apply exactly as they do for game audio
and TRAX (creator ruling 2026-11-05: audio joins the group).
- Per-layer `MediaMuted` + existing `MediaVolume` surfaced as Mute/Level in the
properties panel; `MediaMuted` persisted (ALTER TABLE guard + SELECT/INSERT).
- Level/mute are per SESSION because one decoder is shared per file path — the
last layer touched wins; one decoder per layer would play the file twice.
Test: `MediaSourceAudioTests` — the pipe emits 50 ms chunks at 48k stereo, the
manager scales by level and drops when muted, and a media layer's sound moves the
desktop meter. Alert/decode suites unchanged and green.
Docs: task-21 closed on item 10, the "silent soundtrack" facts corrected in
frame-pipeline/output/overlays, HANDOFF rewritten. verify.sh green (529 passed;
the two documented pre-existing failures only).
TASK 21's picker slice: the decoder, manager, pacing and loop mechanism were
already shipped but nothing ever acquired a session, so a media Source rendered
nothing. Adds "Video File" to the (+) menu (video-filtered OpenFileDialog),
one decode session per distinct path with a HasSession guard, release when the
last scene reference goes, and a post-load reconcile. Loop is a manager-level
per-path answer ("any live reference loops") applied before StartAsync and
updated live via SetLooping. Properties panel shows the file with Change… and
Loop. Volume stays unwired: media audio rides the desktop loopback, TRAX-style.
Reference: OBS's media source (file → decode → composite into the scene) is the
established answer for this feature; the lifecycle shape mirrors this repo's
WebView2/ScreenCapture registration rather than inventing a new one.
Test: ytLive.Tests/MediaSourceAcquisitionTests.cs — add starts one decoder and
frames reach the layer, loop flip reaches the decoder, remove stops it.
Docs: task-21 closed, TASKS row + Day-4 row + stale 3·17 row corrected,
frame-pipeline acquisition note, HANDOFF rewritten. verify.sh green.
Use category-filtered font and selected-item dropdowns, separate horizontal and vertical alignment, and reuse the border-color palette templates for text color. Persist vertical alignment additively. Follow the established static text-source pattern: https://obsproject.com/kb/text-sources
Raster static text on UI-thread changes and reuse the same transparent BGRA frame in preview and all compositor paths. Cache text frame identity in the frame-pump signature and invalidate static bakes on edits. Follow OBS text-source conventions: https://obsproject.com/kb/text-sources
The frame pump now submits crop-sized BGRA frames; FFmpeg scales them to final tier dimensions. Bundled scaler benchmark: 300 608x1080 to 1080x1920 frames in 0.435s (scaler-only).
Reference: https://ffmpeg.org/ffmpeg-filters.html#scale-1
Add Live Chat and Logs tabs to the non-edit left panel. Expose a bounded process-local AppLog feed so the newest messages appear first without importing earlier startup.log contents or changing file logging.
Ref: https://obsproject.com/forum/resources/understanding-obs-studio-log.473
Model the AlertBox and standalone ticker with shared settings; scene tickers render the in-memory active and queued events without saving history. Keep AlertBox content active-event-only.
Ref: https://obsproject.com/kb/obs-studio-overview
Keep non-owner resolution choices visible but muted. Selecting one preserves the free tier and opens About; external navigation is only the explicit llamacasty.com link. Ref: https://streamlabs.com/desktop
The preview draws two background images — BackgroundImage and, above it, ActiveBackgroundImage
(the static art) — while the mini-pane reads the scene snapshot. The default-restore path only
called UpdateBackgroundImage, so the thumbnails updated and the preview did not.
It now calls UpdateActiveBackground as well.
Also adds the generic cure behind the Background bug: OnSelectedElementPropertyChanged invalidates
the scene bake for ANY property change. A static layer's pixels are cached by element identity, so
a property edit without invalidation repaints nothing and the control looks dead — the failure was
never specific to UseDefaultBackground, only first noticed there.
Background + thumbnail tests pass (21); Release 0 warnings.
Browse… writes the chosen picture into BOTH CustomBackgroundPath and AssetId, and the default
stamp bails when AssetId is already set. So flipping "Use default background" back on changed a
bool while the preview kept showing the custom image — it looked like the switch did nothing.
Turning the default on now clears the custom pointer and the asset, re-runs
StampDefaultBackgroundAsset for the scene's shipped art, and only then invalidates the bake,
updates the preview and refreshes thumbnails.
BackgroundTests pass (17); Release 0 warnings.
Creator request: a sound-byte browse + label under Built-in video, with an option to loop the
sound while the clip plays. The video itself is always one pass to completion.
- Source gains AlertAudioPath and AlertAudioLoop, persisted (column + migration + INSERT +
SELECT + reader, the whole chain — that chain is where the blur crashed once).
- The sound byte plays through MediaPlayer on the default output device; MediaEnded re-seeks to
zero while looping, and StopClip kills it so a tail cannot bleed into the next alert.
- The clip's OWN soundtrack moved off the mixer and onto the device as well
(Services/Audio/AlertAudioOutput: one WaveOutEvent + buffered float provider).
Why the move: the creator asked that alert audio — the clip's track or the added sound byte —
appear in the desktop sound bar. Only audio that reaches the default device is picked up by the
WASAPI loopback that feeds both the meter and the stream. The old EnqueueAlertAudio route put the
sound in the stream but left the meter flat and the room silent.
Tests: the sound byte and its loop flag round-trip through SQLite, and a fresh alert layer starts
with no sound byte and no loop. Release 0 warnings.
Sits to the right of the Built-in video pill, labelled "Test alert". It enqueues one synthetic
Super Chat through the real AlertOverlayLayer, so what plays is exactly what a viewer triggers —
the custom clip when one is set, the built-in clip otherwise — and it goes through the same
output path (preview and encoder) as a live alert. Local only: nothing reaches YouTube and no
chat row is invented.
Creator request 2026-11-01: a layer that hides part of the desktop from viewers. Box or circle,
drag/resize like any layer, one strength slider, several allowed.
**Z-order is policy, not preference.** `AddSource` inserts a blur directly above the background
and therefore below the brand logo, and `OnSceneElementsReordered` pushes any blur that ends up
above the brand back down. Nothing else in the app can move it into the brand's way.
**Overlap = the strongest single blur, never a stack.** `SceneCompositor.ApplyBlurLayers` collects
every visible blur the first time one is reached in the z-order, sorts them strongest-first, and
shares one coverage map: a pixel already covered by a stronger blur is skipped. Blurring
back-to-front would have produced something stronger than any slider setting allows, which is
exactly what was ruled out.
**One blur curve, shared with the webcam.** `RegionBlur` carries the constants the webcam blur
already used — downscale 4, radius 1–6 downscaled px, `RadiusFor(strength)` — and
`BackgroundEffectProcessor` now delegates to it instead of holding its own copy. The layer's
slider is the same 0–1 scale with the same 0.5 default, so "half strength" means the same blur in
both features. Cost is proportional to the blur's own rect, not the frame.
**Live scene only**, enforced in `AddSource` as well as the (+) menu (`CanAddBlur`), so a stale
menu item or a scripted call cannot plant one on BRB. `ElementKind.Dynamic`, so it is never baked
into the static base and every render path gets it — pump, preview, thumbnails, scene dump.
Persistence: `Source.BlurAmount` column + migration; shape rides the existing `ClipShape`.
Properties panel: Box | Circle plus the strength slider, gated on `IsBlurSelected`.
4 tests: outside the mask is byte-identical, inside loses its hard edges, a circle leaves its
box corners alone, and two identical stacked blurs equal one (the coverage map). Release builds
at 0 warnings.
Creator directive, 2026-11-01. Settings stopped being a centred modal.
- **Drawer** (Controls/SettingsDrawer): hosted in PreviewPane's pull-out stack, 320px, the same
animated-width pattern as Stream Settings / YPP / Socials / TEST, opened by the gear rail tab
on a single left click. SettingsDrawerOpen is exclusive with the other four, both directions.
This also removes the modal's MaxHeight-700 scroll problem for good: the drawer is the height
of the preview.
- **Categories**: headings with controls indented beneath them. Zoom now owns *Zoom view shape*
(Circle / Phone / Tablet) and *Zoom box follows*; Recordings, Brand logo and Scene transition
are their own categories.
- **The app menu moved to the LlamaCasty wordmark** (right-click → Report Bug / Feature Request /
About). Left-click still opens About. The gear tab no longer carries a menu at all, so clicking
it does exactly one thing.
OverlayHost keeps only the Bug / Feature / About panels; its brand-logo handlers and the dev-panel
injection moved with the settings block. BrandLogoPreviewTests follows the control (same assertions,
new path). Release 0 warnings; 15 tests pass across brand logo, zoom, entitlement and preview
history.
Two creator directives, 2026-11-01.
**Ctrl-down dismisses an open zoom box.** Window-level PreviewKeyDown, so the same hand that
opened it can put it away. It cannot cancel itself at creation: Ctrl is already held before
the right-click that makes the box, so the keydown fires while nothing is open.
**Follow mode, default Anchor.** A PillToggle in App Settings ("Follow the box"), persisted
as Zoom.FollowBox. Off — the default — keeps the 2026-10-08 model: the capture stays on the
clicked point and dragging only moves the box over it. On, UpdateZoomMove re-anchors the
capture to the box centre (half the box's size, clamped per axis), so the magnifier shows
whatever it hovers. Flipping to Follow while the box is open snaps it immediately.
Three tests: anchor drags leave CaptureX alone, follow moves it to the expected quarter-offset
centre, and the setting round-trips through LayoutStore (tested against the store, not via two
view models — two live VMs fight over the temp DB, which is a fixture problem, not a bug).
Both new test classes share a collection tag: MainViewModel.LayoutPathOverride is static, and
xUnit runs classes in parallel, so without it the two view models collided (one failure in a
combined run, clean when run apart).
Release build 0 warnings; 14 tests pass across zoom, entitlement and preview history. Debug
build is blocked by the running app (PID 47388) — close it and the exe updates.
Three creator directives (2026-11-01), done ahead of the surge.
**Gear moved to the preview rail** — first tab, orange (Brush.Attention), gear icon
only. Left-click opens the same app menu the top bar gear owned (Settings / Bug /
Feature / About), right-click goes straight to App Settings; both behaviours moved
with it, so nothing lost an entry point. TopBar keeps the wordmark and EDIT.
**EDIT right edge aligned to the layers panel.** The work area is margin 8 + a 360px
column, the top bar is padding 16, so the shared edge is 352 inside the bar. TopBar
column 0 is now a fixed 352 grid with EDIT right-aligned in it — alignment by
arithmetic instead of by eye.
**Preview undo/redo: Ctrl+Z / Ctrl+Shift+Z.** Models/PreviewHistory snapshots element
REFERENCES plus geometry, visibility, order and membership — a deep clone would mirror
every property of a dozen element subclasses and quietly miss the next one added.
One snapshot per gesture (pushed at drag/resize start, never in the move loop), bounded
at 50, redo survives multiple undos, cleared on layout load. Gated on EditingActive:
undo while the preview shows program output would rewrite a scene nobody is looking at.
Honest scope, in the type's doc comment: layout edits only. Colour/opacity/border/font
edits are not captured yet, so Ctrl+Z after one of those restores the last layout change.
6 tests in PreviewHistoryTests; 19 pass across it and the neighbouring UI classes; Debug
and Release both build at 0 warnings.
The marquee now has the dial it needs. `ScoreboardPresenter.PixelsPerSecond` is the single owner of
the range (20-400, default 120), the layer's properties expose it with a live px/s readout, and the
value is persisted as Scoreboard.ScrollSpeed because it is a READABILITY choice — re-dialling it
every launch would be a tax on the creator who needs the strip to be readable.
Advance() still takes an optional override so tests can drive exact distances.
Guard: the presenter test proves speed is real (same elapsed time, twice the speed, different
window) — not a value that is stored and ignored — and the panel test pins the control, its range
and the persistence key.
Creator: "even if it's not visible, we want to avoid polling."
ScoreboardEnabled is the layer's master switch in the properties panel. Off means two things:
- the strip frame is null in every scene (per-scene eye toggles stay independent), and
- the cadence policy returns None at every phase — a scoreboard nobody can see must not spend quota.
The switch is persisted (Scoreboard.Enabled), because one that resets would quietly resume polling.
The polling gate is ScoreboardPollsEnabled: master switch AND at least one scene with a visible
scoreboard — so hiding it in all five scenes also stops the polls.
Guards: ScoreboardCadenceTests adds the switch off across live/test/recording; ScoreboardProperties
pins the checkbox and the VM surface.
Both were mine, from the scoreboard units:
- ScoreboardLayout.FitLine null-forgave tileWidths on one expression and then iterated the field
anyway; it now binds a non-null local once and uses that throughout.
- the output resolver dereferenced _scoreboardPresenter, which is assigned in InitScoreboard — it
is nullable by construction, so the resolver reads '?.' exactly like the other optional services.
Clean build, 0 warnings, scoreboard tests green.
Adds SourceType.Scoreboard with the same per-scene eye toggle, drag and presence as every other
element — 'prominent on BRB, dialled back on Live' is geometry, not a second mechanism. Default
geometry is the strip: 1920 wide, 56 tall, bottom edge.
The output resolver returns the presenter's cached frame exactly like the chat box and alert box do,
and every session start clears the tallies. Preview publication writes one shared WriteableBitmap on
the UI thread (the pump thread must never touch one), refreshed only when a displayed value moves.
Guard: ScoreboardLayerTests pins the enum member, the geometry constants, the resolver case and the
session hook, so the layer cannot quietly become a special widget.
Creator ruling (2026-10-30): TRAX is background music and is controlled separately from desktop and
mic — so KISS it:
- TRAX loses its own ladder and slider. It is one number plus ±5 dB buttons, disabled at the ends
(−60 dB floor, +6 dB ceiling).
- It STARTS at −50 dB, taken from the creator's own meter readings, and moves in 5 dB clicks. If that
proves inaudible on their setup, six clicks lands at −20 — the buttons exist for exactly that, and
`TraxDefaultDb` is one constant.
- Layout follows: Desktop's volume now sits directly beneath its ladder, and the TRAX row (name,
play/pause, level) sits beneath that, inside the GAME bay. The bays are MIC | GAME+TRAX | LIP-SYNC.
- The metering tap on the player stays (it is how "is the music producing sound" is answered) but has
no ladder of its own; the desktop bed already shows the music.
Guards updated: TraxBayTests now asserts the stepper wiring and that the row has NO SegmentMeter;
GameBayTests asserts the desktop fader sits below the desktop ladder.
Reported: the TRAX bar moves, but its sampling looks far slower than the mic meter.
Cause: the TRAX number was a raw instantaneous peak per metering block — a stutter sampled by the UI
timer, with no smoothing. The mic looks fluid because it is smoothed at audio-callback rate.
Fix: the player now smooths its measured level with the SAME curve the mic uses
(MeterScale.NextLevel: fast attack, gentle decay), and the dock's meter clock runs at ~30 Hz instead
of 20. Two ladders that move alike, because they are the same ballistics.
Guard: MeterScaleTests pins the attack/decay behaviour alongside peak-hold.
Reported: TRAX plays audibly but no ladder registers anywhere.
Two distinct faults, one of them mine:
1. The meter readouts were refreshed only from the MIC's level callback. With a silent or absent
mic there is no tick, so a playing TRAX never updated its ladder — the level was measured, the
UI simply never asked for it. Meters now have a 20 Hz DispatcherTimer of their own.
2. If the player's own meter still reads 0 while playing, the samples are not reaching the device
(or metering is not attached). That now writes ONE line to startup.log after 2s — so the next
report says which side is broken instead of another round of guessing.
Note: TRAX rides the desktop loopback, so once the mix captures it the GAME ladder should move too;
if it does not, the loopback endpoint and the music's output device differ.
Unit 9, the one that matters most for this creator.
MASTER STRIP (top, nearest the preview):
- one ladder fed by the MEASURED mix — `AudioMixer` now measures the buffer the encoder receives
(`MasterLevel`, `MasterImbalanceDb`), so the master cannot show a source instead of the output
- `-12.4 dB` readout, and ONE L/R flag that appears above a 6 dB gap instead of a second ladder
- bitrate / FPS / dropped / duration from the existing health poll
MONO OUTPUT:
- `AudioFold.ToMono` averages each stereo pair into both channels, applied after the limiter and
the sync delay, so the stream AND the recording get what was folded
- `MonoOutput` is persisted (`Audio.MonoOutput`) and restored at startup: an accessibility switch
that resets each session is an accessibility failure
- one click in the strip, remembered forever
Guard: AudioFoldTests (hard-left reaches the right at half amplitude, hard-right — the inaudible
case — reaches the left, centred material keeps its level, mono buffers untouched) and
MasterStripTests (the strip binds the measured mix + the switch, the store round-trips it, and the
fold is the tested helper rather than new arithmetic). 33 audio tests green.
The state colours the view-models hand to bindings — top bar, REC/ON-AIR dots, health banner,
meter bands, toast tints — were hex literals in C#. They now resolve from Themes/Tokens.xaml
through `Helpers/ThemeBrush`, so the values live in one place. Without an Application (unit tests)
the helper returns a neutral grey: visibly wrong rather than silently plausible.
Four tokens the code needed and the document lacked, added to DESIGN.md (so the doc-is-the-contract
guard demanded their brushes): info-container #3a3b52, success-container #1d5c38,
warning-container #b8860b, test-container #9c6f1c (the test-stream gold bar).
Also fixed by this: the top bar still painted the RETIRED brand red #e94560 when live — the
standard's #ff5451 now, and `OnAirSignTests` (which pinned the old value) says so. BarOn/BarOff
became properties rather than static fields, because a static field would resolve tokens before
the Application exists.
Verified: DesignTokensTests, GameMeterHonestyTests, NotificationAreaIntegrationTests,
OnAirSignTests, SessionTeardownTests — 38 tests green.
- LeftPanel: SCENE LAYERS header with layer count; per-type blue icons; properties header gear; layers list min/max height; properties placeholder; list and properties indent
- SceneThumbnailStrip: names/hotkeys over the tile; PROGRAM badge with blinking red dot on the selected tile; orange border on selected and live tiles; fixed the element border override that hid the style border; reflag tiles on load
- LiveScene is now set on go-live, record start, and live transitions (it was never assigned, so IsLive never fired)
- Startup stages the scene named Starting
- DESIGN.md: color roles (red = YouTube/on-air/record, orange #ff8c3a = attention, amber = game audio/Super Chat)
- Staged live tile uses background art instead of the green LIVE placeholder
Not pushed.
The creator's locked table (2026-10-17) gives the Chat scene its own rules in
the 9:16 tier: RECT ONLY - the circle option is not offered - and a size that
is either the normal small tile or ENLARGED to fill one whole 607x540 area
(top or bottom). Unit 1 shipped the per-scene placement; this unit is the Chat
scene's own variant of it.
The rule lives on the MODEL, not on the button:
- Models/SceneElement.cs: ClipShape and ToggleClipShape() are now virtual.
- Models/WebcamSceneConfig.cs: VerticalShapeLocked (set per scene by the VM)
OVERRIDES the ClipShape property, so no writer can slip a circle in - the
toggle, the Shape button and the placement swap all go through it. The lock
is cleared BEFORE the 16:9 layout comes back, so the desktop shape returns.
- ViewModels/MainViewModel.Webcam.cs: CanToggleClipShape (the circle is NOT
offered in the vertical Chat layout - the Shape button disappears, it is not
merely greyed out), IsChatSceneCamera, ResizeWebcamInVerticalTier.
- Models/VerticalCameraLayout.cs: FillsArea (the "enlarged" state, derived -
no new column) and SizeFor - the Chat camera's TWO sizes, the tile or the
whole area, whichever is nearer the requested width, so the resize handle
has two detents instead of any size in between.
- An enlarged camera FILLS the area its centre is in (top or bottom), so
dragging it up/down swaps the areas.
- The Chat camera is auto-tiled like the Live one when the vertical tier is
picked - otherwise the vertical chat stream has no camera at all.
- Controls/PreviewPane.xaml.cs: the resize routes through the VM; the drag
assigns, lets the model clamp into the band, then snaps (so the enlarged
camera can be dragged from the top area to the bottom one).
Test: ytLive.Tests/VerticalChatCameraLayoutTests.cs - the ONE Good Dog test for
the unit: the vertical tier is picked -> the Chat camera comes into the band as
a small RECT tile -> the circle option is not offered and cannot be set even on
the model -> dragged up and enlarged it fills the TOP area exactly -> back to
16:9 the desktop layout is restored exactly and the circle option is offered
again. 430/430 tests pass, 0 warnings.
Research (the creator's table is the established practice, not our invention):
- Streamlabs' vertical guide: "splitting the screen in half horizontally,
placing the camera feed in the top half and the main content on the bottom
(or vice versa) may be the bet", and a just-chatting vertical wants the
camera "to take up most of the screen"
(streamlabs.com/content-hub/post/overlays-vertical-and-horizontal-streaming)
- Bloopbot's vertical overlay docs describe the same per-layer model we use at
scene granularity: "move or resize a layer on Vertical and it stops being
Auto-placed. It keeps the place you gave it, and the horizontal layout is not
touched" (bloopbot.com/docs/vertical-overlays-twitch-dual-format) - our
swap-at-tier-change, stored per scene.
- Landmine recorded: "about the bottom 560 px of the vertical video can be
covered by Twitch's chat and player controls on phones" (Bloopbot) - the Chat
camera's enlarged BOTTOM area may be half-hidden by the platform chrome;
TASK 53's safe-zone work decides that.
Memory in the same commit: ai.md (the Chat rules, the shape lock, the tests),
TASKS.md + TASKS/task-57-vertical-camera-layout.md (TASK 57 complete), HANDOFF.md,
MyMistakes.md (3 recipes: lock the model property not the UI button; two detents
for a discrete size set; the edit tool cannot match an oldString with an em
dash), Models/ViewModels/Controls index rows.
The zoom feature shipped without a task record while its index rows carried the
"TASK 51" label — which belongs to the webcam background effects (Remove + Blur).
For an honest catalogue and handoff:
- TASKS/task-52-zoom-box.md: feature provenance (creator-requested), the three
2026-10-08 corrections (loupe -> anchored capture over the full composite drawn
last -> never show the dim shading), shapes, implementation map, tests, DONE.
- TASKS.md: row 52 added (shipped); row 51 reworded — unblocked now that the
zoom build shipped.
- TASK 51 -> TASK 52 in Models/index.md, ViewModels/index.md, and the two code
comments that pointed at the zoom as "TASK 51".
- HANDOFF.md: pre-push readiness notes (5 commits ahead, push-safe).
Creator corrected the "loupe" zoom on 2026-10-08: the click anchors a fixed
capture region (box/2 centred on the click) and the box is a live 2x view of
that region — dragging the box never changes its content; it magnifies the
fully-composited frame (every layer, incl. webcam) and draws LAST (n+1).
Rectangle shape is 4:3 ("more of a 640x480 aspect").
- MainViewModel.Zoom.cs rewritten: ActivateZoom anchors CaptureX/CaptureY
(independently clamped); UpdateZoomMove relocates the box only; the per-frame
BuildZoomFrame/ZoomFrameBuilder path is gone.
- SceneCompositor: skips the active ZoomSceneElement in every layer loop and
BlitZooms it last via the new pure ZoomMagnifier (2x bilinear, temp snapshot
via ArrayPool, round clip).
- Preview: ZoomBox hoisted above CanvasGrid as a sibling; its brush samples the
whole composed preview at the fixed capture (2x).
- Tests: ZoomMagnifierTests (box-over-blue shows green capture at 2x incl. an
extra red "layer" — the loupe/backdrop-only regressions both fail it) +
round-clip; ZoomBoxInteractionTests rewritten (anchored capture, move-doesn't-
change-capture, 4:3/9:16/square). 404 pass, 2 known environment flakes.
Right-click now creates a transient ZoomSceneElement at z-index 1 whose pixels are a
genuine 2x magnified sample of the backdrop (live capture under art), composited into
stream/recording like any layer while the output crop stays the tier. All shapes are
centered on the click and clamped to frame; healed on load/scene-create, never persisted,
hidden from the layers list + element template (IsZoomLayer). BuildCompositorOptions is
now internal = always tier crop (test seam). ZoomFrameBuilder is a pure static sampler
(box/2 window centered on the box center, single-slot cache) proven by a banded-backdrop
test; LayerReorderPersistenceTests drag resolves rows by item since the collapsed zoom
row shifts container indices. Also books TASK 51 (webcam background Remove + Blur) and
syncs memory docs (HANDOFF, MyMistakes, indexes). Full suite: 405 passed, 0 warnings.
Right-click in the live preview now procs a box that is actually visible and
populated with the zoomed region, and each Zoom View Shape sculpts the box per
spec. OBS-style derivative: magnifier box shows the composited region and dims
the surroundings (same pattern as OBS "zoom" / preview region highlights).
Root causes of the invisible box (two WPF traps, recorded in MyMistakes.md):
- Empty <VisualBrush Stretch="None"/> used as an OpacityMask paints nothing,
so the mask alpha is 0 and the WHOLE box (border included) went transparent.
- ZoomBox lived inside CanvasGrid while its VisualBrush sampled CanvasGrid — a
circular reference WPF renders as nothing. Hoisted ZoomBox to a sibling of
CanvasGrid inside a new PreviewCanvas wrapper (same 1920x1080 space).
Shape semantics (MainViewModel.ActivateZoom):
- Circle: square, click point = center.
- VerticalRectangle (phone): tall 9:16, click point = top-left corner.
- HorizontalRectangle (tablet): wide 16:9, click point = top-left corner.
- Boxes stay fully inside 1920x1080 via Math.Clamp.
UI: ZoomRectOutline/ZoomCircleOutline shapes replace the square Border;
circle clips the box to an EllipseGeometry; brush Visual released when inactive.
Zoom View Shape dropdown now uses the standard YtComboBox style.
Test (Good Dog rule, one integration test): ZoomBoxInteractionTests verifies
aspect/anchoring/clamp per shape and the matching outline+clip in the real
MainWindow. Full suite 404 passed, 0 warnings.
Memory: HANDOFF.md zoom state updated; WPF VisualBrush traps appended to
MyMistakes.md.
Creator 2026-09-26: "the made with llamacasty flash should appear in all scenes,
not just live" and "should also appear in recordings". The presenter was
Start()/Stop()-ed from UpdateLiveVisuals()'s IsLive branch, so a recording made
WITHOUT ever going live carried no credit at all -- the exact case the creator hit
while judging compositing from local recordings.
It is now Start()ed once in the MainViewModel ctor and never stopped on live-state
churn. One start covers every scene, the preview, the stream and the recording,
because go-live and local recording are the SAME FramePump: both
Streaming.Operations.cs:68 and :199 call StartAsync with the same brandFlash:
delegate. Verified by reading both call sites, not assumed -- there is no second
encoder path that needed a "redirect". The licence gate needs no live branch at
all: IsPremium's setter already pushes BrandFlashPresenter.Enabled from anywhere.
Fixed a trap that app-lifetime exposed: Enabled = false stops the presenter's
DispatcherTimer to cut the advertisement mid-credit. When Start() was per-go-live
the next go-live restarted it; with a single app-lifetime Start() nothing would,
so a key entered mid-session would leave the credit dead until the process was
restarted. The setter now restarts the timer when re-enabling while _running.
Tests (12 facts in BrandFlashOutputTests, +2):
Credit_IsComposited_WithNoLiveSession_AndSoARecordingCarriesIt -- drives a real
never-live VM past the 5s first-flash delay and asks the frame the pump would
composite. Uses a new internal AdvanceBrandFlash seam; because Advance only
advances the cadence while the presenter is running, a credit coming out
proves Start() happened at construction.
ADowngradeMidSession_RestartsTheCadenceTimer -- asserts the premium/downgrade
edge decision directly (IsCadenceTimerEnabled) instead of sleeping through a
30-60s interval, which a synchronous test body cannot observe.
Full suite 364/364.
The credit existed only as a WPF BrandFlashLayer TextBlock in the preview at
25% opacity on a 300s timer. A viewer of the stream or the recording never saw
it, so "free tier shows branding" was not actually being delivered. The frame
pump has carried an unused per-frame flashFrame slot for exactly this.
Reverses the documented "Pre-GA posture" (ai.md Monetization), which kept the
flash preview-only so test VODs stayed clean. Creator ruling 2026-09-26: the
free tier has to be honest advertising, so it now reaches the broadcast.
One rendered VideoFrame feeds BOTH the frame pump and the preview, so the
creator's view cannot drift from what viewers get. Spec: 500ms in / 1000ms hold
/ 500ms out, first credit ~5s after go-live then every rand(30s)+30s, single
unwrapped line at a random spot inside the frame every time, neon white core
with a feathered red/blue halo.
Neon recipe is derivative work, per AGENTS.md: bright core + feathered
multi-radius halo with R and B split in opposite directions, from
https://nudaui.dev/components/neon-glow (layered text-shadow falloff),
https://help.maxon.net/rg/en-us/Content/html/Blurs-and-Glows-chromatic-glow.html
("with no displacement, the green channel is all but invisible behind your
white text" once R and B are split) and the OBS obs-stroke-glow-shadow
"feathered stroke with user-defined size and intensity". Neon blue is #4d8bff
rather than the theme's #0f3460, which renders near-black as a halo.
Also fixes a PRE-EXISTING bug found on the way: FramePump's fully-static
shortcut stretched the cached bake and returned it, silently discarding every
per-frame overlay - the social bar and the alert ticker were already lost
there. SceneCompositor.Overlay is now internal (it copies before blitting, so
the bake is never mutated) and the shortcut composites overlays first.
The credit is deliberately NOT folded into SceneGraph.GetBakedBase:
SceneRegion.Matches compares element ids only, so a credit in the cached bake
would freeze there and never expire. Per-frame only, and Epoch is stamped
every read because the 8MB master buffer is recycled - without that the
paste cache would freeze a stale credit.
BrandFlashEnabled is now derived !IsPremium and non-assignable, and the
presenter re-checks the licence on every read, so a key entered mid-credit
cuts the advertisement on the next tick instead of letting it finish.
Tests: 10 new facts. 357 total, 356 pass; the one failure is the known
environment-flaky RealMouseDrag layer test (needs an uncovered desktop
session). Adds RealAppHost.RunAsync - a frame-pump test must await inside the
collection's shared STA thread or the whole suite deadlocks silently.
NOTE: scope-check.sh flags Helpers/InstanceProfile.cs, AppLog.cs,
TokenStore.cs, WebView2Manager.cs and InstanceIsolationTests.cs as outside
this commit. That is a false positive: it uses `git diff HEAD`, which cannot
distinguish a planned second commit in the same session from an unrelated
edit. Those files are the dev multi-instance unit, committed immediately
after this one - as is the InstanceProfile paragraph in ai.md, which shares a
file with the Monetization section corrected here.
The creator confirmed the clip fix ("the video plays now"), then asked where the
scrolling text was — it was invisible, for a structural reason. AlertTickerFrame
existed only as a frame-pump callback blitted into the OUTPUT; PreviewPane.xaml had
no element for it, because the strip is master-width and global, not a Source, so it
cannot ride a per-element Image. Nothing was wrong in the renderer: there was no
consumer in the preview. Same class of defect as the missing IsAlertBox trigger, one
layer up (MyMistakes RULE 5/6).
- tickerPreviewSink on AlertOverlayLayer, published from RefreshAlertPreviews() so it
is always the UI thread; MainViewModel.AlertTicker writes it into one reused
WriteableBitmap bound to a new global AlertTickerElement, mirroring SocialBarElement.
- Source.AlertDisplayMethod + panel "Display" selector: TickerScroll / Flash / Solid.
Flash pulses 0.5s on / 0.5s off for the whole alert; Solid is centred and still.
- The marquee was also unreadable: a fixed 140px/s took ~17s per pass, so a 10s alert
showed the text once, entering from the right and never crossing. Paced in reads per
alert instead (TickerReadsPerAlert = 3 inside the alert's own length, speed derived
from it) — never px/s. Research (websearch: how do OBS/Streamlabs/StreamElements
alert boxes present announcement timing?) settled the unit: Streamlabs exposes "Alert
Duration: choose how long your alert stays on your stream" and "Text Delay", never a
scroll-speed slider (https://support.streamlabs.com/hc/en-us/articles/52499995174299-Setting-up-Your-Streamlabs-Alerts).
Run is phase-started half a frame in so the first frame isn't blank.
- Persistence: AlertDisplayMethod INTEGER NOT NULL DEFAULT 0 via the idempotent
table_info migration, appended LAST in the SELECT because the Source reader is
positional (GetInt32(32..34)) — a mid-list insert would silently shift a neighbour.
Tests: 15 new facts (suite 339/339). RealApp STA host: the pane draws the strip and
collapses at alert end; the layer publishes a real 1920x48 frame for all three methods
and nothing when the ticker is off; three passes counted in 10s by the pill's leading
edge resetting (a seamless marquee never blanks, so an empty frame cannot count a pass);
Solid byte-identical at every moment; Flash on for half of each second; the panel shows
and writes back the choice; the DB round-trips all three alert fields together.
Incidental finding: a bound ItemsSource ComboBox in LeftPanel.xaml broke
LayerReorderPersistenceTests.RealMouseDrag (that test injects PHYSICAL mouse input, so a
load-time re-measure moves the rows out from under the cursor). Rewritten as inline
ComboBoxItems, the shape the chat Font selector already uses in that panel. Recorded as
MyMistakes RULE (8).
gramps