Creator (2026-10-30): pre-1.0, use DEBUG — add a toggle that simulates the ticker so the strip can
be SEEN and its compositing verified before a real stream.
The sample travels the REAL ScoreboardRecorder a stream uses (one new member, a gift of three, a
milestone, a $12.34 Super Chat), so what the preview shows is exactly what live events produce — a
fake renderer would prove nothing. Toggling off clears to an empty session, so the empty state is
visible too.
Debug-gated at COMPILE time: `DevelopmentBuild` is a const true in DEBUG / false in Release, and the
checkbox binds its Visibility to it. A shipped Release build therefore has no dev control at all,
rather than one hidden by a runtime flag.
Guard: ScoreboardSimulationTests — the sample lands all four tallies through the recorder, off clears,
and the panel + const pair exist in the Dual (DEBUG/Release) form.
Creator: "even if it's not visible, we want to avoid polling."
ScoreboardEnabled is the layer's master switch in the properties panel. Off means two things:
- the strip frame is null in every scene (per-scene eye toggles stay independent), and
- the cadence policy returns None at every phase — a scoreboard nobody can see must not spend quota.
The switch is persisted (Scoreboard.Enabled), because one that resets would quietly resume polling.
The polling gate is ScoreboardPollsEnabled: master switch AND at least one scene with a visible
scoreboard — so hiding it in all five scenes also stops the polls.
Guards: ScoreboardCadenceTests adds the switch off across live/test/recording; ScoreboardProperties
pins the checkbox and the VM surface.
Creator ruling: the Scoreboard layer exists in every scene rather than being added five times.
ScoreboardHealer.Ensure keeps exactly one per scene — healed on load like the Background and Brand
logo — so a scene can never end up with two, and 'off' is the ordinary per-scene eye toggle rather
than a delete.
It is appended as the TOPMOST layer on purpose: a full-width strip draws over the scene, and
inserting it above the background would break the Brand logo's documented invariant (directly above
the background). That choice is also why the layer-reorder test still passes untouched.
Also: a layer-list icon for the type, so the row is not blank.
Guard: ScoreboardHealerTests — one per scene, topmost, exact strip geometry, idempotent, and a
duplicate healed back to one.
Both were mine, from the scoreboard units:
- ScoreboardLayout.FitLine null-forgave tileWidths on one expression and then iterated the field
anyway; it now binds a non-null local once and uses that throughout.
- the output resolver dereferenced _scoreboardPresenter, which is assigned in InitScoreboard — it
is nullable by construction, so the resolver reads '?.' exactly like the other optional services.
Clean build, 0 warnings, scoreboard tests green.
ScoreboardCadence.Due(phase, lastAnalytics, lastSubscribers, now) is the creator's rule as a pure
function: watch hours ONLY during a live stream, every 30 minutes (Analytics answers in days and
test/record sessions have no public audience, so querying then is pure waste); subscribers whenever
the app is working, every 60 s; and nothing at all when idle.
Deliberately returns 'no poll' rather than 'analytics only' — a poll kind the poller cannot perform
is a bug waiting for a caller.
Remaining for the scoreboard: the HTTP providers behind this policy (watch hours via Analytics
reports.query, subscribers via channels.list) and the timer that calls Due(). Recorded in HANDOFF.
Adds SourceType.Scoreboard with the same per-scene eye toggle, drag and presence as every other
element — 'prominent on BRB, dialled back on Live' is geometry, not a second mechanism. Default
geometry is the strip: 1920 wide, 56 tall, bottom edge.
The output resolver returns the presenter's cached frame exactly like the chat box and alert box do,
and every session start clears the tallies. Preview publication writes one shared WriteableBitmap on
the UI thread (the pump thread must never touch one), refreshed only when a displayed value moves.
Guard: ScoreboardLayerTests pins the enum member, the geometry constants, the resolver case and the
session hook, so the layer cannot quietly become a special widget.
ScoreboardTiles decides which of the eight facts appear and shapes their text (money uses the
session's dominant currency and flags a second one rather than converting; watch hours carry
'as of {date}' because Analytics is a daily aggregate). Tiles are OPT-IN, so 'None' really means the
layer draws nothing, and 'Default' is the six session facts.
ScoreboardPresenter owns the raster cache: ScoreboardRecorder.Changed fires only on a visible change,
so the strip rebuilds only then — a per-tick raster would be the compositor's most expensive layer
for identical pixels.
Guard: ScoreboardPresenterTests asserts the cache identity (same instance when nothing moved, a new
frame when a value moved, reuse when a recipient-side gift event arrives) and that an empty selection
returns no frame at all.
ResolveEdges: the strip and the social bar are a coupled pair that own opposite edges whenever both
are visible; the social bar keeps its choice and the scoreboard is pushed to the other edge. Hide
either and the survivor keeps its own preference — so hiding the scoreboard frees the social bar,
which is what 'resolved at render time' has to mean.
FitLine: takes MEASURED tile widths (the renderer measures with FormattedText; a guessed character
width would make the fit lie for a long handle), keeps full size when it fits, shrinks above the
14px legibility floor, and only then wraps — never scrolls, because a reader cannot wait for the
fact to come round.
ScoreboardRecorder owns the one scope the numbers promise. StartSession resets and marks running;
Record ignores everything outside a session (a stale tally from the last stream is exactly the
'today' lie this design avoids); EndSession freezes the numbers but stops them moving, so an End
screen can still show them. Changed fires only when a displayed value actually moves, which is what
keeps the strip's raster cache honest.
ScoreboardState folds the six live-chat event kinds into the numbers a creator puts on screen:
last member, last Super Chat, last gift, members gained, milestones, and session money per
currency. Scope is the running session (creator ruling): reset at start, dead at End, no
persistence.
Two rules are load-bearing:
- money is keyed by currency and never summed across them; the tile shows the dominant currency by
VALUE, so a single EUR tip cannot flip the display away from the larger USD total
- a gifted membership is counted ONCE, from membershipGiftingEvent (which carries the count);
giftMembershipReceivedEvent is the recipient's view of the same purchase and changes nothing.
The test fires five recipient events after one purchase of five and the total must not move.
- The dock now sits in the preview column (Grid.Column=1), so its left edge is the layers panel's
right edge instead of starting under the brand column. It is a preview-column control, not a
full-width footer.
- Expanded height 168 → 148 (112 bays + 36 master strip): the mockup's number read as wasted space
beneath the 154px scene strip.
Guard: AudioDockLayoutTests pins 148 as the design number, so the constant cannot drift silently.
Unit 4 of the sound-bar refactor. `Controls/AudioDock` takes the bottom row that held the empty
`BottomBar` spacer (deleted): four bay containers (MIC / GAME / TRAX / LIP-SYNC) above a 36px
master strip, all token-styled.
Height comes from `Models/AudioDockLayout`, not from a setting: 168px normally, 36px below a 900px
window height. At the 1366×768 minimum a full dock leaves ~398px for the preview, so the collapse
is mandatory, not cosmetic. The dock listens to its window's SizeChanged and re-applies.
Nothing here pretends to be a meter yet — the bays and the master readouts fill in over the next
units, each with its own test.
Guard: AudioDockLayoutTests pins both sides of the threshold (768 collapsed, 1040 expanded), the
boundary itself, and the two heights as the design's numbers.
Reported: EDIT on + ON-AIR on, signed out → the button reads "Test Stream" and cannot be pressed.
Cause: the primary button bound straight to StartTestCommand, whose CanExecute needs a connection.
StartSession already routed signed-out ON-AIR to the sign-in flow; the test path bypassed it.
The route is now explicit and pure: RouteFor(kind, connected) → SignIn | Record | Live | Test. The
primary command calls SignInAsync for the SignIn route, BeginTestStream for Test, StartSession
otherwise — so the label, the action and the sign-in fallback cannot drift apart. Pinned in
SessionStartDecisionTests for both live and test, connected and not.
Creator ruling (2026-10-30):
- EDIT off + ON-AIR armed → the primary button reads "Go Live" and runs the livestream.
- EDIT on + ON-AIR armed → the same button reads "Test Stream" and runs the test broadcast.
- REC armed (or nothing armed) → "Start Recording", whatever EDIT says; there is no test
recording, and an unarmed start records locally rather than doing nothing.
So the fifth button was redundant: `ShowTestButton` no longer feeds any control. The decision is a
pure function (`Models/SessionStartDecision`) so the whole matrix is testable without a window;
`PrimaryStartCommand` follows the same kind, so label and action cannot disagree.
Guard: SessionStartDecisionTests pins the four cases, including the no-dead-ends fallback that my
first version got wrong (unarmed returned Live instead of Record — the test caught it).
Note for the v1 gate: the "hide TEST at v1" item is now satisfied by construction — the test path
is a mode of the primary button, not a separate control.
In the Socials drawer, under the show/hide switch: text colour, an optional background plate
with its own colour and opacity, and a text drop shadow. The bar had been hard-wired
white-on-transparent since it shipped.
- `SocialsConfig` gains five additive properties (BarTextColor, BarBackgroundEnabled,
BarBackgroundColor, BarBackgroundOpacity, BarTextShadow).
- Persistence: five new Socials columns, added by the per-column idempotent migration pattern
(a half-migrated DB heals instead of failing), written in Save and read back in Load with
defaults for pre-existing rows.
- `SocialBarRenderer.Render(entries, SocialBarStyle?)` — the look is a separate value type so the
renderer stays a pure "entries + look" function and the preview can never read a half-applied
config mid-edit. A malformed hex falls back to white/black instead of throwing inside a render
tick.
- The plate hugs the entries (rounded 20px, padding) so it reads as a caption bar, not a band
across the frame. Off by default, because transparent is what creators have today.
- The colour pickers reuse `BorderColorPalette` — one catalogue of the app's colours, per the
TASK 60/63 rule.
Guard: SocialBarAppearanceTests paints the real strip and inspects pixels — default is white with
no plate, a red text colour reaches the glyphs, a 55% blue plate yields half-transparent blue
pixels, and the shadow adds dark pixels that were not there before.
- Source.IsBrandLogo persisted (additive migration); layer healed on load, removal blocked
- Image stored as an asset; settings keep the asset id and file name
- App Settings: Brand Logo file field with Browse
- Default placement top-left; per-scene eye uses the existing element visibility
Test: BrandLogoTests; layout/background tests pass (34). Not pushed.
- LeftPanel: SCENE LAYERS header with layer count; per-type blue icons; properties header gear; layers list min/max height; properties placeholder; list and properties indent
- SceneThumbnailStrip: names/hotkeys over the tile; PROGRAM badge with blinking red dot on the selected tile; orange border on selected and live tiles; fixed the element border override that hid the style border; reflag tiles on load
- LiveScene is now set on go-live, record start, and live transitions (it was never assigned, so IsLive never fired)
- Startup stages the scene named Starting
- DESIGN.md: color roles (red = YouTube/on-air/record, orange #ff8c3a = attention, amber = game audio/Super Chat)
- Staged live tile uses background art instead of the green LIVE placeholder
Not pushed.
The creator (2026-10-21), on Live -> Layers -> webcam -> Properties:
"why does the drop down under the web cam properties not show the same style for
the border color drop down list box?"
"one of the first things we did was define branding. We established look-and-feel
standards. And yet you keep ignoring these and I'm wondering why"
WHY IT WAS MISSED - the answer the creator is owed.
The TASK 58 sweep had already walked the whole app for un-themed controls and the
border picker STILL was not themed, because the sweep looked for control TYPES
(ComboBox / CheckBox / TextBox) carrying no theme style - and the border picker was
NONE of those. It was a "..." Button whose Click handler built a ContextMenu of
swatches in code. It was never in the sweep's scope, and PropertiesStyleTests.cs
(a type-based guard) could not see it either. A picker that LOOKS like a drop-down
is invisible to a type-based audit; the guard has to ask "is this the app's widget?".
WHAT CHANGED
- The picker is now the app's YtComboBox - the widget the Display and Font pickers
wear - bound to the palette (SelectedElement.BorderColorOptions) with its selection
bound by VALUE (SelectedItem -> BorderColorEntry), because WPF's SelectedValue
matching is ordinal and the palette mixes #FFFFFF and #e94560.
- The closed box shows the swatch + the colour's NAME; the rows show swatch + hex +
name (the rows the creator approved in TASK 60). A ComboBox cannot do that with one
ItemTemplate - WPF copies it into the read-only SelectionBoxItemTemplate - so
Helpers/ClosedBoxTemplateSelector.cs picks by the ContentPresenter's templated
parent: the ComboBox for the closed box, the ComboBoxItem for a row. Verified
against WPF with a throwaway probe, not assumed.
- The swatch is painted by the THEME (Helpers/HexToBrushConverter.cs, registered as
HexToBrush) - the hand-painted SolidColorBrush(Color.FromRgb(...)) in the old
click handler was the exact anti-pattern the theme forbids. The swatch also carries
a 1px #2a3a5e border now, so black and dark swatches are visible on the dark menu
(the follow-up TASK 60 left open).
- The hex field stays (60px, editable): a colour outside the palette can still be
typed, and the drop-down then carries that hex as a NAMELESS entry ("no name" is the
honest answer). The palette's name moved out of TASK 62's TextBlock into the
drop-down's closed box.
- The hand-built menu, its ContextMenu/MenuItem/SolidColorBrush code and
WebcamBorderColorPicker_Click are gone.
MODEL: SceneElement.BorderColorName -> BorderColorEntry (the palette entry for the
current hex, with its name; setting it writes the hex back) + BorderColorOptions (the
palette plus the custom entry), both raised when BorderColor changes.
BorderColorPalette gains EntryFor(hex) and OptionsFor(hex); NameOf delegates.
Guards: ytLive.Tests/BorderColorPickerTests.cs (the ONE test for this change - the
model, the panel, and the REAL widget: with the app's theme style and the panel's own
templates the closed box names the colour and the rows show the hex AND the name).
The TASK 60 guard (BorderColorPaletteTests) was updated because the mechanism it
asserted - a code-built menu - no longer exists; it now guards the new wiring (the
drop-down is bound to the palette and neither the panel nor the code-behind carries a
second list of colours).
Full suite: 435/435 passed, 0 warnings.
The creator (2026-10-21), on Live -> Layers -> webcam -> Properties:
"the Y and H boxes under webcam properties should be the same width as the X and W
boxes and those widths should be fixed to accomodate the max number of possible
digits providing the geometry values"
"also the border color drop drown box content should also include the name of the
color next to the hex value as they in the drop-down list box"
TASK 61 - one fixed width for the four geometry fields.
The row is a DockPanel, and WPF sizes an element to its CONTENT unless it is told
otherwise, while the LAST child of a DockPanel fills the remaining space. So X/W (not
last) were as wide as their text and Y/H (last) stretched across the row - two widths
for the same kind of field. Now all four carry Width="44" and the rows set
LastChildFill="False" (without it the last field ignores its own Width and fills anyway).
44px is the measured width of "-1920" in the app's font at 11px (the largest geometry
value - the master frame is 1920x1080 - plus a sign) plus the field's padding and
border. Docs: https://learn.microsoft.com/en-us/dotnet/api/system.windows.controls.dockpanel.lastchildfill
The guard MEASURES the widest value with WPF's FormattedText instead of asserting a
magic number, so a font change cannot silently make the field too narrow:
https://learn.microsoft.com/en-us/dotnet/api/system.windows.media.formattedtext
TASK 62 - the border field names its colour.
SceneElement.BorderColorName carries the palette's name for the current colour
("Crimson") and is raised when the colour changes; it is EMPTY for a custom hex the
creator typed, because "no name" is the honest answer. BorderColorPalette.NameOf
changed to match (it used to fall back to the hex itself; the TASK 60 test assertion
was updated with it). The hex field keeps a fixed width (60) so the name sits right
next to the hex instead of drifting to the row's far edge - the same trap as TASK 61.
Guards: ytLive.Tests/GeometryFieldWidthTests.cs, ytLive.Tests/BorderColorNameTests.cs
Full suite: 435/435 passed, 0 warnings.
The creator: "under Live->Layers->webcam->Properties->border color: in the drop
down box, the #hex values are good, but add a corresponding color name/label next
to the value."
Each row now reads "#e94560 Crimson" - the hex stays exactly as it was, the
colour's name goes next to it (dimmed #a0a0b0 so the hex reads first), and the
tooltip becomes "Crimson (#e94560)".
The 14 colours were a hard-coded string[] inside the click handler - a list of
bare strings cannot carry a name, and a list hidden in UI code cannot be asserted
on. They now live in Models/BorderColorPalette.cs: NamedColor(Hex, Name) +
BorderColorPalette.All (the single source of truth) + NameOf(hex), which answers
case-insensitively and falls back to the hex for a colour outside the palette.
The picker builds its menu from the catalogue and no longer knows any colour by
heart.
The names are chosen not to collide - the palette has two greens, two blues and
two warm colours: #00FF00 is Lime and #22c55e Emerald, #0000FF is Blue and
#3b82f6 Azure, #FF8800 is Orange and #f59e0b Amber.
Guard: ytLive.Tests/BorderColorPaletteTests.cs - every entry valid + named, no
hex or name repeated, the 14 legacy colours all still offered, NameOf answers,
and the old list is gone from the handler. 433/433 green, 0 warnings.
The creator's ruling on the webcam's properties: a "Shape" title above the
Mirror/Rect row; the drag hint indented under that row "to show parentage";
the same for Geometry, Border Color, Border Thickness; Remove and Blur indented
under Background; Strength indented under Blur.
One rule covers it: a title owns its content and the content is indented one
level (10px) under it - two levels where a title is itself nested (Strength
under Blur under Background). The titles are SemiBold 11px #a0a0b0 like the
ones already there.
The shape also stops being a toggle button that shows the NEXT action ("Round"
when the camera was a rectangle) and becomes a CHOICE: two segment options,
Rect | Circle, with Rect selected by default - which is what the creator asked
for ("Rect should be selected as a default if none exists"). The old
ShapeButtonText is gone.
The mutual exclusion lives in the MODEL: IsRectShape/IsRoundShape on
SceneElement, each setter flipping the shape through ToggleClipShape() (so the
pre-round rect is still stored/restored) and always re-raising, so a refused
write - the vertical Chat layout is rect-only (TASK 57) - makes the UI snap
back instead of sticking. Deliberately NOT a WPF RadioButton group: a group
unchecks its siblings by setting IsChecked in code, which makes WPF drop the
binding (stackoverflow 7376373; the same trap measured in 50980687/57275046).
The Circle option stays hidden where CanToggleClipShape is false, so the circle
is still not offered in the vertical Chat layout.
Guard: ytLive.Tests/PropertiesHierarchyTests.cs - the model half (Rect by
default, pick circle, pick rect, the locked Chat layout refuses the circle) and
the panel half (the Shape title owns both options, the circle is the gated one,
the hint is indented and follows the row, every titled block's content is at
10px, Strength at 20px). 432/432 green, 0 warnings.
The creator's locked table (2026-10-17) gives the Chat scene its own rules in
the 9:16 tier: RECT ONLY - the circle option is not offered - and a size that
is either the normal small tile or ENLARGED to fill one whole 607x540 area
(top or bottom). Unit 1 shipped the per-scene placement; this unit is the Chat
scene's own variant of it.
The rule lives on the MODEL, not on the button:
- Models/SceneElement.cs: ClipShape and ToggleClipShape() are now virtual.
- Models/WebcamSceneConfig.cs: VerticalShapeLocked (set per scene by the VM)
OVERRIDES the ClipShape property, so no writer can slip a circle in - the
toggle, the Shape button and the placement swap all go through it. The lock
is cleared BEFORE the 16:9 layout comes back, so the desktop shape returns.
- ViewModels/MainViewModel.Webcam.cs: CanToggleClipShape (the circle is NOT
offered in the vertical Chat layout - the Shape button disappears, it is not
merely greyed out), IsChatSceneCamera, ResizeWebcamInVerticalTier.
- Models/VerticalCameraLayout.cs: FillsArea (the "enlarged" state, derived -
no new column) and SizeFor - the Chat camera's TWO sizes, the tile or the
whole area, whichever is nearer the requested width, so the resize handle
has two detents instead of any size in between.
- An enlarged camera FILLS the area its centre is in (top or bottom), so
dragging it up/down swaps the areas.
- The Chat camera is auto-tiled like the Live one when the vertical tier is
picked - otherwise the vertical chat stream has no camera at all.
- Controls/PreviewPane.xaml.cs: the resize routes through the VM; the drag
assigns, lets the model clamp into the band, then snaps (so the enlarged
camera can be dragged from the top area to the bottom one).
Test: ytLive.Tests/VerticalChatCameraLayoutTests.cs - the ONE Good Dog test for
the unit: the vertical tier is picked -> the Chat camera comes into the band as
a small RECT tile -> the circle option is not offered and cannot be set even on
the model -> dragged up and enlarged it fills the TOP area exactly -> back to
16:9 the desktop layout is restored exactly and the circle option is offered
again. 430/430 tests pass, 0 warnings.
Research (the creator's table is the established practice, not our invention):
- Streamlabs' vertical guide: "splitting the screen in half horizontally,
placing the camera feed in the top half and the main content on the bottom
(or vice versa) may be the bet", and a just-chatting vertical wants the
camera "to take up most of the screen"
(streamlabs.com/content-hub/post/overlays-vertical-and-horizontal-streaming)
- Bloopbot's vertical overlay docs describe the same per-layer model we use at
scene granularity: "move or resize a layer on Vertical and it stops being
Auto-placed. It keeps the place you gave it, and the horizontal layout is not
touched" (bloopbot.com/docs/vertical-overlays-twitch-dual-format) - our
swap-at-tier-change, stored per scene.
- Landmine recorded: "about the bottom 560 px of the vertical video can be
covered by Twitch's chat and player controls on phones" (Bloopbot) - the Chat
camera's enlarged BOTTOM area may be half-hidden by the platform chrome;
TASK 53's safe-zone work decides that.
Memory in the same commit: ai.md (the Chat rules, the shape lock, the tests),
TASKS.md + TASKS/task-57-vertical-camera-layout.md (TASK 57 complete), HANDOFF.md,
MyMistakes.md (3 recipes: lock the model property not the UI button; two detents
for a discrete size set; the edit tool cannot match an oldString with an em
dash), Models/ViewModels/Controls index rows.
The vertical tier is a centred band crop of the SAME 1920x1080 master (band x
656.25, w 607.5, h 1080), so the 16:9 camera placement (x~1408) falls outside the
cropped window and the creator is simply not in the vertical stream. Each scene
now keeps its own vertical position, size and shape; switching back to 16:9
restores the desktop layout exactly (the creator's locked table, 2026-10-17).
Geometry only - NO render-path change. The preview and the compositor both read
the element's own X/Y/W/H + ClipShape, so the tier switch swaps the LIVE geometry:
- Models/VerticalCameraLayout.cs (new): the pure math - the band, its two 607x540
areas, the six spots (top/bottom x left/centre/right), the 32px inset and the
270x152 default tile (480x270 in the 1080x1920 output) in the bottom-right spot,
the corner the 16:9 default webcam uses.
- Models/WebcamSceneConfig.cs: the vertical placement lives in seven additive
columns (VerticalX/Y/Width/Height/ClipShape/RectWidth/RectHeight; NULL = "this
scene has no vertical placement yet"). The 16:9 layout stays in the old columns
and is parked in the transient Landscape* fields while the vertical tier is
live; Begin/EndVerticalLayout + CommitLiveLayoutToVertical do the swap. The
X/Y/W/H overrides clamp every write into the band - outside it the camera is
invisible in the vertical output.
- Models/SceneElement.cs: X/Y/Width/Height became virtual so the derived element
constrains every writer (drag, resize handle, typed fields) in ONE choke point
instead of three writers each re-implementing the rule.
- ViewModels/MainViewModel.Webcam.cs + .Streaming.cs: IsVerticalTier/VerticalBand,
ResolveVerticalCameraLayout(s) (the tier swap), MoveWebcamInVerticalTier /
SnapWebcamInVerticalTier (the six-spot snap, by the tile's centre),
EnsureVerticalCameraLayout; ApplyStreamQuality is the tier-change hook. The
Live scene gets its small tile automatically on the first vertical switch (the
vertical stream would otherwise have no camera at all); the other scenes keep
their 16:9 placement until the creator drags them into the band.
- Controls/PreviewPane.xaml.cs: the drag/resize route through the VM snap under
the vertical tier instead of free-floating over the master.
Controls/LeftPanel.xaml: the webcam properties gained a Geometry section
(X/Y/W/H) for the manual entry the creator asked for, bound to the LIVE
placement, gated on the VM's IsWebcamSelected (NOT SelectedElement.IsWebcam -
the TASK 51 test finds that panel by binding text and would match twice).
- The store: seven guarded ADD COLUMNs, the INSERT/SELECT extended, and the
X/Y/W/H/ClipShape columns stay the 16:9 layout - while the vertical tier is
live the save writes the parked values there and the live ones into Vertical*.
Test: ytLive.Tests/VerticalWebcamLayoutTests.cs - the ONE Good Dog test. The
vertical tier brings the Live camera INTO the band as a small tile; dragging it to
the top-right lands it top-right inside the band; back to 16:9 the desktop layout
is restored exactly (1408/778/480x270); both placements survive a save + reload.
Full suite 429/429, 0 warnings. LayerReorderPersistenceTests.RealMouseDrag fails
ALONE on a clean tree in this environment - pre-existing flake, proven by stashing
this work, not a regression.
Derivative work: OBS has no built-in per-aspect-ratio layout storage - the
maintainers' answer is "create a second scene and add the scene you want to send
as source" (obsproject.com/forum/threads/161307) - and Streamyard's dual-aspect
guide says the same ("no built-in way to store separate layouts per aspect ratio",
so you rely on manual workarounds and plugins):
https://streamyard.com/blog/dual-aspect-ratio-streaming-tool
Our per-scene, per-tier stored placement, resolved on the tier change, is the
step past both.
Memory in the same commit: ai.md (new section), TASKS.md + TASKS/task-57-*.md
(Unit 1 shipped, Unit 2 = the Chat scene still open), HANDOFF.md, MyMistakes.md
(the per-tier geometry-swap recipe, the binding-text panel trap, the store's
webcam-identity rule) and the Models/Services/ViewModels/Controls index rows.
- Model: Google's official MediaPipe Selfie Segmenter (landscape, Apache-2.0 per model card),
converted to ONNX by tools/selfie-seg/convert_tflite_to_onnx.py (custom op
Convolution2DTransposeBias -> ConvTranspose) and verified against MediaPipe's own runtime
(verify_against_mediapipe.py: max |diff| 5e-5, 100% binary agreement). Embedded resource, 430 KB.
- Services/BackgroundEffects: IPersonSegmenter seam, OnnxPersonSegmenter (onnxruntime 1.31.0 CPU,
never throws), BackgroundEffectProcessor (None passthrough, Remove = alpha mask). Not wired yet.
- Tests: Remove integration test (fake segmenter) + bundled-model contract test vs MediaPipe
reference mask. Full suite 407/408 — the one failure is the documented interactive-desktop flake
RealMouseDrag_OnTheLayerList_PersistsTheReorder (passed in the run before; code path untouched).
- Docs: ai.md reversal + section + licensing guard, THIRD-PARTY-NOTICES 11-12, TASK 51, indexes,
MyMistakes recipe, HANDOFF.
References: obs-backgroundremoval (approach only — ONNX Runtime on CPU, 2 threads; GPL-3.0, no code
used) https://github.com/royshil/obs-backgroundremoval ; MediaPipe image segmenter
https://ai.google.dev/edge/mediapipe/solutions/vision/image_segmenter
The zoom feature shipped without a task record while its index rows carried the
"TASK 51" label — which belongs to the webcam background effects (Remove + Blur).
For an honest catalogue and handoff:
- TASKS/task-52-zoom-box.md: feature provenance (creator-requested), the three
2026-10-08 corrections (loupe -> anchored capture over the full composite drawn
last -> never show the dim shading), shapes, implementation map, tests, DONE.
- TASKS.md: row 52 added (shipped); row 51 reworded — unblocked now that the
zoom build shipped.
- TASK 51 -> TASK 52 in Models/index.md, ViewModels/index.md, and the two code
comments that pointed at the zoom as "TASK 51".
- HANDOFF.md: pre-push readiness notes (5 commits ahead, push-safe).
Creator corrected the "loupe" zoom on 2026-10-08: the click anchors a fixed
capture region (box/2 centred on the click) and the box is a live 2x view of
that region — dragging the box never changes its content; it magnifies the
fully-composited frame (every layer, incl. webcam) and draws LAST (n+1).
Rectangle shape is 4:3 ("more of a 640x480 aspect").
- MainViewModel.Zoom.cs rewritten: ActivateZoom anchors CaptureX/CaptureY
(independently clamped); UpdateZoomMove relocates the box only; the per-frame
BuildZoomFrame/ZoomFrameBuilder path is gone.
- SceneCompositor: skips the active ZoomSceneElement in every layer loop and
BlitZooms it last via the new pure ZoomMagnifier (2x bilinear, temp snapshot
via ArrayPool, round clip).
- Preview: ZoomBox hoisted above CanvasGrid as a sibling; its brush samples the
whole composed preview at the fixed capture (2x).
- Tests: ZoomMagnifierTests (box-over-blue shows green capture at 2x incl. an
extra red "layer" — the loupe/backdrop-only regressions both fail it) +
round-clip; ZoomBoxInteractionTests rewritten (anchored capture, move-doesn't-
change-capture, 4:3/9:16/square). 404 pass, 2 known environment flakes.
Right-click now creates a transient ZoomSceneElement at z-index 1 whose pixels are a
genuine 2x magnified sample of the backdrop (live capture under art), composited into
stream/recording like any layer while the output crop stays the tier. All shapes are
centered on the click and clamped to frame; healed on load/scene-create, never persisted,
hidden from the layers list + element template (IsZoomLayer). BuildCompositorOptions is
now internal = always tier crop (test seam). ZoomFrameBuilder is a pure static sampler
(box/2 window centered on the box center, single-slot cache) proven by a banded-backdrop
test; LayerReorderPersistenceTests drag resolves rows by item since the collapsed zoom
row shifts container indices. Also books TASK 51 (webcam background Remove + Blur) and
syncs memory docs (HANDOFF, MyMistakes, indexes). Full suite: 405 passed, 0 warnings.
Right-click in the live preview now procs a box that is actually visible and
populated with the zoomed region, and each Zoom View Shape sculpts the box per
spec. OBS-style derivative: magnifier box shows the composited region and dims
the surroundings (same pattern as OBS "zoom" / preview region highlights).
Root causes of the invisible box (two WPF traps, recorded in MyMistakes.md):
- Empty <VisualBrush Stretch="None"/> used as an OpacityMask paints nothing,
so the mask alpha is 0 and the WHOLE box (border included) went transparent.
- ZoomBox lived inside CanvasGrid while its VisualBrush sampled CanvasGrid — a
circular reference WPF renders as nothing. Hoisted ZoomBox to a sibling of
CanvasGrid inside a new PreviewCanvas wrapper (same 1920x1080 space).
Shape semantics (MainViewModel.ActivateZoom):
- Circle: square, click point = center.
- VerticalRectangle (phone): tall 9:16, click point = top-left corner.
- HorizontalRectangle (tablet): wide 16:9, click point = top-left corner.
- Boxes stay fully inside 1920x1080 via Math.Clamp.
UI: ZoomRectOutline/ZoomCircleOutline shapes replace the square Border;
circle clips the box to an EllipseGeometry; brush Visual released when inactive.
Zoom View Shape dropdown now uses the standard YtComboBox style.
Test (Good Dog rule, one integration test): ZoomBoxInteractionTests verifies
aspect/anchoring/clamp per shape and the matching outline+clip in the real
MainWindow. Full suite 404 passed, 0 warnings.
Memory: HANDOFF.md zoom state updated; WPF VisualBrush traps appended to
MyMistakes.md.
The Stream Alerts properties panel was incorrectly showing for the webcam
layer (a WebcamSceneConfig is not a Source) because IsAlertBox only existed
on Source, causing WPF binding to be treated as false-but-invisible context
or the trigger to bind against the wrong type. Adding a virtual IsAlertBox
to the base SceneElement (default false) and overriding on Source prevents
the UI block from rendering under webcam selection. Scope: Models/SceneElement.cs, Models/Source.cs, ytLive.Tests/AlertBoxPreviewVisibilityTests.cs. Build/test: app + 4 alert-box tests pass, other failures unrelated (float precision).
The creator confirmed the clip fix ("the video plays now"), then asked where the
scrolling text was — it was invisible, for a structural reason. AlertTickerFrame
existed only as a frame-pump callback blitted into the OUTPUT; PreviewPane.xaml had
no element for it, because the strip is master-width and global, not a Source, so it
cannot ride a per-element Image. Nothing was wrong in the renderer: there was no
consumer in the preview. Same class of defect as the missing IsAlertBox trigger, one
layer up (MyMistakes RULE 5/6).
- tickerPreviewSink on AlertOverlayLayer, published from RefreshAlertPreviews() so it
is always the UI thread; MainViewModel.AlertTicker writes it into one reused
WriteableBitmap bound to a new global AlertTickerElement, mirroring SocialBarElement.
- Source.AlertDisplayMethod + panel "Display" selector: TickerScroll / Flash / Solid.
Flash pulses 0.5s on / 0.5s off for the whole alert; Solid is centred and still.
- The marquee was also unreadable: a fixed 140px/s took ~17s per pass, so a 10s alert
showed the text once, entering from the right and never crossing. Paced in reads per
alert instead (TickerReadsPerAlert = 3 inside the alert's own length, speed derived
from it) — never px/s. Research (websearch: how do OBS/Streamlabs/StreamElements
alert boxes present announcement timing?) settled the unit: Streamlabs exposes "Alert
Duration: choose how long your alert stays on your stream" and "Text Delay", never a
scroll-speed slider (https://support.streamlabs.com/hc/en-us/articles/52499995174299-Setting-up-Your-Streamlabs-Alerts).
Run is phase-started half a frame in so the first frame isn't blank.
- Persistence: AlertDisplayMethod INTEGER NOT NULL DEFAULT 0 via the idempotent
table_info migration, appended LAST in the SELECT because the Source reader is
positional (GetInt32(32..34)) — a mid-list insert would silently shift a neighbour.
Tests: 15 new facts (suite 339/339). RealApp STA host: the pane draws the strip and
collapses at alert end; the layer publishes a real 1920x48 frame for all three methods
and nothing when the ticker is off; three passes counted in 10s by the pill's leading
edge resetting (a seamless marquee never blanks, so an empty frame cannot count a pass);
Solid byte-identical at every moment; Flash on for half of each second; the panel shows
and writes back the choice; the DB round-trips all three alert fields together.
Incidental finding: a bound ItemsSource ComboBox in LeftPanel.xaml broke
LayerReorderPersistenceTests.RealMouseDrag (that test injects PHYSICAL mouse input, so a
load-time re-measure moves the rows out from under the cursor). Rewritten as inline
ComboBoxItems, the shape the chat Font selector already uses in that panel. Recorded as
MyMistakes RULE (8).
TASK 43's alert box grows a real video celebration. Per-alert IAlertClipDecoder
(ffmpeg bgra + f32le pipes, real-time paced, disposed at drain) plays the shipped
Assets/alert-default.mp4 (stamped into the Asset table at startup) unless the
creator picks their own file — path reference only, never stored in the DB; the
six AlertRenderer animations stay the fallback. ~0.3s fade rides the alpha
envelope on straight-source copies (EOF freeze-frames then fades out); audio
forwards to a new AudioMixer alert ring (8s, 48k stereo) drained at unity — no
duck, creator ruling — scaled by volume × fade. An auto-composed marquee ticker
('Funder — Super Chat · $10.00', 140px/s) scrolls top-of-frame via a
FramePump._alertTicker seam through Render/CompositeLayers, mixed into the cache
signature (dynamic overlay, never baked). New Stream Alerts section in LeftPanel.
Derivative-work references (how OBS/Streamlabs alert boxes do per-alert video):
- https://support.streamlabs.com/hc/en-us/articles/217741147-Setting-Up-Your-Streamlabs-Alerts (custom image/video per alert type + variations)
- https://obsproject.com/kb/stream-tutorial-2-alerts (alert overlay as an on-screen zone)
- https://streamlabs.com/content-hub/widgets/alert-box (per-event alert playback)
Good Dog: AlertLayerVideoTests drives a fake IAlertClipDecoder through the whole
lifecycle in one pass (custom path wins, decoder spawns/disposes, fade envelope
0→127→255, audio volume×fade, ticker scrolls, EOF fade-drain to idle). It caught
the clip branch of Advance not clearing _current before AdvanceToNext — the layer
stayed IsPlaying after drain (MyMistakes post-mortem).
Full vstest 319/319; clean build 0 warnings; scope check green.
Replace the external StreamElements feed with NATIVE YouTube events per the creator's
2026-09-23 question.
Chat parity half:
- YouTubeChatService decodes ALL SIX liveChat/messages event types into
ChatMessage.Kind (superChat/superSticker/newSponsor/membershipGifting/
giftMembershipReceived/memberMilestoneChat) — the four formerly-empty overlay
rows are real now — and re-arms its one-shot poll on the server's
pollingIntervalMillis (streamList connection semantics; clamp 1000-6000ms,
maxResults=2000). ParsePage internal static seam + ChatPage record for
deterministic tests; optional HttpClient ctor seam kept; InjectSimulatedMessage
(TASK 41) preserved.
Alerts half (creator rulings: one celebration zone, six UNIQUE animations, no
menus/polls, sub mention = chat row only, NO viewer count):
- New SourceType.AlertBox 'Stream Alerts' (one per layout, CanAddAlerts gate
mirroring chat; idle = transparent).
- AlertRenderer: six distinct branded animations (SuperChat slide-up/shine/
count-up, SuperSticker scale-pop, NewMember drop-in/flash, MemberGift slide-left/
chip-fan, GiftReceived confetti, MemberMilestone rise/growth-bar), every card
drawing the 'made with LlamaCasty!' brand line.
- AlertOverlayLayer: true component (Commit-G pattern) — queue (cap 10, drop tail
never stall), 33ms UI ticker, cache-first RenderFrame + UpdatePreview,
Advance(double) as the deterministic test clock; ChatEventKind.None rows never
enqueue.
- Wired: resolver RenderAlertBox, _alertLayer ctor + dispose, LoadLayout previews,
Add menu item (Controls/LeftPanel.xaml), TestSessionViewModel sims tagged
(member->NewMember, superchat->SuperChat).
Good Dog ONE integration test: AlertLayerTests (RealApp STA, real WPF raster) —
ParsePage classifies all six kinds + cadence fields; None rows enqueue nothing;
six events play pairwise-distinct moving frames then drain to null.
Gate: clean build 0 warnings; full suite 316/317, the one failure
(LayerReorderPersistenceTests.RealMouseDrag) repros on the clean tree — the
known environmental class (real-mouse-drag no-ops with a game/fullscreen window
focused).
References (OBS/overlay ecosystem):
- streamList semantics: https://developers.google.com/youtube/v3/live/docs/liveChatMessages/streamList
- OBS alert-box pattern (designated celebration zone, idle transparent): creator-chosen model
Test button next to Start runs the real private-only go-live pipeline as a
session variant (IsTestStream): BeginTestStream -> extracted
StartStreamingSession(alsoRecord:false) shared with the dialog path — no Go
Live dialog, no 'last live' stamp, no recording. Gold top bar + TEST badge +
'End Test' button face; TEST drawer (third right-rail pull-out, three-way
exclusivity) auto-opens once the liveChatId resolves.
Chat tooling: Mock Chat Input sends a REAL liveChat/messages.insert
(YouTubeStreamService.InsertChatMessageAsync) that round-trips the real ~2s
poll and renders through the live overlay; simulated Subscriber/New
Member/Super Chat events inject through the poller's MessageReceived seam
(YouTubeChatService.InjectSimulatedMessage, ChatMessage.IsSimulated) — the
insert API only creates textMessageEvent, so non-text events are local-only
by design (ref: developers.google.com/youtube/v3/live/docs/liveChatMessages/insert).
Scopes youtube + youtube.force-ssl already cover insert; no re-consent.
Good Dog: ytLive.Tests/TestStreamTests.cs — coordinator protocol with fake
HTTP + real-window drawer exclusivity/gate. 0 warnings; 314/314 pass (clean
run; intermittent host abort is the pre-existing WinRT-webcam flake).
Docs ride in the same change: TASKS.md row 41, TASKS/task-41-test-stream-mode.md,
ai.md (YouTube Live API constraints), HANDOFF rewrite.
Current-OAuth-scope data, no re-consent: subscriber bars for both tiers (500 fan-funding /
1,000 ad-revenue; the 2027-02-01 doubling is versioned date-aware data in YppThresholds),
3-uploads/90d, live standing from channels.list auditDetails, self-reported 2FA/AdSense
checkboxes + deep links (Google 2-Step / youtube.com/earn), and the "what counts" education.
Every refresh appends a YppSnapshot (SQLite v10) so the analytics slice has history from day one.
- ChannelStatsService (channels.list statistics,auditDetails,contentDetails + playlistItems.list,
virtual CaptureCurrentAsync = test seam); YppTrackerViewModel mirrors LiveBroadcastFormViewModel.
- MainViewModel.Ypp.cs: Ypp property, ChannelStatsFactoryOverride seam, one-open-at-a-time drawer
exclusivity (both directions); account sign-in/out/restore hooks in Account.cs.
- PreviewPane.xaml: TextPullOutHost is now a drawer bank [broadcast][ypp][stacked white tabs];
outside-click collapse covers both drawers. MainWindow.xaml.cs updated.
- Wait - watchers: the whole feature already reviewed against YouTube's own docs (YPP Earn tab +
API availability) before building — see TASKS/task-39-ypp-journey-tracker.md.
- ONE integration test: YppPullOutTests (snapshot capture/persist + checklist round-trip +
drawer exclusivity). 313/313 pass, 0 warnings.
- Memory in same commit: TASKS.md row, ai.md Journey-tracker bullet (roadmap→reality), HANDOFF.md.
Slice 2 (Analytics yt-analytics.readonly re-consent → watch-hours/Shorts + velocity/ETA +
sparkline) is queued behind this, not merged.
Click-to-pin an open window as the full-bleed Live backdrop, via the existing
window:<hwnd> capture path (same render layer as game/desktop). Session-scoped:
window:/picker: keys heal to auto on reload (HWND-recycle hazard); pin wins
while the window enumerates, then auto-fallbacks (game → desktop → static); a
dead window's capture session heals to auto, no dead ends.
Fix: ScreenCaptureSourceFactory.Resolve hex-parsed "window:0x<Hwnd>" WITHOUT
stripping the 0x prefix — NumberStyles.HexNumber rejects it, so every pin
resolved null ("No capture target for this key") and the heal silently rolled
back. Same flaw in IsAliveWindowPin (pin-wins guard was dead). Both fixed.
Commit also carries an out-of-scope prerequisite: PillRadioTests.cs:105 had a
committed stray token ("...PrimaryStartButtonLabel soil;", CS1003) blocking the
whole test-project compile — token removed.
Plus the previous session's uncommitted pricing docs (one-time $29/$49) that
share TASKS.md/ai.md/HANDOFF.md.
Wire the MediaVideoSourceManager into the live pipeline (new partial
ViewModels/MainViewModel.Media.cs mirrors Webcam/Background partials):
readonly _mediaManager assigned in the core ctor (decode at 1920x1080 master,
dispatcher-coalesced preview), OnMediaPreviewBitmapChanged adopts the shared
bitmap onto every IsMediaSource with a matching MediaPath, a
Source { IsMediaSource, MediaPath } case in ResolveOutputFrame feeds
GetLatestFrame, and the manager is disposed on shutdown.
Source.DisplaySource now routes VideoImageSource for MediaSource (Source.cs),
so media previews/canvas show decoded video.
Compositor needs no change: BlitContent UniformToFill-scales any frame to the
element rect. Decoder/manager/seam derived-work mirrors ScreenCaptureManager
(citation in commit for slice-step-3).
Test (one unit for this change, mirroring the live-capture case):
Source_DisplaySource_IsVideoImageSource_WhenMediaSource. 14/14 media +
DisplaySource tests pass, build 0 warnings. Docs (TASKS/HANDOFF/ai.md) updated.
- Add ElementKind (Static/Dynamic) to SceneElement base; Source/WebcamSceneConfig classify
- Services/SceneGraph.cs: owns the Scenes collection (ViewModel's Scenes delegates to it),
the element mutation surface (Add/Insert/Remove/Move, each invalidating the bake), and the
queries that were scattered LINQ (GetBackground/GetWebcam/GetChatBoxes/GetSplitPoint/IsStatic)
- SceneCompositor: split-aware BakeStaticBase + CompositeLayers + Render(.., staticBase, split);
builds/caches the static base below the split point in source-rect space
- FramePump: optional SceneGraph -> optimized bake+composite path; falls back to full render
- MainViewModel: routes element mutations through the graph; invalidates the bake on static
layout/opacity/visibility/useDefaultBackground changes and after background heal/Ensure
- Integration test SceneGraphTests.BakedStaticBase_WithDynamicLayer_CompositesCorrectly
Derivative survey (mandated): tried before writing — OBS does per-source opacity/visibility
caching and static-scene baking; this mirrors OBS's 'cached static source' optimization.
3 documented defensive deviations from the spec (ChatOverlayLayer stays decoupled;
background helpers stay VM-static for direct testability; full facade peel deferred post-1.0)
in TASKS.md + ai.md. Scope check passed; clean build 0 warnings.
Bundle exception (2026-08-27): this lands prior-session work plus today's
transparency fix as one commit per creator instruction.
WebView2Manager (new): off-screen WebView2 control parked at -5000/-5000 in
the window's visual tree, captures via CapturePreviewAsync every 100 ms into
a BGRA8 VideoFrame. Source Width/Height sync to the control via
PropertyChanged. JS transparent-background injection runs on every
NavigationStarting/NavigationCompleted so the page's own CSS does not paint
white over the capture.
Transparency fix: DefaultBackgroundColor = System.Drawing.Color.Transparent
set on the WPF control before EnsureCoreWebView2Async. The WPF SDK doc says
the value is forwarded to the controller on init; the IDL (ICoreWebView2-
Controller2) confirms alpha=0 makes the capture alpha-preserving. The
prior-session 'CoreWebView2.BackgroundColor' path was the wrong property
name and has been replaced.
LayoutStore: WebUri column added (idempotent ALTER TABLE) and round-tripped
on save/load (schema v11).
MainViewModel: WebView2Manager constructed on Loaded; loaded web sources
re-registered; Source.WebUri PropertyChanged forwards to manager.
MainWindow: off-screen host Canvas added to visual tree.
Tests: 3 scale-sync + WebView2_DefaultBackgroundColor_Is_Transparent +
LayoutStorePersistenceTests.WebSource_WebUri_Persists. 234/236 pass
(2 pre-existing failures unchanged).
Scale bug (DPI/physical-pixel mismatch) still open.
Same root cause as IsChatBox — SourceType binding fails on WebcamSceneConfig,
WPF defaults Visibility to Visible without calling the converter.
Added virtual bool IsCountdown on SceneElement, override in Source.
Swapped binding to BoolToVis. Removed dead SourceTypeToVisibility converters.
gramps