Reported as "the default video and the green screen video are playing at a hideously slow
rate… I thought the playback timing issues were resolved?!" They were not: two independent
faults, both in the shared clip pipe.
1. QUADRATIC COPY IN THE FRAME READER. `RawVideoFrameReader` re-concatenated the whole pending
buffer on every `Feed`, and the pipe feeds it 64 KB at a time. A 1080p BGRA frame is 8 MB, so
one frame cost ~127 copies of a growing buffer — roughly half a gigabyte of memcpy per frame.
Measured on a 30 fps clip: 6 frames in 3 seconds (2 fps). The reader now fills one preallocated
frame buffer and hands that array to the VideoFrame, so a frame is copied exactly once. Pipe
reads are 256 KB. Same clip: 29 fps.
2. PACING SLEPT ON TOP OF THE WORK. A fixed 1/fps sleep after each frame adds the frame's own
cost, so 20 ms of work on a 30 fps clip yields 1/(33+20) ≈ 19 fps — measured 20.9. Pacing is
now deadline-based (`Helpers/FramePacer.cs`): wait only what is left of the frame's interval,
resync when a frame overruns instead of bursting, never sleep longer than one interval.
The alert clip shares this pipe, so it gained both fixes.
Tests: `FramePacerTests` (subtract work, no drift, late → resync, zero duration, reset);
`ChromaKeyRealClipTests.RealClip_PlaysAtItsNativeRate` (throughput floor of 15 fps on the real
30 fps clip — the old code sat at 2); the two pacing assertions now check "at most one interval"
rather than an exact sleep, which is what deadline pacing means. Full suite: 574 passed,
0 failed, clean build.
The creator's test_greenscreen_moving_subject.mp4 (1920x1080, 5s, subject moving over a
green field) is what exposed the detector's brightness ceiling and proved the key colour must
come from the measured screen.
Development-only by construction, not by convention: ytLive.csproj lists Assets as explicit
<Resource Include> entries with no Assets/** glob, so a file that is not on that list is never
compiled in, copied to output, or published. The test project links this one path into its own
Fixtures output, so the repo holds ONE copy (23 KB).
Three reports from the creator, plus two bugs the real clip exposed.
1. A video layer was INVISIBLE in the preview. The pane's per-layer Image is Collapsed by
default and switched on by a whitelist of DataTriggers; MediaSource matched none, so the clip
decoded into a bitmap that nothing displayed. Same defect the alert box hit on 2026-09-26 and
the scoreboard after it — now recorded at the top of docs/ai/ui-surface.md with a test that
asserts the bound Image is Visible (`MediaPreviewDisplayTests`).
2. Play is no longer tied to Loop: the button is always enabled (creator ruling — Loop must not
toggle Play). Loop still restarts a finished clip, which is the behaviour that was broken.
3. Geometry is now the LAST section of the properties list for every draggable element, with
opacity at the top; the web source's duplicate geometry block is gone (it now uses the shared
one, which had been sitting above the media panel).
4. The physical mouse-drag test is deleted. It injected real cursor movement, hijacked whatever
machine ran it, and failed whenever the desktop was busy. The arithmetic it covered now lives
in `Helpers/DragReorderMath.cs` — pure, and covered by `DragReorderMathTests` (threshold,
up/down moves, no-op and out-of-range). The two persistence tests were already synthetic.
5. Real-clip check (creator's `test_greenscreen_moving_subject.mp4`, 1920×1080): the detector
REJECTED it — a fully saturated green sits at value 1.0 and the detector's 0.98 brightness
ceiling threw it away. White highlights are excluded by the saturation floor, which is the
property that actually separates them, so the ceiling is gone. With it fixed, the clip is
detected as green (high confidence), and keyed through our own pipe 97.8% of pixels go
transparent. Measured: keying with the canonical #00B140 keys 0.0% of this clip — which is why
the key colour comes from the measured screen.
Tests: 567 passed, 0 failed, clean build 0 warnings. The gate's scope check flags
`Assets/Videos/test_greenscreen_moving_subject.mp4` — the creator's working copy, deliberately not
committed; the fixture lives under ytLive.Tests/Fixtures.
Reported 2026-11-05: "when I click Loop, the video doesn't play in the preview pane". Two
causes, both real:
- `VideoClipPipe.StartAsync` bailed out once it had run once (`_run != null`), so a clip that
reached EOF could never be started again — it held its last frame forever.
- Loop is only consulted at end-of-file by a LIVE decoder, so flipping it on a finished clip
did nothing at all.
Now: the pipe reports running state and is restartable after a natural end; the manager marks a
session finished (keeping its last frame) and exposes `IsRunning`/`RestartAsync`; the layer shows
`IsMediaRunning`/`IsMediaFinished`; flipping Loop on a finished clip restarts it.
UI: `▶ Play` sits to the right of the **Video File** label and is enabled only while Loop is off
(creator ruling: with Loop on the clip already runs continuously, so there is nothing to start).
The panel says "Clip finished — holding the last frame." so a frozen picture explains itself.
Also: verify.sh no longer runs physical-input tests by default. That test moves the real cursor
(SetCursorPos + mouse_event); running it mid-gate hijacks the machine someone is using, which is
exactly how it felt. Opt in with PHYSICAL_TESTS=1 when the desktop is idle; the header documents
the scoped-run command for working hours.
Test: `MediaPlaybackRestartTests` (pipe restart, finished state, Play again, Loop-on-finished).
8 scoped tests green. FULL SUITE NOT RUN — the machine was in use; run scripts/verify.sh in a
quiet window before the next milestone.
TASK 32·4. A plain MP4 keeps its index (moov) at the end, so a power cut or a killed
process left the entire recording unreadable even though every video byte was on disk.
The record block now carries
`-movflags +frag_keyframe+empty_moov+default_base_moof`: index first, a playable
fragment flushed at every keyframe, so an interrupted take plays to the last fragment.
Record block only — the FLV stream output has no index and never gets the flags.
Rename-on-stop is untouched.
Test: `Args_RecordBlock_IsFragmentedMp4_SoACrashKeepsTheFile` asserts the flags on the
record block and their absence from the streaming block.
Not yet proven on a real interrupted take (kill ffmpeg mid-recording, play the result);
the args test is by construction.
Docs: task-32 slice 4 ticked with that caveat, TASKS row, output.md record note, HANDOFF.
verify.sh: 550 passed (mouse-injection test excluded, desktop in use), 0 warnings.
TASK 49 is retired (creator ruling): YouTube owns chat moderation. Its blocked-words filter and
hold-for-review run upstream of `liveChatMessages.list` — held messages are never returned
(https://stackoverflow.com/questions/74511524/) — so a second local list would duplicate a switch
the creator already owns, with a second set of false positives and a second support surface.
What we actually owed the platform, and had wrong:
- The parser added every item to the overlay. A deleted message arrives as a `tombstone` carrying
no text at all ("it has since been deleted … only liveChatId, type and publishedAt are present" —
https://developers.google.com/youtube/data/live/reference/rest/v3/liveChatMessages), so every
deletion rendered as a BLANK chat row. `hasDisplayContent:false` messages and chat-mode events
did the same.
- Deletion events (`messageDeletedEvent`/`messageRetractedEvent`/`userBannedEvent`) are documented
but have not been delivered to clients for years (https://stackoverflow.com/questions/44346893/),
so nothing is built on them; they are skipped if they ever arrive.
- Found while testing: Super Chat read `displayString`, but YouTube's field is `amountDisplayString`
— every amount silently fell back to a recomposed string, which mangles non-dollar locales. The
model's own comment said this was the reason the field exists.
Test: `ChatModerationParseTests` — tombstone, no-display-content, chat-mode events all produce no
row; a real Super Chat still parses its pre-rendered amount (constraint 4: reward fields are never
reinterpreted).
Docs: TASK 49 marked retired with the citations, the rule recorded in decisions.md, HANDOFF updated.
verify.sh: 550 passed, 0 failed, 0 warnings.
TASK 64 slice F — the two things left after the feature worked by hand.
- App Settings → **Video clips → Auto Green/Blue Screen** (off by default). When on, a
high-confidence detected screen is keyed as soon as the clip is added; the panel says
"Removed automatically" so an automatic change is never silent. Medium confidence still
asks, low says nothing — a wrong automatic key eats the picture.
- **A clip is a clip:** the alert box's own replacement clip keys through the same settings
block (one alert box per layout, so its settings are the ones the next alert uses), and
choosing an alert clip runs the same detector. The Green/Blue Screen panel now appears for
a video layer *or* an alert box with a custom clip (`Source.ShowsChromaKey`).
- Spill ships as the creator-facing **Fringe** switch; nothing further to tune behind it.
Test: `ChromaKeyApplyTests` gains the auto-apply case (no click, still explicit in the panel)
and an alert-clip case (its pipe asks ffmpeg for colorkey+despill with the blue screen type).
Docs: TASK 64 complete in TASKS.md, known limits recorded in the task file, HANDOFF rewritten.
verify.sh: 546 passed, 0 failed, 0 warnings.
TASK 64 slices D and E: the feature is usable end to end.
- Add a video file → one frame is probed (new `IChromaProbe`/`FfmpegChromaProbe`, one ffmpeg
pass at 160x90, off the UI thread) and the layer gets an offer: "Looks like a green screen —
Remove it", with the measured colour as a swatch.
- Accepting it turns the offer into settings (Amount / Softness / Fringe) that reach ffmpeg as
`colorkey` + `despill` + `format=bgra`, so the key is computed in the pipe and both consumers
(the shared preview bitmap and the compositor's frame) carry the same alpha.
- Media sessions are now keyed by **path + look** (`MainViewModel.MediaSessionKey`), so two
layers with the same settings still share one decoder, and changing the look releases the old
session and starts the new one. Removal, load reconciliation, loop and audio settings all move
to the same key.
- Settings persist on the `Source` row (six ALTER TABLE guards + SELECT/INSERT), so a keyed layer
comes back keyed.
- Panel section is plain creator words: Green/Blue Screen, Amount, Softness, Fringe.
Test: `ChromaKeyApplyTests` — the pipe asks ffmpeg to key (and does not when off); a green-screen
clip is offered, accepting it starts a keyed session, the layer's resolver then reads that session
rather than the old one; the setting survives a save.
Docs: TASK 64 D/E ticked with slice F (auto-apply setting + alert clips) left open; frame-pipeline
records the decode-option design; HANDOFF rewritten. verify.sh: 544 passed, 0 failed, 0 warnings.
TASK 64 units B and C — the two pure halves, no wiring yet.
- `Services/ChromaKeyDetector.cs`: samples the frame's outer ring (the screen is at the
edges, the subject in the middle), reports Green/Blue/None plus the colour actually shot
and a confidence. Confidence is coverage × hue tightness, which is what keeps a lawn or
a football pitch from being offered as a keyable screen. Letterbox bars are excluded from
the denominator rather than counted against the screen. Never decides anything: an offer
is the creator's to accept.
- `Services/VideoFilterChain.cs`: options → `-vf` (scale → colorkey → despill → format=bgra)
plus a `Signature` so two layers keyed identically can share one decoder. Numbers clamp and
an unparseable colour falls back to the app default, so ffmpeg is never handed a filter it
rejects at spawn.
- Keying is done by the bundled ffmpeg, not by us: verified against the shipped binary that
`colorkey=…,format=bgra` emits straight-alpha BGRA (alpha 0 on keyed pixels), which is what
the compositor already blends. No per-pixel loop lands in the 16.67 ms render budget.
Test: `ChromaKeyDetectorTests` — green, blue, letterboxed, lawn (must say None), mixed scene,
dark frame, plus the chain strings and signature sharing.
Docs: TASK 64 queued in TASKS.md with its slice table; the decisions.md chroma-key reversal
recorded as a reversal (it was buried for webcam background removal, not for supplied clips).
A video file was picture-only: the decode pipe passed `-an`, so a starting-soon
or BRB clip with music played silent everywhere. Adds sound to every clip and
collapses the two decoders into one.
- `Services/VideoClipPipe.cs`: the shared pipe behind `MediaVideoSource` (TASK 21)
and `AlertClipDecoder` (TASK 47) — video (`rawvideo bgra`, scaled) + audio
(`f32le -ac 2 -ar 48000`, 50 ms chunks, byte-carry across reads), both paced to
real time, loop restarts both so picture and sound stay together. Alert
behaviour is unchanged.
- `MediaVideoSourceManager` applies the layer's Level/Mute per session and raises
`AudioAvailable`; `MainViewModel` feeds it to the new
`AudioMixer.EnqueueDesktopMediaAudio`, which joins the DESKTOP/GAME ring so the
desktop fader and the mic auto-ducker apply exactly as they do for game audio
and TRAX (creator ruling 2026-11-05: audio joins the group).
- Per-layer `MediaMuted` + existing `MediaVolume` surfaced as Mute/Level in the
properties panel; `MediaMuted` persisted (ALTER TABLE guard + SELECT/INSERT).
- Level/mute are per SESSION because one decoder is shared per file path — the
last layer touched wins; one decoder per layer would play the file twice.
Test: `MediaSourceAudioTests` — the pipe emits 50 ms chunks at 48k stereo, the
manager scales by level and drops when muted, and a media layer's sound moves the
desktop meter. Alert/decode suites unchanged and green.
Docs: task-21 closed on item 10, the "silent soundtrack" facts corrected in
frame-pipeline/output/overlays, HANDOFF rewritten. verify.sh green (529 passed;
the two documented pre-existing failures only).
TASK 21's picker slice: the decoder, manager, pacing and loop mechanism were
already shipped but nothing ever acquired a session, so a media Source rendered
nothing. Adds "Video File" to the (+) menu (video-filtered OpenFileDialog),
one decode session per distinct path with a HasSession guard, release when the
last scene reference goes, and a post-load reconcile. Loop is a manager-level
per-path answer ("any live reference loops") applied before StartAsync and
updated live via SetLooping. Properties panel shows the file with Change… and
Loop. Volume stays unwired: media audio rides the desktop loopback, TRAX-style.
Reference: OBS's media source (file → decode → composite into the scene) is the
established answer for this feature; the lifecycle shape mirrors this repo's
WebView2/ScreenCapture registration rather than inventing a new one.
Test: ytLive.Tests/MediaSourceAcquisitionTests.cs — add starts one decoder and
frames reach the layer, loop flip reaches the decoder, remove stops it.
Docs: task-21 closed, TASKS row + Day-4 row + stale 3·17 row corrected,
frame-pipeline acquisition note, HANDOFF rewritten. verify.sh green.
The four llamacasty-* files were source exports, not assets: shipped art is
embedded via <Resource> in ytLive.csproj and read through pack: URIs, and the
Store tiles derive from Assets/llamacasty-logo.jpg. None of the four appears in
the csproj, any XAML Source/Icon, or a script, so they were dead weight that
kept resurfacing as untracked noise.
MyMistakes.md gains the recipe (csproj list + grep = 30-second verdict) so a
loose file in Assets/ is never re-litigated; HANDOFF drops the stale note.
Put size and color on one row, place emphasis labels before their toggles, and split the remaining font families into handwriting, symbols, and international groups while omitting legacy dingbat fonts. Text-layer properties follow the existing hierarchical layout and palette conventions.
Use category-filtered font and selected-item dropdowns, separate horizontal and vertical alignment, and reuse the border-color palette templates for text color. Persist vertical alignment additively. Follow the established static text-source pattern: https://obsproject.com/kb/text-sources
Raster static text on UI-thread changes and reuse the same transparent BGRA frame in preview and all compositor paths. Cache text frame identity in the frame-pump signature and invalidate static bakes on edits. Follow OBS text-source conventions: https://obsproject.com/kb/text-sources
TextOverlay layers now have a multiline editor, Windows font and size controls, color/emphasis/alignment settings, and a visible draggable preview. Text sources follow OBS's static text-source conventions: https://obsproject.com/kb/text-sources
Add additive defaults and round-trip tests for per-layer text content and formatting. Model the static text source after OBS text-source conventions: https://obsproject.com/kb/text-sources
The frame pump now submits crop-sized BGRA frames; FFmpeg scales them to final tier dimensions. Bundled scaler benchmark: 300 608x1080 to 1080x1920 frames in 0.435s (scaler-only).
Reference: https://ffmpeg.org/ffmpeg-filters.html#scale-1
Add independent AppLog message types and explicit Class 1/2 severity. Wrap and color log rows, pin Class 1 above Class 2, and let acknowledgement return entries to the current-launch timeline without changing file format or rotation.
Ref: https://logtape.org/manual/levels
Add Live Chat and Logs tabs to the non-edit left panel. Expose a bounded process-local AppLog feed so the newest messages appear first without importing earlier startup.log contents or changing file logging.
Ref: https://obsproject.com/forum/resources/understanding-obs-studio-log.473
Model the AlertBox and standalone ticker with shared settings; scene tickers render the in-memory active and queued events without saving history. Keep AlertBox content active-event-only.
Ref: https://obsproject.com/kb/obs-studio-overview
Keep non-owner resolution choices visible but muted. Selecting one preserves the free tier and opens About; external navigation is only the explicit llamacasty.com link. Ref: https://streamlabs.com/desktop
The earlier pass checked wiring only; this is the typography sweep. Raw Foreground/FontSize
labels are gone from the elements panel:
- Opacity, Timer (minutes) and URI are headings above their control (PropertyHeader), with the
control row on the panel's 10px indent — the same shape as Border Thickness/Opacity.
- Scroll speed, scoreboard Opacity/Text size and their value readouts are PropertyFieldLabel.
- The drag hint and the scoreboard sign-in note are PropertyHint.
- Simulate (dev) keeps its orange, gains the field-label typography.
- Edge, Text colour and Background were PropertySubHeader/SubHeader: ONE heading rank now, so
PropertySubHeader and the legacy SubHeader are deleted from Themes/Controls.xaml.
- DeveloperPanel — the last panel with raw typography and an unstyled CheckBox — now uses the
same styles, and PropertiesStyleTests accepts PropertyPillCheck (the guard went stale when
every check box became a pill switch). 18 tests pass; Release 0 warnings.
Their rank is carried by size and colour, not by an indent — so Video, Sound byte and Ticker all
line up on the left edge exactly like each other, and only the controls under them tab in.
The brand exemption for the universal blur put a BrandLogoOverlay above the blur host while the
canvas ItemsControl kept drawing the same element, so two logos sat on top of each other.
- The canvas presenter for a brand logo is collapsed: BrandLogoOverlay is the only render, and it
now carries the element's Opacity so the canvas copy is not missed.
- Hit-testing follows the eye: a click inside the logo's bounds selects the logo, because it is the
topmost layer in the compositor too. Without that you saw the logo on top and grabbed the webcam
underneath it.
- SelectedLayerPreviewHitTestingTests updated to the new contract (collapsed presenter, logo wins
its bounds, list selection still works). 3 tests pass; Release 0 warnings.
The preview draws two background images — BackgroundImage and, above it, ActiveBackgroundImage
(the static art) — while the mini-pane reads the scene snapshot. The default-restore path only
called UpdateBackgroundImage, so the thumbnails updated and the preview did not.
It now calls UpdateActiveBackground as well.
Also adds the generic cure behind the Background bug: OnSelectedElementPropertyChanged invalidates
the scene bake for ANY property change. A static layer's pixels are cached by element identity, so
a property edit without invalidation repaints nothing and the control looks dead — the failure was
never specific to UseDefaultBackground, only first noticed there.
Background + thumbnail tests pass (21); Release 0 warnings.
Browse… writes the chosen picture into BOTH CustomBackgroundPath and AssetId, and the default
stamp bails when AssetId is already set. So flipping "Use default background" back on changed a
bool while the preview kept showing the custom image — it looked like the switch did nothing.
Turning the default on now clears the custom pointer and the asset, re-runs
StampDefaultBackgroundAsset for the scene's shipped art, and only then invalidates the bake,
updates the preview and refreshes thumbnails.
BackgroundTests pass (17); Release 0 warnings.
Review findings from a screenshot of the Stream Alerts panel, each addressed:
- "Reset to built-in" and "Browse…" were YtButton-derived (white, semi-bold, 13px), so a reset
action outranked the section header. Property-panel actions now use PropertyButton: bordered,
11px, normal weight, OnSurface text.
- Explanation text and field labels were the same muted blue-gray. PropertyHint is now
OnSurfaceDisabled, one clear step below a label.
- Groups inside a category ran together. PropertyDivider (1px OutlineVariant) separates Video,
Sound byte and Message ticker.
- The disabled loop switch was near-invisible. Disabled now keeps the label at OnSurfaceVariant
and dims the whole control to 0.55 — readable, obviously inactive.
- Switch "on" was full-strength accent, shouting about static state. The track now sits at 0.6
opacity when on, which also stops it competing with the slider's accent fill.
No new palette entries: every change uses an existing token, so DESIGN.md stays the one colour
source. Release 0 warnings; token and typography tests pass.
Creator directive 2026-11-01: the properties panels had 14 hand-rolled heading styles, 37
hand-rolled labels, four literal grey hex values, and 14 square checkboxes.
- PropertyHeader / PropertySubHeader / PropertyFieldLabel / PropertyHint in Themes/Controls.xaml
now carry the whole hierarchy: category bright and 11px, labels and hints dim, size and weight
doing the level. Colour groups the panel — bright for what you edit, dim for its labels and
help — and no new palette entry was needed; DESIGN.md stays the only colour source.
- Every checkbox in the panel is a pill switch (PropertyPillCheck, 32x16 animated thumb).
IsChecked semantics unchanged, so no binding moved.
- Literal #888/#666/#555 became OnSurfaceVariant / OnSurfaceDisabled.
- 13 headings, 2 sub-headers and 31 in-row labels now reference a style instead of repeating
colour + size + alignment inline.
Controls audited for backing: every Button/Slider/ComboBox/CheckBox/ToggleButton/TextBox in the
panel has a Command or Click, a Value binding, an ItemsSource or Selected*, IsChecked, or Text —
no dead controls. Release 0 warnings; typography and token tests pass.
New `youTubeTrainingVideos.md`: the feature list worth filming, split into "ready now" and
"after the surge lands" so nothing gets filmed before it exists, plus the format decisions
settled on 2026-11-01.
Format: 16:9 long-form is the library (search intent, walkthroughs, conversion); vertical Shorts
are trailers cut from the same pass. A 16:9 video cannot be a Short, so it is a per-video choice.
TikTok is a mirror of the verticals, never a strategy.
The numbers behind it: Shorts need 1,000 subs + 10M views in 90 days for YPP versus 4,000 watch
hours in a year; Shorts RPM is $0.02-0.08 per 1,000 against $3-8 for tutorials; and one $79 sale
nets ~$55.30, which is what 700k-2M Shorts views pay. Shorts are an install engine, not revenue.
Film first: privacy blur, auto-ducking, webcam blur.
Creator ruling 2026-11-01. One SKU, one price, Steam does the selling.
- Pro is a one-time Steam DLC on the free app: $79 introductory, $99 on a stated date, announced
where the price is shown and actually raised.
- The subscription is retired. The reasoning is in decisions.md: no service behind a monthly fee
(no servers, no cloud, no content), ~1-3 subscribers per 1,000 installs against 5-8% churn, and
it carried the most expensive code in the product.
- Polar goes dormant. Its customer-portal design is recorded, not built. The "freemium on Steam,
convert on Polar, Valve gets nothing" proposal is rejected: in-app purchases must use the Steam
Wallet, so it risks the listing to save ~$24 a sale.
- Entitlement collapses to `steamDlcOwned`. No lease, no key, no portal, no device limit; the
greyed tier opens the Steam store overlay, so every purchase stays inside Valve's own surface.
- The site publishes the model and links the store page. It takes no payment and hosts no binaries.
- The $400 lifetime died with the subscription it anchored. Founding 200 died with the coupons and
passes it needed.
Costs: $115 fixed year one; $79 nets $55.30 after Steam, so three sales cover the year.
Mic and desktop gains run -60 to 0 dB and that is the ceiling: 0 dB is full input level, and
nothing past it is offered or drawn. The unity tick is gone with the zone it explained.
The faders run -60 to +6 dB but the ladder tops out at 0 dBFS, so the last 6 dB looked like
dead track. The tick marks unity at 60/66 of the track: what is left of it is boost, and now it
reads that way. Both mic and desktop faders; the lip-sync slider is milliseconds and gets none.
Creator request: a sound-byte browse + label under Built-in video, with an option to loop the
sound while the clip plays. The video itself is always one pass to completion.
- Source gains AlertAudioPath and AlertAudioLoop, persisted (column + migration + INSERT +
SELECT + reader, the whole chain — that chain is where the blur crashed once).
- The sound byte plays through MediaPlayer on the default output device; MediaEnded re-seeks to
zero while looping, and StopClip kills it so a tail cannot bleed into the next alert.
- The clip's OWN soundtrack moved off the mixer and onto the device as well
(Services/Audio/AlertAudioOutput: one WaveOutEvent + buffered float provider).
Why the move: the creator asked that alert audio — the clip's track or the added sound byte —
appear in the desktop sound bar. Only audio that reaches the default device is picked up by the
WASAPI loopback that feeds both the meter and the stream. The old EnqueueAlertAudio route put the
sound in the stream but left the meter flat and the room silent.
Tests: the sound byte and its loop flag round-trip through SQLite, and a fresh alert layer starts
with no sound byte and no loop. Release 0 warnings.
TestAlert called Enqueue, which is the pure test seam: it fills the queue and returns. The
alert layer needs three more things to show anything — its scene list, the playback ticker
running, and the preview refreshed — and all three live in OnMessageReceived, the same entry
the chat feed uses (MainViewModel.Chat.cs).
Now it calls OnMessageReceived(message, Scenes), so the clip advances on the ticker and writes
frames to the box's VideoImageSource, which is what the preview pane displays.
Sits to the right of the Built-in video pill, labelled "Test alert". It enqueues one synthetic
Super Chat through the real AlertOverlayLayer, so what plays is exactly what a viewer triggers —
the custom clip when one is set, the built-in clip otherwise — and it goes through the same
output path (preview and encoder) as a live alert. Local only: nothing reaches YouTube and no
chat row is invented.
MIC's device name was the only header label at full-strength OnSurface (it was brightened
because it shows a choice), and the lip-sync reading was Tertiary — three different values
across four bays in the same row. All four header labels are now Brush.OnSurfaceVariant, the
standard secondary-text token. No other colours touched.
Every bay is now header / ladder / controls. Lip-sync has no ladder, so it holds an empty 20px
row (10px meter + the two margins) that keeps its slider exactly level with the other three,
and MIC's ladder gained the missing 4px bottom margin that had its slider sitting 4px high.
Presets stay under the slider in the narrow lip-sync bay.
Not under it: the offset slider now rides the header line beside the LIP-SYNC badge and the
reading, and the preset row is what stays below. The box is narrow, so a slider on its own line
was the only thing making it two-and-a-bit rows tall.
GenerateBuildStamp read BuildCounter.txt, added 1 and wrote it back on every CoreCompile, so
the number tracked BUILDS: a day of iteration reached #1122 against 563 commits. It now uses
git rev-list count of HEAD, which is what the comment always claimed (and why the file existed
in .gitignore). No counter file, no drift; a missing git still falls back to the start.
Also moves the MIC and lip-sync volume bars up one line: both were pinned to the floor of their
bay by a star row plus VerticalAlignment=Bottom. They now sit directly under their headers,
with the auto rows sized to content.
Capping the three bay meters at 320px and left-aligning them made each ladder look cut off
mid-bay, which is what the creator saw as deleted bars. The caps are gone; the master ladder
keeps its own 420-900px range so it stays the longest without shortening anything else.
The master meter was a fixed 420px, but each sound bay's ladder fills its column — on a wide
window a bay could be longer than the master, which is the opposite of what was asked.
Master now stretches between 420 and 760 px, and the three bay ladders cap at 320 with the same
cap for each, so they stay the same relative size to one another and stay shorter than the
master at every window width.
Creator rulings, 2026-11-01.
- Master strip is 44px (from 36) and its meter is now the largest on screen: 420x14 with 32
segments, centred under the preview, with a 12px MASTER label — bigger than the 9px bay
labels. L/R imbalance is a flag on the left, MONO and the session clock on the right.
- The kbps / fps / dropped counters are gone from that line: the live readouts already sit
above the preview, and the duplicate was noise rather than telemetry.
- TRAX is its own bay (MIC | GAME | TRAX | LIP-SYNC) with its own meter bound to
TraxMeterFraction. It lived inside the game bay with no ladder, which meant whether the bed
was actually playing could not be answered from the dock — and the player already measures
its own output.
- Lip-sync is narrow (0.45 star) since it is one slider and three presets; the three sound bays
are equal width, so their meters keep the same relative size.
AudioDockLayout moves with it (156 = 112 + 44; collapsed 44) and the layout test is updated.
TraxBayTests now asserts the opposite of the old ruling: the bay HAS a meter, and the game bay
no longer carries it.
The blur is universal, so it would swallow the logo along with everything else. The compositor
now defers every visible brand logo: skipped in both element loops, blitted immediately AFTER
the blur group, before the flash/social/ticker overlays. One logo per scene, so it is cheap.
Preview mirrors it: the staged scene's brand logo is drawn above the blur host (StagedBrandLogo),
so what you see in the editor is what the encoder gets.
Test: a blur covering the logo's area leaves the logo's pixels exactly white while the coloured
background beneath it blends.
The creator found the use case that reframes the feature: a moment of privacy while the webcam is
on. A blur that can only cover the desktop cannot do that.
- SceneCompositor applies the blur group AFTER every element is composited (still before the
flash / social bar / ticker / zoom overlays), so it covers webcam, chat, alerts — anything. Its
position in the layer list no longer affects the output, so it is added at the top and the
reorder clamp is gone.
- Supersedes the earlier "blur sits below the brand" rule: a universal blur does obscure the logo
when it covers it. Called out in frame-pipeline.md so it is not re-litigated.
- Preview mirrors it exactly: the blur host moved OUT of CanvasGrid to a sibling above it, so the
VisualBrush samples every layer (and cannot sample itself). It used to sample only the backdrop,
which is why a circle over the webcam would have shown sharp pixels in the editor and blurred
ones in the stream.
Two holes in the blur's property panel, both of which also affected other layers:
- X/Y/W/H were gated on IsWebcamSelected, so a blur (or an image, chat box or alert zone)
had no numeric position or size at all — only dragging. The block is generic: it always
edited SelectedElement's own values, so the gate was the only thing excluding them.
- Opacity showed for a blur, but the compositor's blur reads BlurAmount — the slider would
have moved a number that changes nothing in the output. Hidden for blur layers.
Blur panel is now: Box | Circle, strength, and the shared geometry fields.
The Blur item's Visibility is bound to CanAddBlur, which depends on the staged scene. The scene
setter never raised it, so the binding evaluated once (collapsed) and stayed collapsed for the
session — build 1082: the option simply wasn't there.
StagedScene now notifies CanAddBlur, with a test that pins both halves: Live true, Chat false,
and a notification on every staged-scene change.
Source.IsDraggable listed Image/Web/Chat/Alert only, so a blur had no selection box, no corner
handle, and no hit-test — the rectangle existed in the render but could not be grabbed. Adding
Blur to that list gives it the same selection chrome and resize path every placeable layer has
(drag to move, corner dot to resize, one undo snapshot per gesture).
It is selected on add (AddSource already does that), so the rectangle appears already outlined
and ready to size.
The preview canvas is WPF visuals; a blur layer contributes no visual of its own, so until now
the creator saw nothing where the blur was and could not tell what it was hiding.
Each visible blur now draws a rectangle (or ellipse) filled with a VisualBrush of the whole
BackdropLayer — the desktop capture plus the background art — sampled at the blur's own rect and
carrying a BlurEffect at the same strength the compositor uses. The host canvas sits after the
backdrop and before the element layers, which is the model's own z-rule, so the preview shows
exactly what the output will: desktop blurred, brand and everything above it untouched.
Rebuilt on scene change, on add/remove, and on any blur property change (position, size, shape,
strength) — the brush samples the live backdrop, so the picture keeps moving underneath.
LayoutStore.Load threw ArgumentOutOfRangeException on GetOrdinal("BlurAmount") during the
MainViewModel constructor, so the app died at startup rather than when a blur was used. The
migration adds the column and Save writes it; the reading query still listed its columns
explicitly and BlurAmount was missing from that list.
Adds LayoutBlurPersistenceTests: a blur saved and reloaded, asserting the amount and geometry
survive. That is the test that should have existed with the feature — the startup path it
covers has no other guard.
Creator request 2026-11-01: a layer that hides part of the desktop from viewers. Box or circle,
drag/resize like any layer, one strength slider, several allowed.
**Z-order is policy, not preference.** `AddSource` inserts a blur directly above the background
and therefore below the brand logo, and `OnSceneElementsReordered` pushes any blur that ends up
above the brand back down. Nothing else in the app can move it into the brand's way.
**Overlap = the strongest single blur, never a stack.** `SceneCompositor.ApplyBlurLayers` collects
every visible blur the first time one is reached in the z-order, sorts them strongest-first, and
shares one coverage map: a pixel already covered by a stronger blur is skipped. Blurring
back-to-front would have produced something stronger than any slider setting allows, which is
exactly what was ruled out.
**One blur curve, shared with the webcam.** `RegionBlur` carries the constants the webcam blur
already used — downscale 4, radius 1–6 downscaled px, `RadiusFor(strength)` — and
`BackgroundEffectProcessor` now delegates to it instead of holding its own copy. The layer's
slider is the same 0–1 scale with the same 0.5 default, so "half strength" means the same blur in
both features. Cost is proportional to the blur's own rect, not the frame.
**Live scene only**, enforced in `AddSource` as well as the (+) menu (`CanAddBlur`), so a stale
menu item or a scripted call cannot plant one on BRB. `ElementKind.Dynamic`, so it is never baked
into the static base and every render path gets it — pump, preview, thumbnails, scene dump.
Persistence: `Source.BlurAmount` column + migration; shape rides the existing `ClipShape`.
Properties panel: Box | Circle plus the strength slider, gated on `IsBlurSelected`.
4 tests: outside the mask is byte-identical, inside loses its hard edges, a circle leaves its
box corners alone, and two identical stacked blurs equal one (the coverage map). Release builds
at 0 warnings.
The five drawers each sized their content Grid to Width=320 inside a panel that itself
animates to 320, with 14px margins — so the content box was 348 wide in a 320 window and its
right edge was clipped. That is why every drawer's content jammed into the right margin
regardless of the margin value.
The Grid now fills the panel (no fixed width) with Margin 14,10,20,12: 14 on the left, 20
between the content and the right edge of the div, which is the requested gutter.
Two build-1047 notes. The settings content gets a 20px right margin (plus 4 left) inside the
scroll viewer, so text and controls stop running into the panel edge and the scrollbar has
somewhere to live. The rail tab stack is VerticalAlignment=Center instead of Stretch, so the
whole group of tabs sits centred against the preview rather than hanging from the top.
Creator directive, 2026-11-01. Settings stopped being a centred modal.
- **Drawer** (Controls/SettingsDrawer): hosted in PreviewPane's pull-out stack, 320px, the same
animated-width pattern as Stream Settings / YPP / Socials / TEST, opened by the gear rail tab
on a single left click. SettingsDrawerOpen is exclusive with the other four, both directions.
This also removes the modal's MaxHeight-700 scroll problem for good: the drawer is the height
of the preview.
- **Categories**: headings with controls indented beneath them. Zoom now owns *Zoom view shape*
(Circle / Phone / Tablet) and *Zoom box follows*; Recordings, Brand logo and Scene transition
are their own categories.
- **The app menu moved to the LlamaCasty wordmark** (right-click → Report Bug / Feature Request /
About). Left-click still opens About. The gear tab no longer carries a menu at all, so clicking
it does exactly one thing.
OverlayHost keeps only the Bug / Feature / About panels; its brand-logo handlers and the dev-panel
injection moved with the settings block. BrandLogoPreviewTests follows the control (same assertions,
new path). Release 0 warnings; 15 tests pass across brand logo, zoom, entitlement and preview
history.
The shell is MaxHeight 700 and the settings panel had grown past it with no ScrollViewer,
so everything below roughly the transition section was unreachable. That is why 'Tablet
(Horizontal Rectangle)' existed in the XAML and in the model but never appeared in the app:
the shape control itself was cut off, not the option.
Panel row is now * with an Auto ScrollViewer, so every section is reachable and the next
one added cannot silently fall off the bottom.
While zoom is active a left drag moves the box and never selects or moves a layer beneath
it (creator ruling 2026-11-01). MouseMove already owned the zoom drag; the missing guard was
in MouseLeftButtonDown, which happily hit-tested a layer first and left a stray selection
plus a half-started drag behind the moving box.
Creation holds Ctrl (Ctrl+right-click), and Windows repeats a held modifier. The repeat
tick landed after the box existed, so the dismiss handler saw an open box and closed it:
appear, then vanish ~500ms later. Guarded with e.IsRepeat, which only ever skips the
repeat events — a genuine second press still closes the box.
Two creator directives, 2026-11-01.
**Ctrl-down dismisses an open zoom box.** Window-level PreviewKeyDown, so the same hand that
opened it can put it away. It cannot cancel itself at creation: Ctrl is already held before
the right-click that makes the box, so the keydown fires while nothing is open.
**Follow mode, default Anchor.** A PillToggle in App Settings ("Follow the box"), persisted
as Zoom.FollowBox. Off — the default — keeps the 2026-10-08 model: the capture stays on the
clicked point and dragging only moves the box over it. On, UpdateZoomMove re-anchors the
capture to the box centre (half the box's size, clamped per axis), so the magnifier shows
whatever it hovers. Flipping to Follow while the box is open snaps it immediately.
Three tests: anchor drags leave CaptureX alone, follow moves it to the expected quarter-offset
centre, and the setting round-trips through LayoutStore (tested against the store, not via two
view models — two live VMs fight over the temp DB, which is a fixture problem, not a bug).
Both new test classes share a collection tag: MainViewModel.LayoutPathOverride is static, and
xUnit runs classes in parallel, so without it the two view models collided (one failure in a
combined run, clean when run apart).
Release build 0 warnings; 14 tests pass across zoom, entitlement and preview history. Debug
build is blocked by the running app (PID 47388) — close it and the exe updates.
Creator report: Ctrl+right in edit mode and left-click in preview did nothing when
neither streaming nor recording. The bindings were correct; the action was not.
Two causes, both in the model rather than the handler:
- ActivateZoom opened with `if (!(IsLive || IsRecording)) return;` — the box could not be
created outside a session at all.
- ToggleZoom only ever called DismissZoom, so "toggle" could turn it off and never on.
Now ToggleZoom(x, y) activates at the cursor or dismisses if already open, and the live-only
guard is gone — the magnifier is an editing aid as much as a live one. Both call sites pass
the canvas point, so the box still anchors on the click rather than the frame centre.
Debug 0 warnings; ZoomBox + ZoomMagnifier tests pass (3).
Two event-pairing bugs found by validating every handler instead of trusting the table.
1. Ctrl+right-click opened the context menu in edit mode. Cause: WPF's PopupControlService
opens menus on right-button-UP, and only the DOWN event was being handled — so the zoom
toggled and the menu appeared under it. Both events are now handled when Ctrl is down.
(The creator saw this in edit mode; preview mode had the same latent bug.)
2. The social bar's left-click was dead in preview mode and dragged the layer beneath it in
edit mode. Cause: PreviewGrid handles the TUNNELLING PreviewMouseLeftButtonDown, which
fires before the bar's bubbling handler — and since preview-mode left-click now toggles
zoom, that handler swallowed the bar's click too. The preview handler now steps aside when
the point is inside the bar's bounds (SocialBarElement.RenderSize, translated to canvas).
Audited and left alone because they are correct: left-down → resize handle / element drag /
deselect; move → zoom drag before edit drag (by design); left-up → EndPreviewDrag; right-up
→ zoom-drag release then the Ctrl swallow.
Build Debug 0 warnings, 22 tests pass across ZoomBox, PreviewHistory and SocialBar.
The first half of surge day 1. One question, "may this session emit Pro output?", with
one method on the interface so nothing downstream knows which rail proved it.
SteamEntitlement reads the lifetime SKU the way Valve intends: SteamAPI.Init() then
SteamApps.BIsDlcInstalled(dlcAppId). Four different failure paths all resolve to the
free tier rather than to Pro or to a crash — no DLC id configured, no Steam client,
steam_api64.dll missing (a throw on first touch), and simply not owned. A copied folder
run without Steam is the common case, not an exceptional one.
NotConfigured() is the shipping default until Steamworks creates the DLC app; it answers
false without ever touching the native library, so today's builds behave exactly as they
did before this commit.
HasProOutput is now IsPremium || DeveloperMode || rail, with an internal EntitlementOverride
test seam (internal, because a public setter here is a licence bypass). Four tests: no id
reads false, no client reads false without throwing, the fake reports what a test sets, and
the view model takes its answer from the rail.
Steamworks.NET 2024.8.0 added; the native DLL still comes from scripts/steam-sdk.sh, so the
csproj change is three lines and no formatting churn.
Creator ruling 2026-11-01, and the reason is live-stream ergonomics: no two-handed
chords while a broadcast or recording is running.
- Edit mode: left selects / drags / resizes, right opens the context menu, Ctrl+right
toggles the zoom box. Chords are acceptable here because editing is a stopped activity.
- Preview mode: left toggles the zoom box, right opens the context menu, and Ctrl+right
is swallowed outright — handled rather than left to fall through, so Ctrl+right cannot
open a menu by accident while one hand is on the mouse.
This also removes the old live behaviour where right-click activated the magnifier at the
cursor point (and dismissed it). Zoom in preview is now a plain toggle; if point-zoom is
wanted back it needs a one-button gesture, not a chord.
Build: Release 0 warnings. Debug is currently blocked by the running app holding the exe
(PID 47252) — close it and the Debug build copies normally.
Three creator directives (2026-11-01), done ahead of the surge.
**Gear moved to the preview rail** — first tab, orange (Brush.Attention), gear icon
only. Left-click opens the same app menu the top bar gear owned (Settings / Bug /
Feature / About), right-click goes straight to App Settings; both behaviours moved
with it, so nothing lost an entry point. TopBar keeps the wordmark and EDIT.
**EDIT right edge aligned to the layers panel.** The work area is margin 8 + a 360px
column, the top bar is padding 16, so the shared edge is 352 inside the bar. TopBar
column 0 is now a fixed 352 grid with EDIT right-aligned in it — alignment by
arithmetic instead of by eye.
**Preview undo/redo: Ctrl+Z / Ctrl+Shift+Z.** Models/PreviewHistory snapshots element
REFERENCES plus geometry, visibility, order and membership — a deep clone would mirror
every property of a dozen element subclasses and quietly miss the next one added.
One snapshot per gesture (pushed at drag/resize start, never in the move loop), bounded
at 50, redo survives multiple undos, cleared on layout load. Gated on EditingActive:
undo while the preview shows program output would rewrite a scene nobody is looking at.
Honest scope, in the type's doc comment: layout edits only. Colour/opacity/border/font
edits are not captured yet, so Ctrl+Z after one of those restores the last layout change.
6 tests in PreviewHistoryTests; 19 pass across it and the neighbouring UI classes; Debug
and Release both build at 0 warnings.
Correcting my own plan: the surge is six calendar days (Mon 2 - Sat 7), Saturday included,
and it finishes the coding side. Every open row is assigned to a day; the week-2 and
after-launch sections are gone because there are no such sections.
Days: licensing (entitlement, licence UI, greyed tiers, system messages), release blockers
(visibility picker, output contract, webcam identity, Move transitions), resilience (TASK 32,
bandwidth step-down), content and media (text layer, media wiring, profanity filter,
scheduled streams), data and settings (reward persistence, YPP slice 2, defaults split,
scene audio, settings round, disk hygiene), finish and prove (publish recording, undo, gold
pass, full sweep).
Target 6-8 units a day against a measured baseline of 3-5 — that gap is the surge. If a day
overruns, the smallest item moves; a launch blocker never does. Day 6 is the only polish day.
Non-coding is parked on Valve (identity verification, store page, depot); the week is code,
tests, debugging, polish. Ordered by what actually blocks a public build: entitlement seam
and licence UI (days 1-2), greyed tiers (2), visibility picker (3), stream resilience (3-4),
output contract (4), gold pass (5).
Sized honestly against the measured rate: ~50 units remain, 15-25 fit in five days, so the
plan names week-2 candidates and the five items that should not block launch at all
(scheduled streams, scene audio, defaults split, YPP slice 2, feedback batch).
Every unit carries the same definition of done — clean build, per-class tests, verify.sh on
the declared scope, and the falsified doc corrected in the same commit.
The partner dashboard offers exactly one download because there is only one: the SDK zip
carries the runtime (steam_api64.dll) and the release tooling (sdk/tools/ContentBuilder
with steamcmd.exe for Windows and steamcmd.sh for Linux/macOS, plus the app_build and
depot_build VDF templates). Verified against the zip rather than assumed.
scripts/steam-sdk.sh gains --contentbuilder, opt-in because it is 27 MB of binaries that
only the uploading machine needs.
Distribution.md §2 now opens with that fact — there is no separate ContentBuilder
download to hunt for — plus a reference table of the pages that actually get used:
SteamPipe upload, DLC setup, BIsDlcInstalled, store artwork sizes, Coming Soon window,
the Wallet rule, recurring subs, partner support and Steamworks.NET.
The SDK zip is 24 MB of headers, examples and tools we never build. The runtime
dependency is one native library, so scripts/steam-sdk.sh extracts exactly
sdk/redistributable_bin/win64/steam_api64.dll into steam/ (gitignored, like ffmpeg/ —
the script is the audit trail) and writes steam_appid.txt = 480, Valve's Spacewar app,
so SteamAPI.Init() resolves an app id locally before LlamaCasty has one of its own.
Two csproj details that would have cost a debugging session:
- Link="steam_api64.dll" puts it BESIDE the exe; without Link, None items keep their
relative path and it lands in steam/, where the loader does not look.
- ExcludeFromSingleFile, for the same reason ffmpeg needed it: a native DLL otherwise
gets swallowed into the single-file bundle and cannot be loaded at runtime.
steam_appid.txt is Debug-only — Valve's guidance is not to ship it — and the publish
output confirms it: dll present at the root, no appid file, exe still 127 MB (proof the
DLL was not bundled).
Also queued, as asked: preview undo (Ctrl+Z / Ctrl+Shift+Z) in edit mode, noted as the
partner to the defaults-vs-current split — undo covers the slip, defaults cover the mess.
The paid delta is output quality, so the rule needs to be measurable rather than a word:
921,600 pixels and 30 fps, fail-closed. Models/OutputProfile.cs is that rule as pure
policy — a permitted tier passes through untouched (Pro, or the free tier's own 720p30),
a disallowed one resolves to the best tier the budget allows and carries ITS bitrate, so
a capped user is never offered an 8 Mbps budget for a 720p frame.
Applied once, in BuildEncoderOptions. That is genuinely one place: the stream and the
local recording are two output blocks of ONE ffmpeg process fed by one EncoderOptions,
so there is no second encoder to forget. (commercial.md claimed "both encoders — never
two checks"; the code is stronger than the doc, and the doc is corrected.)
Developer override, as asked: a "Developer mode — all resolutions" checkbox in App
Settings, bound to MainViewModel.DeveloperMode, which feeds HasProOutput. It is not
hidden in a release build — Controls/DeveloperPanel's Page and Compile items are removed
when Configuration != Debug, and OverlayHost adds it at runtime inside #if DEBUG, so a
shipped exe has no BAML for it at all. The setter also refuses the value when
DevBuild.IsDevelopment is false, which is now the single source for that question (the
scoreboard partial had its own duplicate const).
Two traps worth their lines: a `const bool` dev flag makes `if (!Flag) return;` an
unreachable-code warning in one configuration or the other (CS0162), so DevBuild uses
static readonly; and a Condition on an ItemGroup is invisible to a test reading
item.Attribute("Condition") — read the parent.
Tests: 14 pass across OutputProfileTests, AssemblyIdentityTests and StorePackagingTests.
The invariant test is the one that matters: iterate every shipped tier under a free
entitlement and assert none emits more than the budget, so a future 4K tier fails here
instead of shipping to everyone. App builds Debug and Release at 0 warnings.
Renames AssemblyName to LlamaCasty before the first Steam depot — Steamworks is explicit
that renaming a live exe is painful, so this had to land first, not later.
Four assembly-qualified pack URIs carried the old name, not three: MainWindow (window
icon), OverlayHost (logo), RenameRecordingDialog and KeepBroadcastDialog. Pack URIs
resolve by assembly name at runtime, so a stale one compiles, passes every test and then
silently renders nothing the first time that view opens. AssemblyIdentityTests guards
both halves — the assembly name, and no source XAML still naming the legacy assembly.
Packaging/Package.appxmanifest and package-msix.sh carry the exe name too.
scripts/publish.sh replaces the by-hand publish: single-file win-x64, ReadyToRun,
ffmpeg beside the exe, and it refuses to finish if ffmpeg, LICENSE, PRIVACY.md or
THIRD-PARTY-NOTICES.txt are missing, or if a test assembly leaked in.
That last guard exists because the first publish was wrong in a way no test could see:
PublishSingleFile + IncludeNativeLibrariesForSelfExtract bundled the libav*.dll family
into the exe — a 9-file output with no ffmpeg folder and a 182 MB binary, so the locator
would have found nothing at runtime. ExcludeFromSingleFile="true" on the content keeps
the folder a folder. Diffing against a control publish without the single-file flags
found it; guessing at item globs wasted two attempts first (recorded in MyMistakes.md).
Measured: 127 MB exe + 129 MB ffmpeg = 257 MB depot. Tests: AssemblyIdentity,
StorePackaging, BuildStamp, BundledFonts all pass; app builds with 0 warnings.
The site said "Coming soon to Steam" while the app docs still said direct download plus
winget primary with Steam parked. One of them had to move, and the creator's ruling is
Steam exclusive: a free app on Steam with the paid edition as a Steam DLC, and the
$10/month plan sold off-Steam by Polar.
Records the constraint that shapes the code, not just the prose:
- Steamworks requires in-app purchases to use the Steam Wallet (Microtransactions doc,
quoted in commercial.md), so the monthly is *stated*, never *sold*, inside a Steam
build; the lifetime is plain DLC bought on the store page and read with BIsDlcInstalled.
- Entitlement is `steamDlcOwned || polarKeyValid`, both resolving to one OutputProfile.
steam_api64.dll ships beside the exe and is a functional dependency, not the rejected
"IP protection" native DLL — without it DLC ownership cannot be read. Launched without
Steam, the app falls back to the free profile rather than refusing to start.
- Signing is moot: Steam installs never meet SmartScreen. Artifact Signing stays on the
shelf for the day a non-Steam download exists. Year-one fixed cost is ~$115.
- The exe rename must land before the first depot upload — Steamworks warns about
renaming a live exe.
Distribution.md is rewritten to SteamPipe mechanics (publish output, depot, steamcmd,
DLC wiring, clean-account purchase/refund test). product.md, decisions.md (a new
"Steam exclusive" entry with every dead vector), TASKS.md (Steamworks entitlement row,
Steam packaging row), ai.md, index.md and the TASK 48 banner follow. MyMistakes.md gains
the Steam rules that cost real time today: installs skip SmartScreen, updates are free,
the Wallet rule, and the recurring-billing caveat.
Four things derived this session superseded what the plan said twenty-four hours earlier,
and the docs are corrected where each one died:
**Licensing needs no server.** Polar's customer-portal endpoints authenticate on the key
itself plus the public organization_id; the org access token is only needed to create
products. Channel binding rides in `conditions: {channel_id}`, re-checked on every
validate — so the "claim page" (a hosted OAuth flow that wrote the UC id onto the key)
and the key database it implied are deleted. Device management, key rotation and
subscription auto-revocation are Polar's; four states, one lease, no callback endpoint.
**Signing is deferred until two subscribers.** It never removes the day-one SmartScreen
warning (EV's instant-bypass died in 2024), so buying it before revenue buys only the
publisher line. Renamed to Azure Artifact Signing, $9.99/mo Basic, and it requires a
paid Azure subscription. Year-one fixed cost drops from ~$135 to ~$15.
**The Store account is free.** Microsoft waived the $19 individual fee and removed the
$99 company fee in May 2026, which makes the Store the only zero-cost route to a
Microsoft-signed install — the free answer to SmartScreen, noted beside the paid one.
**Support is a filter, not a promise.** Email, best effort, no SLA, refunds on request
without argument; no training service, no helpdesk. A repeated question becomes a
training video on @llamacasty, which is content and monetization instead of a ticket.
GitHub issues on the releases repo are the deliberate friction.
Also settled: binaries live in a second Gitea repo (`llamacasty-releases`) push-mirrored
to a public GitHub repo — issues and assets public, code private, one publish direction
(a git mirror carries refs, not GitHub Release assets); `@llamacasty` is
standard-verified with intermediate features, so live streaming, >15 min uploads and
custom thumbnails work today and no SIM or ID is needed; and OAuth comes out of Testing
mode by publishing the app (100-user lifetime cap, no 7-day token death).
TASKS.md now opens with the four-day surge slice — artifact shape, output gate,
entitlement seam, real-machine day — because those are what the first public release
waits on. HANDOFF.md rewritten. MyMistakes.md gains the Polar recipe and the
"verify means three different things" entry. MARCOM.md gains the support→content loop
and the surface roles.