The task asked for a `RewardEvents` table plus a backfill. That would have contradicted the published
promise that no viewer, member or donor information is retained after the session ends, and it would
have meant owning a ledger that YouTube already keeps.
So the report is DERIVED on demand instead:
- `Services/SuperChatEventService.cs` — `superChatEvents.list`, parsed for both event types (a sticker
must not be dropped), authorised by the existing `auth/youtube` scope, so no re-consent.
- `Models/SessionRewardSummary.cs` — rolls events up for the session window with **per-currency totals
that are never summed together** (a $5 and a €5 are not $10). Nothing is written down.
- The YPP drawer gains a **THIS SESSION** section: counts are neutral and always shown when there were
events; money appears only when the creator asks for it. `Show monetary metrics` is a drawer toggle,
persisted, **off by default** — a creator who never monetized is never shown a $0.00.
Also: money is labelled as estimates (removed/refunded events are excluded and totals can be restated
for weeks, not days).
Tests: `SessionRewardReportTests` — both reward types parse, the window makes it a session rather than
a channel report, currencies stay separate, an empty session shows nothing, a sticker-only session
still counts. `BackOnAirTests` moves into the serialised `MainViewModelLayoutPath` collection: it builds
a MainViewModel directly and was flaking against parallel tests that swap the static layout path.
FAST gate: 557 passed, 0 failed, 0 warnings.
Creator: system messages are limited to two lines; the label above the message ('STEAM ID NOT
PRESENT', 'STREAM') was repeating what the row already said and pushing the stack past its budget.
AttentionAlert loses Label; rows render Text only. The licence row is now exactly:
Steam ID Limit: 30fps
Click for More Info
(60fps with a close control once owned). Rows are identified by Id internally, so nothing in the UI
depends on the removed text. Tests updated to assert position/text rather than the heading.
Creator design (2026-11-05). A stack of red rows at the top of the left panel, above both mode grids
so it shows while editing and while live, pushing the panel's content down.
- Row 1 is the **Steam licence indicator** and nothing displaces it. It reads as status, not a
warning: "Entitlement 30 fps · Maximum 60 fps", both numbers derived from QualityOptions and
HasProOutput. While higher tiers are unavailable it shows a **pin** (standing indicator, no close
control); once ownership is verified the pin becomes a **close control** and the dismissal is
persisted (`Steam.LicenceIndicatorDismissed`), permanent while ownership holds. Losing ownership
restores it as pinned — a change of state, not a preference. Click → About.
- **Event rows stack beneath, newest first**, one row per episode (an episode advancing its state
updates its own row rather than adding another). Each is dismissible. Click → the Logs tab opens
with that event's sequence range painted red (`HighlightedLogFrom/To` + `LogInRangeConverter`; two
numbers rather than a collection because the log list is virtualised and realised rows do not
re-evaluate on membership changes).
- Replaces the old red panel under the quality picker, which is removed.
- The Steam diagnostic text loses "Contact the creator or support" for a neutral
"Steam licensing is not configured in this build."
Tests: `AttentionAlertStackTests` — pinned first with the status text; owned → closable and the close
survives a reload but ownership loss restores it pinned; pinned cannot be dismissed; event rows LIFO
with in-place episode updates; clicking an event opens Logs and sets its range. AboutHub + Entitlement
tests updated for the removed panel and the new wording. FAST gate: 532 passed, 0 failed, 0 warnings.
Three reports from the creator, plus two bugs the real clip exposed.
1. A video layer was INVISIBLE in the preview. The pane's per-layer Image is Collapsed by
default and switched on by a whitelist of DataTriggers; MediaSource matched none, so the clip
decoded into a bitmap that nothing displayed. Same defect the alert box hit on 2026-09-26 and
the scoreboard after it — now recorded at the top of docs/ai/ui-surface.md with a test that
asserts the bound Image is Visible (`MediaPreviewDisplayTests`).
2. Play is no longer tied to Loop: the button is always enabled (creator ruling — Loop must not
toggle Play). Loop still restarts a finished clip, which is the behaviour that was broken.
3. Geometry is now the LAST section of the properties list for every draggable element, with
opacity at the top; the web source's duplicate geometry block is gone (it now uses the shared
one, which had been sitting above the media panel).
4. The physical mouse-drag test is deleted. It injected real cursor movement, hijacked whatever
machine ran it, and failed whenever the desktop was busy. The arithmetic it covered now lives
in `Helpers/DragReorderMath.cs` — pure, and covered by `DragReorderMathTests` (threshold,
up/down moves, no-op and out-of-range). The two persistence tests were already synthetic.
5. Real-clip check (creator's `test_greenscreen_moving_subject.mp4`, 1920×1080): the detector
REJECTED it — a fully saturated green sits at value 1.0 and the detector's 0.98 brightness
ceiling threw it away. White highlights are excluded by the saturation floor, which is the
property that actually separates them, so the ceiling is gone. With it fixed, the clip is
detected as green (high confidence), and keyed through our own pipe 97.8% of pixels go
transparent. Measured: keying with the canonical #00B140 keys 0.0% of this clip — which is why
the key colour comes from the measured screen.
Tests: 567 passed, 0 failed, clean build 0 warnings. The gate's scope check flags
`Assets/Videos/test_greenscreen_moving_subject.mp4` — the creator's working copy, deliberately not
committed; the fixture lives under ytLive.Tests/Fixtures.
Reported 2026-11-05: "when I click Loop, the video doesn't play in the preview pane". Two
causes, both real:
- `VideoClipPipe.StartAsync` bailed out once it had run once (`_run != null`), so a clip that
reached EOF could never be started again — it held its last frame forever.
- Loop is only consulted at end-of-file by a LIVE decoder, so flipping it on a finished clip
did nothing at all.
Now: the pipe reports running state and is restartable after a natural end; the manager marks a
session finished (keeping its last frame) and exposes `IsRunning`/`RestartAsync`; the layer shows
`IsMediaRunning`/`IsMediaFinished`; flipping Loop on a finished clip restarts it.
UI: `▶ Play` sits to the right of the **Video File** label and is enabled only while Loop is off
(creator ruling: with Loop on the clip already runs continuously, so there is nothing to start).
The panel says "Clip finished — holding the last frame." so a frozen picture explains itself.
Also: verify.sh no longer runs physical-input tests by default. That test moves the real cursor
(SetCursorPos + mouse_event); running it mid-gate hijacks the machine someone is using, which is
exactly how it felt. Opt in with PHYSICAL_TESTS=1 when the desktop is idle; the header documents
the scoped-run command for working hours.
Test: `MediaPlaybackRestartTests` (pipe restart, finished state, Play again, Loop-on-finished).
8 scoped tests green. FULL SUITE NOT RUN — the machine was in use; run scripts/verify.sh in a
quiet window before the next milestone.
TASK 64 slice F — the two things left after the feature worked by hand.
- App Settings → **Video clips → Auto Green/Blue Screen** (off by default). When on, a
high-confidence detected screen is keyed as soon as the clip is added; the panel says
"Removed automatically" so an automatic change is never silent. Medium confidence still
asks, low says nothing — a wrong automatic key eats the picture.
- **A clip is a clip:** the alert box's own replacement clip keys through the same settings
block (one alert box per layout, so its settings are the ones the next alert uses), and
choosing an alert clip runs the same detector. The Green/Blue Screen panel now appears for
a video layer *or* an alert box with a custom clip (`Source.ShowsChromaKey`).
- Spill ships as the creator-facing **Fringe** switch; nothing further to tune behind it.
Test: `ChromaKeyApplyTests` gains the auto-apply case (no click, still explicit in the panel)
and an alert-clip case (its pipe asks ffmpeg for colorkey+despill with the blue screen type).
Docs: TASK 64 complete in TASKS.md, known limits recorded in the task file, HANDOFF rewritten.
verify.sh: 546 passed, 0 failed, 0 warnings.
TASK 64 slices D and E: the feature is usable end to end.
- Add a video file → one frame is probed (new `IChromaProbe`/`FfmpegChromaProbe`, one ffmpeg
pass at 160x90, off the UI thread) and the layer gets an offer: "Looks like a green screen —
Remove it", with the measured colour as a swatch.
- Accepting it turns the offer into settings (Amount / Softness / Fringe) that reach ffmpeg as
`colorkey` + `despill` + `format=bgra`, so the key is computed in the pipe and both consumers
(the shared preview bitmap and the compositor's frame) carry the same alpha.
- Media sessions are now keyed by **path + look** (`MainViewModel.MediaSessionKey`), so two
layers with the same settings still share one decoder, and changing the look releases the old
session and starts the new one. Removal, load reconciliation, loop and audio settings all move
to the same key.
- Settings persist on the `Source` row (six ALTER TABLE guards + SELECT/INSERT), so a keyed layer
comes back keyed.
- Panel section is plain creator words: Green/Blue Screen, Amount, Softness, Fringe.
Test: `ChromaKeyApplyTests` — the pipe asks ffmpeg to key (and does not when off); a green-screen
clip is offered, accepting it starts a keyed session, the layer's resolver then reads that session
rather than the old one; the setting survives a save.
Docs: TASK 64 D/E ticked with slice F (auto-apply setting + alert clips) left open; frame-pipeline
records the decode-option design; HANDOFF rewritten. verify.sh: 544 passed, 0 failed, 0 warnings.
A video file was picture-only: the decode pipe passed `-an`, so a starting-soon
or BRB clip with music played silent everywhere. Adds sound to every clip and
collapses the two decoders into one.
- `Services/VideoClipPipe.cs`: the shared pipe behind `MediaVideoSource` (TASK 21)
and `AlertClipDecoder` (TASK 47) — video (`rawvideo bgra`, scaled) + audio
(`f32le -ac 2 -ar 48000`, 50 ms chunks, byte-carry across reads), both paced to
real time, loop restarts both so picture and sound stay together. Alert
behaviour is unchanged.
- `MediaVideoSourceManager` applies the layer's Level/Mute per session and raises
`AudioAvailable`; `MainViewModel` feeds it to the new
`AudioMixer.EnqueueDesktopMediaAudio`, which joins the DESKTOP/GAME ring so the
desktop fader and the mic auto-ducker apply exactly as they do for game audio
and TRAX (creator ruling 2026-11-05: audio joins the group).
- Per-layer `MediaMuted` + existing `MediaVolume` surfaced as Mute/Level in the
properties panel; `MediaMuted` persisted (ALTER TABLE guard + SELECT/INSERT).
- Level/mute are per SESSION because one decoder is shared per file path — the
last layer touched wins; one decoder per layer would play the file twice.
Test: `MediaSourceAudioTests` — the pipe emits 50 ms chunks at 48k stereo, the
manager scales by level and drops when muted, and a media layer's sound moves the
desktop meter. Alert/decode suites unchanged and green.
Docs: task-21 closed on item 10, the "silent soundtrack" facts corrected in
frame-pipeline/output/overlays, HANDOFF rewritten. verify.sh green (529 passed;
the two documented pre-existing failures only).
TASK 21's picker slice: the decoder, manager, pacing and loop mechanism were
already shipped but nothing ever acquired a session, so a media Source rendered
nothing. Adds "Video File" to the (+) menu (video-filtered OpenFileDialog),
one decode session per distinct path with a HasSession guard, release when the
last scene reference goes, and a post-load reconcile. Loop is a manager-level
per-path answer ("any live reference loops") applied before StartAsync and
updated live via SetLooping. Properties panel shows the file with Change… and
Loop. Volume stays unwired: media audio rides the desktop loopback, TRAX-style.
Reference: OBS's media source (file → decode → composite into the scene) is the
established answer for this feature; the lifecycle shape mirrors this repo's
WebView2/ScreenCapture registration rather than inventing a new one.
Test: ytLive.Tests/MediaSourceAcquisitionTests.cs — add starts one decoder and
frames reach the layer, loop flip reaches the decoder, remove stops it.
Docs: task-21 closed, TASKS row + Day-4 row + stale 3·17 row corrected,
frame-pipeline acquisition note, HANDOFF rewritten. verify.sh green.
Use category-filtered font and selected-item dropdowns, separate horizontal and vertical alignment, and reuse the border-color palette templates for text color. Persist vertical alignment additively. Follow the established static text-source pattern: https://obsproject.com/kb/text-sources
Raster static text on UI-thread changes and reuse the same transparent BGRA frame in preview and all compositor paths. Cache text frame identity in the frame-pump signature and invalidate static bakes on edits. Follow OBS text-source conventions: https://obsproject.com/kb/text-sources
TextOverlay layers now have a multiline editor, Windows font and size controls, color/emphasis/alignment settings, and a visible draggable preview. Text sources follow OBS's static text-source conventions: https://obsproject.com/kb/text-sources
Add additive defaults and round-trip tests for per-layer text content and formatting. Model the static text source after OBS text-source conventions: https://obsproject.com/kb/text-sources
Model the AlertBox and standalone ticker with shared settings; scene tickers render the in-memory active and queued events without saving history. Keep AlertBox content active-event-only.
Ref: https://obsproject.com/kb/obs-studio-overview
Keep non-owner resolution choices visible but muted. Selecting one preserves the free tier and opens About; external navigation is only the explicit llamacasty.com link. Ref: https://streamlabs.com/desktop
Creator request: a sound-byte browse + label under Built-in video, with an option to loop the
sound while the clip plays. The video itself is always one pass to completion.
- Source gains AlertAudioPath and AlertAudioLoop, persisted (column + migration + INSERT +
SELECT + reader, the whole chain — that chain is where the blur crashed once).
- The sound byte plays through MediaPlayer on the default output device; MediaEnded re-seeks to
zero while looping, and StopClip kills it so a tail cannot bleed into the next alert.
- The clip's OWN soundtrack moved off the mixer and onto the device as well
(Services/Audio/AlertAudioOutput: one WaveOutEvent + buffered float provider).
Why the move: the creator asked that alert audio — the clip's track or the added sound byte —
appear in the desktop sound bar. Only audio that reaches the default device is picked up by the
WASAPI loopback that feeds both the meter and the stream. The old EnqueueAlertAudio route put the
sound in the stream but left the meter flat and the room silent.
Tests: the sound byte and its loop flag round-trip through SQLite, and a fresh alert layer starts
with no sound byte and no loop. Release 0 warnings.
Creator rulings, 2026-11-01.
- Master strip is 44px (from 36) and its meter is now the largest on screen: 420x14 with 32
segments, centred under the preview, with a 12px MASTER label — bigger than the 9px bay
labels. L/R imbalance is a flag on the left, MONO and the session clock on the right.
- The kbps / fps / dropped counters are gone from that line: the live readouts already sit
above the preview, and the duplicate was noise rather than telemetry.
- TRAX is its own bay (MIC | GAME | TRAX | LIP-SYNC) with its own meter bound to
TraxMeterFraction. It lived inside the game bay with no ladder, which meant whether the bed
was actually playing could not be answered from the dock — and the player already measures
its own output.
- Lip-sync is narrow (0.45 star) since it is one slider and three presets; the three sound bays
are equal width, so their meters keep the same relative size.
AudioDockLayout moves with it (156 = 112 + 44; collapsed 44) and the layout test is updated.
TraxBayTests now asserts the opposite of the old ruling: the bay HAS a meter, and the game bay
no longer carries it.
Source.IsDraggable listed Image/Web/Chat/Alert only, so a blur had no selection box, no corner
handle, and no hit-test — the rectangle existed in the render but could not be grabbed. Adding
Blur to that list gives it the same selection chrome and resize path every placeable layer has
(drag to move, corner dot to resize, one undo snapshot per gesture).
It is selected on add (AddSource already does that), so the rectangle appears already outlined
and ready to size.
Creator request 2026-11-01: a layer that hides part of the desktop from viewers. Box or circle,
drag/resize like any layer, one strength slider, several allowed.
**Z-order is policy, not preference.** `AddSource` inserts a blur directly above the background
and therefore below the brand logo, and `OnSceneElementsReordered` pushes any blur that ends up
above the brand back down. Nothing else in the app can move it into the brand's way.
**Overlap = the strongest single blur, never a stack.** `SceneCompositor.ApplyBlurLayers` collects
every visible blur the first time one is reached in the z-order, sorts them strongest-first, and
shares one coverage map: a pixel already covered by a stronger blur is skipped. Blurring
back-to-front would have produced something stronger than any slider setting allows, which is
exactly what was ruled out.
**One blur curve, shared with the webcam.** `RegionBlur` carries the constants the webcam blur
already used — downscale 4, radius 1–6 downscaled px, `RadiusFor(strength)` — and
`BackgroundEffectProcessor` now delegates to it instead of holding its own copy. The layer's
slider is the same 0–1 scale with the same 0.5 default, so "half strength" means the same blur in
both features. Cost is proportional to the blur's own rect, not the frame.
**Live scene only**, enforced in `AddSource` as well as the (+) menu (`CanAddBlur`), so a stale
menu item or a scripted call cannot plant one on BRB. `ElementKind.Dynamic`, so it is never baked
into the static base and every render path gets it — pump, preview, thumbnails, scene dump.
Persistence: `Source.BlurAmount` column + migration; shape rides the existing `ClipShape`.
Properties panel: Box | Circle plus the strength slider, gated on `IsBlurSelected`.
4 tests: outside the mask is byte-identical, inside loses its hard edges, a circle leaves its
box corners alone, and two identical stacked blurs equal one (the coverage map). Release builds
at 0 warnings.
Three creator directives (2026-11-01), done ahead of the surge.
**Gear moved to the preview rail** — first tab, orange (Brush.Attention), gear icon
only. Left-click opens the same app menu the top bar gear owned (Settings / Bug /
Feature / About), right-click goes straight to App Settings; both behaviours moved
with it, so nothing lost an entry point. TopBar keeps the wordmark and EDIT.
**EDIT right edge aligned to the layers panel.** The work area is margin 8 + a 360px
column, the top bar is padding 16, so the shared edge is 352 inside the bar. TopBar
column 0 is now a fixed 352 grid with EDIT right-aligned in it — alignment by
arithmetic instead of by eye.
**Preview undo/redo: Ctrl+Z / Ctrl+Shift+Z.** Models/PreviewHistory snapshots element
REFERENCES plus geometry, visibility, order and membership — a deep clone would mirror
every property of a dozen element subclasses and quietly miss the next one added.
One snapshot per gesture (pushed at drag/resize start, never in the move loop), bounded
at 50, redo survives multiple undos, cleared on layout load. Gated on EditingActive:
undo while the preview shows program output would rewrite a scene nobody is looking at.
Honest scope, in the type's doc comment: layout edits only. Colour/opacity/border/font
edits are not captured yet, so Ctrl+Z after one of those restores the last layout change.
6 tests in PreviewHistoryTests; 19 pass across it and the neighbouring UI classes; Debug
and Release both build at 0 warnings.
The paid delta is output quality, so the rule needs to be measurable rather than a word:
921,600 pixels and 30 fps, fail-closed. Models/OutputProfile.cs is that rule as pure
policy — a permitted tier passes through untouched (Pro, or the free tier's own 720p30),
a disallowed one resolves to the best tier the budget allows and carries ITS bitrate, so
a capped user is never offered an 8 Mbps budget for a 720p frame.
Applied once, in BuildEncoderOptions. That is genuinely one place: the stream and the
local recording are two output blocks of ONE ffmpeg process fed by one EncoderOptions,
so there is no second encoder to forget. (commercial.md claimed "both encoders — never
two checks"; the code is stronger than the doc, and the doc is corrected.)
Developer override, as asked: a "Developer mode — all resolutions" checkbox in App
Settings, bound to MainViewModel.DeveloperMode, which feeds HasProOutput. It is not
hidden in a release build — Controls/DeveloperPanel's Page and Compile items are removed
when Configuration != Debug, and OverlayHost adds it at runtime inside #if DEBUG, so a
shipped exe has no BAML for it at all. The setter also refuses the value when
DevBuild.IsDevelopment is false, which is now the single source for that question (the
scoreboard partial had its own duplicate const).
Two traps worth their lines: a `const bool` dev flag makes `if (!Flag) return;` an
unreachable-code warning in one configuration or the other (CS0162), so DevBuild uses
static readonly; and a Condition on an ItemGroup is invisible to a test reading
item.Attribute("Condition") — read the parent.
Tests: 14 pass across OutputProfileTests, AssemblyIdentityTests and StorePackagingTests.
The invariant test is the one that matters: iterate every shipped tier under a free
entitlement and assert none emits more than the budget, so a future 4K tier fails here
instead of shipping to everyone. App builds Debug and Release at 0 warnings.
"Clicking on everything produces no visible effect" — the cause was upstream of the controls, and it
is the same defect as the invisible alert box (TASK 47):
- `Source.DisplaySource` returned `VideoImageSource` only for ChatBox / WebSource / MediaSource /
AlertBox. The scoreboard's frame was rendered and published, then never displayed.
- the preview's Image has a per-type Visibility trigger for each of those and none for IsScoreboard,
so even a correct DisplaySource would have stayed collapsed.
Both are fixed, and the layer test now pins the frame-source list AND the trigger so the pair cannot
drift apart again.
Dev-only affordances are ORANGE from now on (creator ruling): "Simulate (dev)" is a TextBlock in
Brush.Attention, so a development control can never be mistaken for product. The panel test pins the
colour.
Creator (2026-10-30): pre-1.0, use DEBUG — add a toggle that simulates the ticker so the strip can
be SEEN and its compositing verified before a real stream.
The sample travels the REAL ScoreboardRecorder a stream uses (one new member, a gift of three, a
milestone, a $12.34 Super Chat), so what the preview shows is exactly what live events produce — a
fake renderer would prove nothing. Toggling off clears to an empty session, so the empty state is
visible too.
Debug-gated at COMPILE time: `DevelopmentBuild` is a const true in DEBUG / false in Release, and the
checkbox binds its Visibility to it. A shipped Release build therefore has no dev control at all,
rather than one hidden by a runtime flag.
Guard: ScoreboardSimulationTests — the sample lands all four tallies through the recorder, off clears,
and the panel + const pair exist in the Dual (DEBUG/Release) form.
Creator: "even if it's not visible, we want to avoid polling."
ScoreboardEnabled is the layer's master switch in the properties panel. Off means two things:
- the strip frame is null in every scene (per-scene eye toggles stay independent), and
- the cadence policy returns None at every phase — a scoreboard nobody can see must not spend quota.
The switch is persisted (Scoreboard.Enabled), because one that resets would quietly resume polling.
The polling gate is ScoreboardPollsEnabled: master switch AND at least one scene with a visible
scoreboard — so hiding it in all five scenes also stops the polls.
Guards: ScoreboardCadenceTests adds the switch off across live/test/recording; ScoreboardProperties
pins the checkbox and the VM surface.
Creator ruling: the Scoreboard layer exists in every scene rather than being added five times.
ScoreboardHealer.Ensure keeps exactly one per scene — healed on load like the Background and Brand
logo — so a scene can never end up with two, and 'off' is the ordinary per-scene eye toggle rather
than a delete.
It is appended as the TOPMOST layer on purpose: a full-width strip draws over the scene, and
inserting it above the background would break the Brand logo's documented invariant (directly above
the background). That choice is also why the layer-reorder test still passes untouched.
Also: a layer-list icon for the type, so the row is not blank.
Guard: ScoreboardHealerTests — one per scene, topmost, exact strip geometry, idempotent, and a
duplicate healed back to one.
Both were mine, from the scoreboard units:
- ScoreboardLayout.FitLine null-forgave tileWidths on one expression and then iterated the field
anyway; it now binds a non-null local once and uses that throughout.
- the output resolver dereferenced _scoreboardPresenter, which is assigned in InitScoreboard — it
is nullable by construction, so the resolver reads '?.' exactly like the other optional services.
Clean build, 0 warnings, scoreboard tests green.
ScoreboardCadence.Due(phase, lastAnalytics, lastSubscribers, now) is the creator's rule as a pure
function: watch hours ONLY during a live stream, every 30 minutes (Analytics answers in days and
test/record sessions have no public audience, so querying then is pure waste); subscribers whenever
the app is working, every 60 s; and nothing at all when idle.
Deliberately returns 'no poll' rather than 'analytics only' — a poll kind the poller cannot perform
is a bug waiting for a caller.
Remaining for the scoreboard: the HTTP providers behind this policy (watch hours via Analytics
reports.query, subscribers via channels.list) and the timer that calls Due(). Recorded in HANDOFF.
Adds SourceType.Scoreboard with the same per-scene eye toggle, drag and presence as every other
element — 'prominent on BRB, dialled back on Live' is geometry, not a second mechanism. Default
geometry is the strip: 1920 wide, 56 tall, bottom edge.
The output resolver returns the presenter's cached frame exactly like the chat box and alert box do,
and every session start clears the tallies. Preview publication writes one shared WriteableBitmap on
the UI thread (the pump thread must never touch one), refreshed only when a displayed value moves.
Guard: ScoreboardLayerTests pins the enum member, the geometry constants, the resolver case and the
session hook, so the layer cannot quietly become a special widget.
ScoreboardTiles decides which of the eight facts appear and shapes their text (money uses the
session's dominant currency and flags a second one rather than converting; watch hours carry
'as of {date}' because Analytics is a daily aggregate). Tiles are OPT-IN, so 'None' really means the
layer draws nothing, and 'Default' is the six session facts.
ScoreboardPresenter owns the raster cache: ScoreboardRecorder.Changed fires only on a visible change,
so the strip rebuilds only then — a per-tick raster would be the compositor's most expensive layer
for identical pixels.
Guard: ScoreboardPresenterTests asserts the cache identity (same instance when nothing moved, a new
frame when a value moved, reuse when a recipient-side gift event arrives) and that an empty selection
returns no frame at all.
ResolveEdges: the strip and the social bar are a coupled pair that own opposite edges whenever both
are visible; the social bar keeps its choice and the scoreboard is pushed to the other edge. Hide
either and the survivor keeps its own preference — so hiding the scoreboard frees the social bar,
which is what 'resolved at render time' has to mean.
FitLine: takes MEASURED tile widths (the renderer measures with FormattedText; a guessed character
width would make the fit lie for a long handle), keeps full size when it fits, shrinks above the
14px legibility floor, and only then wraps — never scrolls, because a reader cannot wait for the
fact to come round.
ScoreboardRecorder owns the one scope the numbers promise. StartSession resets and marks running;
Record ignores everything outside a session (a stale tally from the last stream is exactly the
'today' lie this design avoids); EndSession freezes the numbers but stops them moving, so an End
screen can still show them. Changed fires only when a displayed value actually moves, which is what
keeps the strip's raster cache honest.
ScoreboardState folds the six live-chat event kinds into the numbers a creator puts on screen:
last member, last Super Chat, last gift, members gained, milestones, and session money per
currency. Scope is the running session (creator ruling): reset at start, dead at End, no
persistence.
Two rules are load-bearing:
- money is keyed by currency and never summed across them; the tile shows the dominant currency by
VALUE, so a single EUR tip cannot flip the display away from the larger USD total
- a gifted membership is counted ONCE, from membershipGiftingEvent (which carries the count);
giftMembershipReceivedEvent is the recipient's view of the same purchase and changes nothing.
The test fires five recipient events after one purchase of five and the total must not move.
- The dock now sits in the preview column (Grid.Column=1), so its left edge is the layers panel's
right edge instead of starting under the brand column. It is a preview-column control, not a
full-width footer.
- Expanded height 168 → 148 (112 bays + 36 master strip): the mockup's number read as wasted space
beneath the 154px scene strip.
Guard: AudioDockLayoutTests pins 148 as the design number, so the constant cannot drift silently.
Unit 4 of the sound-bar refactor. `Controls/AudioDock` takes the bottom row that held the empty
`BottomBar` spacer (deleted): four bay containers (MIC / GAME / TRAX / LIP-SYNC) above a 36px
master strip, all token-styled.
Height comes from `Models/AudioDockLayout`, not from a setting: 168px normally, 36px below a 900px
window height. At the 1366×768 minimum a full dock leaves ~398px for the preview, so the collapse
is mandatory, not cosmetic. The dock listens to its window's SizeChanged and re-applies.
Nothing here pretends to be a meter yet — the bays and the master readouts fill in over the next
units, each with its own test.
Guard: AudioDockLayoutTests pins both sides of the threshold (768 collapsed, 1040 expanded), the
boundary itself, and the two heights as the design's numbers.
Reported: EDIT on + ON-AIR on, signed out → the button reads "Test Stream" and cannot be pressed.
Cause: the primary button bound straight to StartTestCommand, whose CanExecute needs a connection.
StartSession already routed signed-out ON-AIR to the sign-in flow; the test path bypassed it.
The route is now explicit and pure: RouteFor(kind, connected) → SignIn | Record | Live | Test. The
primary command calls SignInAsync for the SignIn route, BeginTestStream for Test, StartSession
otherwise — so the label, the action and the sign-in fallback cannot drift apart. Pinned in
SessionStartDecisionTests for both live and test, connected and not.
Creator ruling (2026-10-30):
- EDIT off + ON-AIR armed → the primary button reads "Go Live" and runs the livestream.
- EDIT on + ON-AIR armed → the same button reads "Test Stream" and runs the test broadcast.
- REC armed (or nothing armed) → "Start Recording", whatever EDIT says; there is no test
recording, and an unarmed start records locally rather than doing nothing.
So the fifth button was redundant: `ShowTestButton` no longer feeds any control. The decision is a
pure function (`Models/SessionStartDecision`) so the whole matrix is testable without a window;
`PrimaryStartCommand` follows the same kind, so label and action cannot disagree.
Guard: SessionStartDecisionTests pins the four cases, including the no-dead-ends fallback that my
first version got wrong (unarmed returned Live instead of Record — the test caught it).
Note for the v1 gate: the "hide TEST at v1" item is now satisfied by construction — the test path
is a mode of the primary button, not a separate control.
In the Socials drawer, under the show/hide switch: text colour, an optional background plate
with its own colour and opacity, and a text drop shadow. The bar had been hard-wired
white-on-transparent since it shipped.
- `SocialsConfig` gains five additive properties (BarTextColor, BarBackgroundEnabled,
BarBackgroundColor, BarBackgroundOpacity, BarTextShadow).
- Persistence: five new Socials columns, added by the per-column idempotent migration pattern
(a half-migrated DB heals instead of failing), written in Save and read back in Load with
defaults for pre-existing rows.
- `SocialBarRenderer.Render(entries, SocialBarStyle?)` — the look is a separate value type so the
renderer stays a pure "entries + look" function and the preview can never read a half-applied
config mid-edit. A malformed hex falls back to white/black instead of throwing inside a render
tick.
- The plate hugs the entries (rounded 20px, padding) so it reads as a caption bar, not a band
across the frame. Off by default, because transparent is what creators have today.
- The colour pickers reuse `BorderColorPalette` — one catalogue of the app's colours, per the
TASK 60/63 rule.
Guard: SocialBarAppearanceTests paints the real strip and inspects pixels — default is white with
no plate, a red text colour reaches the glyphs, a 55% blue plate yields half-transparent blue
pixels, and the shadow adds dark pixels that were not there before.
- Source.IsBrandLogo persisted (additive migration); layer healed on load, removal blocked
- Image stored as an asset; settings keep the asset id and file name
- App Settings: Brand Logo file field with Browse
- Default placement top-left; per-scene eye uses the existing element visibility
Test: BrandLogoTests; layout/background tests pass (34). Not pushed.
- LeftPanel: SCENE LAYERS header with layer count; per-type blue icons; properties header gear; layers list min/max height; properties placeholder; list and properties indent
- SceneThumbnailStrip: names/hotkeys over the tile; PROGRAM badge with blinking red dot on the selected tile; orange border on selected and live tiles; fixed the element border override that hid the style border; reflag tiles on load
- LiveScene is now set on go-live, record start, and live transitions (it was never assigned, so IsLive never fired)
- Startup stages the scene named Starting
- DESIGN.md: color roles (red = YouTube/on-air/record, orange #ff8c3a = attention, amber = game audio/Super Chat)
- Staged live tile uses background art instead of the green LIVE placeholder
Not pushed.
The creator (2026-10-21), on Live -> Layers -> webcam -> Properties:
"why does the drop down under the web cam properties not show the same style for
the border color drop down list box?"
"one of the first things we did was define branding. We established look-and-feel
standards. And yet you keep ignoring these and I'm wondering why"
WHY IT WAS MISSED - the answer the creator is owed.
The TASK 58 sweep had already walked the whole app for un-themed controls and the
border picker STILL was not themed, because the sweep looked for control TYPES
(ComboBox / CheckBox / TextBox) carrying no theme style - and the border picker was
NONE of those. It was a "..." Button whose Click handler built a ContextMenu of
swatches in code. It was never in the sweep's scope, and PropertiesStyleTests.cs
(a type-based guard) could not see it either. A picker that LOOKS like a drop-down
is invisible to a type-based audit; the guard has to ask "is this the app's widget?".
WHAT CHANGED
- The picker is now the app's YtComboBox - the widget the Display and Font pickers
wear - bound to the palette (SelectedElement.BorderColorOptions) with its selection
bound by VALUE (SelectedItem -> BorderColorEntry), because WPF's SelectedValue
matching is ordinal and the palette mixes #FFFFFF and #e94560.
- The closed box shows the swatch + the colour's NAME; the rows show swatch + hex +
name (the rows the creator approved in TASK 60). A ComboBox cannot do that with one
ItemTemplate - WPF copies it into the read-only SelectionBoxItemTemplate - so
Helpers/ClosedBoxTemplateSelector.cs picks by the ContentPresenter's templated
parent: the ComboBox for the closed box, the ComboBoxItem for a row. Verified
against WPF with a throwaway probe, not assumed.
- The swatch is painted by the THEME (Helpers/HexToBrushConverter.cs, registered as
HexToBrush) - the hand-painted SolidColorBrush(Color.FromRgb(...)) in the old
click handler was the exact anti-pattern the theme forbids. The swatch also carries
a 1px #2a3a5e border now, so black and dark swatches are visible on the dark menu
(the follow-up TASK 60 left open).
- The hex field stays (60px, editable): a colour outside the palette can still be
typed, and the drop-down then carries that hex as a NAMELESS entry ("no name" is the
honest answer). The palette's name moved out of TASK 62's TextBlock into the
drop-down's closed box.
- The hand-built menu, its ContextMenu/MenuItem/SolidColorBrush code and
WebcamBorderColorPicker_Click are gone.
MODEL: SceneElement.BorderColorName -> BorderColorEntry (the palette entry for the
current hex, with its name; setting it writes the hex back) + BorderColorOptions (the
palette plus the custom entry), both raised when BorderColor changes.
BorderColorPalette gains EntryFor(hex) and OptionsFor(hex); NameOf delegates.
Guards: ytLive.Tests/BorderColorPickerTests.cs (the ONE test for this change - the
model, the panel, and the REAL widget: with the app's theme style and the panel's own
templates the closed box names the colour and the rows show the hex AND the name).
The TASK 60 guard (BorderColorPaletteTests) was updated because the mechanism it
asserted - a code-built menu - no longer exists; it now guards the new wiring (the
drop-down is bound to the palette and neither the panel nor the code-behind carries a
second list of colours).
Full suite: 435/435 passed, 0 warnings.
The creator (2026-10-21), on Live -> Layers -> webcam -> Properties:
"the Y and H boxes under webcam properties should be the same width as the X and W
boxes and those widths should be fixed to accomodate the max number of possible
digits providing the geometry values"
"also the border color drop drown box content should also include the name of the
color next to the hex value as they in the drop-down list box"
TASK 61 - one fixed width for the four geometry fields.
The row is a DockPanel, and WPF sizes an element to its CONTENT unless it is told
otherwise, while the LAST child of a DockPanel fills the remaining space. So X/W (not
last) were as wide as their text and Y/H (last) stretched across the row - two widths
for the same kind of field. Now all four carry Width="44" and the rows set
LastChildFill="False" (without it the last field ignores its own Width and fills anyway).
44px is the measured width of "-1920" in the app's font at 11px (the largest geometry
value - the master frame is 1920x1080 - plus a sign) plus the field's padding and
border. Docs: https://learn.microsoft.com/en-us/dotnet/api/system.windows.controls.dockpanel.lastchildfill
The guard MEASURES the widest value with WPF's FormattedText instead of asserting a
magic number, so a font change cannot silently make the field too narrow:
https://learn.microsoft.com/en-us/dotnet/api/system.windows.media.formattedtext
TASK 62 - the border field names its colour.
SceneElement.BorderColorName carries the palette's name for the current colour
("Crimson") and is raised when the colour changes; it is EMPTY for a custom hex the
creator typed, because "no name" is the honest answer. BorderColorPalette.NameOf
changed to match (it used to fall back to the hex itself; the TASK 60 test assertion
was updated with it). The hex field keeps a fixed width (60) so the name sits right
next to the hex instead of drifting to the row's far edge - the same trap as TASK 61.
Guards: ytLive.Tests/GeometryFieldWidthTests.cs, ytLive.Tests/BorderColorNameTests.cs
Full suite: 435/435 passed, 0 warnings.
The creator: "under Live->Layers->webcam->Properties->border color: in the drop
down box, the #hex values are good, but add a corresponding color name/label next
to the value."
Each row now reads "#e94560 Crimson" - the hex stays exactly as it was, the
colour's name goes next to it (dimmed #a0a0b0 so the hex reads first), and the
tooltip becomes "Crimson (#e94560)".
The 14 colours were a hard-coded string[] inside the click handler - a list of
bare strings cannot carry a name, and a list hidden in UI code cannot be asserted
on. They now live in Models/BorderColorPalette.cs: NamedColor(Hex, Name) +
BorderColorPalette.All (the single source of truth) + NameOf(hex), which answers
case-insensitively and falls back to the hex for a colour outside the palette.
The picker builds its menu from the catalogue and no longer knows any colour by
heart.
The names are chosen not to collide - the palette has two greens, two blues and
two warm colours: #00FF00 is Lime and #22c55e Emerald, #0000FF is Blue and
#3b82f6 Azure, #FF8800 is Orange and #f59e0b Amber.
Guard: ytLive.Tests/BorderColorPaletteTests.cs - every entry valid + named, no
hex or name repeated, the 14 legacy colours all still offered, NameOf answers,
and the old list is gone from the handler. 433/433 green, 0 warnings.
The creator's ruling on the webcam's properties: a "Shape" title above the
Mirror/Rect row; the drag hint indented under that row "to show parentage";
the same for Geometry, Border Color, Border Thickness; Remove and Blur indented
under Background; Strength indented under Blur.
One rule covers it: a title owns its content and the content is indented one
level (10px) under it - two levels where a title is itself nested (Strength
under Blur under Background). The titles are SemiBold 11px #a0a0b0 like the
ones already there.
The shape also stops being a toggle button that shows the NEXT action ("Round"
when the camera was a rectangle) and becomes a CHOICE: two segment options,
Rect | Circle, with Rect selected by default - which is what the creator asked
for ("Rect should be selected as a default if none exists"). The old
ShapeButtonText is gone.
The mutual exclusion lives in the MODEL: IsRectShape/IsRoundShape on
SceneElement, each setter flipping the shape through ToggleClipShape() (so the
pre-round rect is still stored/restored) and always re-raising, so a refused
write - the vertical Chat layout is rect-only (TASK 57) - makes the UI snap
back instead of sticking. Deliberately NOT a WPF RadioButton group: a group
unchecks its siblings by setting IsChecked in code, which makes WPF drop the
binding (stackoverflow 7376373; the same trap measured in 50980687/57275046).
The Circle option stays hidden where CanToggleClipShape is false, so the circle
is still not offered in the vertical Chat layout.
Guard: ytLive.Tests/PropertiesHierarchyTests.cs - the model half (Rect by
default, pick circle, pick rect, the locked Chat layout refuses the circle) and
the panel half (the Shape title owns both options, the circle is the gated one,
the hint is indented and follows the row, every titled block's content is at
10px, Strength at 20px). 432/432 green, 0 warnings.
The creator's locked table (2026-10-17) gives the Chat scene its own rules in
the 9:16 tier: RECT ONLY - the circle option is not offered - and a size that
is either the normal small tile or ENLARGED to fill one whole 607x540 area
(top or bottom). Unit 1 shipped the per-scene placement; this unit is the Chat
scene's own variant of it.
The rule lives on the MODEL, not on the button:
- Models/SceneElement.cs: ClipShape and ToggleClipShape() are now virtual.
- Models/WebcamSceneConfig.cs: VerticalShapeLocked (set per scene by the VM)
OVERRIDES the ClipShape property, so no writer can slip a circle in - the
toggle, the Shape button and the placement swap all go through it. The lock
is cleared BEFORE the 16:9 layout comes back, so the desktop shape returns.
- ViewModels/MainViewModel.Webcam.cs: CanToggleClipShape (the circle is NOT
offered in the vertical Chat layout - the Shape button disappears, it is not
merely greyed out), IsChatSceneCamera, ResizeWebcamInVerticalTier.
- Models/VerticalCameraLayout.cs: FillsArea (the "enlarged" state, derived -
no new column) and SizeFor - the Chat camera's TWO sizes, the tile or the
whole area, whichever is nearer the requested width, so the resize handle
has two detents instead of any size in between.
- An enlarged camera FILLS the area its centre is in (top or bottom), so
dragging it up/down swaps the areas.
- The Chat camera is auto-tiled like the Live one when the vertical tier is
picked - otherwise the vertical chat stream has no camera at all.
- Controls/PreviewPane.xaml.cs: the resize routes through the VM; the drag
assigns, lets the model clamp into the band, then snaps (so the enlarged
camera can be dragged from the top area to the bottom one).
Test: ytLive.Tests/VerticalChatCameraLayoutTests.cs - the ONE Good Dog test for
the unit: the vertical tier is picked -> the Chat camera comes into the band as
a small RECT tile -> the circle option is not offered and cannot be set even on
the model -> dragged up and enlarged it fills the TOP area exactly -> back to
16:9 the desktop layout is restored exactly and the circle option is offered
again. 430/430 tests pass, 0 warnings.
Research (the creator's table is the established practice, not our invention):
- Streamlabs' vertical guide: "splitting the screen in half horizontally,
placing the camera feed in the top half and the main content on the bottom
(or vice versa) may be the bet", and a just-chatting vertical wants the
camera "to take up most of the screen"
(streamlabs.com/content-hub/post/overlays-vertical-and-horizontal-streaming)
- Bloopbot's vertical overlay docs describe the same per-layer model we use at
scene granularity: "move or resize a layer on Vertical and it stops being
Auto-placed. It keeps the place you gave it, and the horizontal layout is not
touched" (bloopbot.com/docs/vertical-overlays-twitch-dual-format) - our
swap-at-tier-change, stored per scene.
- Landmine recorded: "about the bottom 560 px of the vertical video can be
covered by Twitch's chat and player controls on phones" (Bloopbot) - the Chat
camera's enlarged BOTTOM area may be half-hidden by the platform chrome;
TASK 53's safe-zone work decides that.
Memory in the same commit: ai.md (the Chat rules, the shape lock, the tests),
TASKS.md + TASKS/task-57-vertical-camera-layout.md (TASK 57 complete), HANDOFF.md,
MyMistakes.md (3 recipes: lock the model property not the UI button; two detents
for a discrete size set; the edit tool cannot match an oldString with an em
dash), Models/ViewModels/Controls index rows.
The vertical tier is a centred band crop of the SAME 1920x1080 master (band x
656.25, w 607.5, h 1080), so the 16:9 camera placement (x~1408) falls outside the
cropped window and the creator is simply not in the vertical stream. Each scene
now keeps its own vertical position, size and shape; switching back to 16:9
restores the desktop layout exactly (the creator's locked table, 2026-10-17).
Geometry only - NO render-path change. The preview and the compositor both read
the element's own X/Y/W/H + ClipShape, so the tier switch swaps the LIVE geometry:
- Models/VerticalCameraLayout.cs (new): the pure math - the band, its two 607x540
areas, the six spots (top/bottom x left/centre/right), the 32px inset and the
270x152 default tile (480x270 in the 1080x1920 output) in the bottom-right spot,
the corner the 16:9 default webcam uses.
- Models/WebcamSceneConfig.cs: the vertical placement lives in seven additive
columns (VerticalX/Y/Width/Height/ClipShape/RectWidth/RectHeight; NULL = "this
scene has no vertical placement yet"). The 16:9 layout stays in the old columns
and is parked in the transient Landscape* fields while the vertical tier is
live; Begin/EndVerticalLayout + CommitLiveLayoutToVertical do the swap. The
X/Y/W/H overrides clamp every write into the band - outside it the camera is
invisible in the vertical output.
- Models/SceneElement.cs: X/Y/Width/Height became virtual so the derived element
constrains every writer (drag, resize handle, typed fields) in ONE choke point
instead of three writers each re-implementing the rule.
- ViewModels/MainViewModel.Webcam.cs + .Streaming.cs: IsVerticalTier/VerticalBand,
ResolveVerticalCameraLayout(s) (the tier swap), MoveWebcamInVerticalTier /
SnapWebcamInVerticalTier (the six-spot snap, by the tile's centre),
EnsureVerticalCameraLayout; ApplyStreamQuality is the tier-change hook. The
Live scene gets its small tile automatically on the first vertical switch (the
vertical stream would otherwise have no camera at all); the other scenes keep
their 16:9 placement until the creator drags them into the band.
- Controls/PreviewPane.xaml.cs: the drag/resize route through the VM snap under
the vertical tier instead of free-floating over the master.
Controls/LeftPanel.xaml: the webcam properties gained a Geometry section
(X/Y/W/H) for the manual entry the creator asked for, bound to the LIVE
placement, gated on the VM's IsWebcamSelected (NOT SelectedElement.IsWebcam -
the TASK 51 test finds that panel by binding text and would match twice).
- The store: seven guarded ADD COLUMNs, the INSERT/SELECT extended, and the
X/Y/W/H/ClipShape columns stay the 16:9 layout - while the vertical tier is
live the save writes the parked values there and the live ones into Vertical*.
Test: ytLive.Tests/VerticalWebcamLayoutTests.cs - the ONE Good Dog test. The
vertical tier brings the Live camera INTO the band as a small tile; dragging it to
the top-right lands it top-right inside the band; back to 16:9 the desktop layout
is restored exactly (1408/778/480x270); both placements survive a save + reload.
Full suite 429/429, 0 warnings. LayerReorderPersistenceTests.RealMouseDrag fails
ALONE on a clean tree in this environment - pre-existing flake, proven by stashing
this work, not a regression.
Derivative work: OBS has no built-in per-aspect-ratio layout storage - the
maintainers' answer is "create a second scene and add the scene you want to send
as source" (obsproject.com/forum/threads/161307) - and Streamyard's dual-aspect
guide says the same ("no built-in way to store separate layouts per aspect ratio",
so you rely on manual workarounds and plugins):
https://streamyard.com/blog/dual-aspect-ratio-streaming-tool
Our per-scene, per-tier stored placement, resolved on the tier change, is the
step past both.
Memory in the same commit: ai.md (new section), TASKS.md + TASKS/task-57-*.md
(Unit 1 shipped, Unit 2 = the Chat scene still open), HANDOFF.md, MyMistakes.md
(the per-tier geometry-swap recipe, the binding-text panel trap, the store's
webcam-identity rule) and the Models/Services/ViewModels/Controls index rows.
gramps